AHPF Series
Low Flow Air Process and Liquid Circulation Heaters

AHPF Series : Low Flow Air Process and Liquid Circulation Heaters
Kliknìte zde pro vìtší obrázek.

7,650.00  Kč *
     AHPF-061

  316 Stainless Steel Construction
  Air/Gas Flow up to 15 CFM
  Air/Gas Outlet Temperatures up to 800°F (430°C)
  Pressures up to 100 PSI*
  50 Watts/Square Inch**

The AHPF series heaters are used to heat low flows of air, gas, water, or aqueous solutions. Applications include those where clean air is necessary, as in laboratories and environmental testing areas. The stream of air is heated by passing over an enclosed heated surface rather than directly over resistance elements. This method assures that no foreign matter will enter the stream of flow. The AHPF series is also used as a miniature circulation heater for small volume of liquids as in photographic developer solution, chemicals, dyes, and inks. Calculate the flow rate, temperature rise, or power requirement as described on page J-17. For heating liquids, use the formulas on pages Z-10 or Z-41. The Thermocouple “T” fitting AHPF-NPT12 can be used with the subminiature thermocouple probes and with the SSLK series stainless steel compression fittings (see the OMEGA Complete Temperature Measurement Handbook and Encyclopedia®) and with stainless steel compression fittings (model SSLK-18-14) to monitor or control temperature at the outlet of the AHPF series heaters.

SPECIFICATIONS
Cross Sectional Area: 0.152 sq. inches
Pressure Rating: Up to 100 PSIG
Wattage Tolerance: +5, -10% or better at the voltage specified
Outside Diameter: 11/4" (32 mm)
Inlet: Male 3/8" NPT
Outlet: 1/2" NPT

Model Number Volts Watts Heated Length in (mm) Watts/Inch* Maximum CFM Length in (mm) Weight lb (kg)
120 VAC Models
AHPF-0611204004 (102)91156 (152)1.00 (0.45)
AHPF-0811206006 (152)94158 (203)1.18 (0.54)
AHPF-10112010008 (203)1201510 (254)1.37 (0.62)
AHPF-121120120010 (254)1151512 (305)1.55 (0.70)
120/240 VAC Models**
AHPF-062120
240
100
400
4 (102)
4 (102)
23
91
15
15
6 (152)1.00 (0.45)
AHPF-082120
240
150
600
6 (152)
6 (152)
23
94
15
15
8 (203)1.18 (0.54)
AHPF-102120
240
250
1000
8 (203)
8 (203)
30
120
15
15
10 (254)1.37 (0.62)
AHPF-122120
240
300
1200
10 (254)
10 (254)
29
115
15
15
12 (305)1.55 (0.70)
*Indicates Watts per inch of heated length. Use the table above to determine minimum required flow rates.
**These air heaters can be operated on either 120 or 240 Volts. Specifications are shown for either 120 or 240 Volt operation.


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 AHPF-061    7,650.00 Kč   120 V, 400 W low flow air process and liquid circulation heater
 AHPF-081    8,820.00 Kč   120 V, 600 W low flow air process and liquid circulation heater
 AHPF-101    9,270.00 Kč   120 V, 1000 W low flow air process and liquid circulation heater
 AHPF-121    9,900.00 Kč   120 V, 1200 W low flow air process and liquid circulation heater
 AHPF-062    7,650.00 Kč   240 V, 400 W low flow air process and liquid circulation heater
 AHPF-082    8,820.00 Kč   240 V, 600 W low flow air process and liquid circulation heater
 AHPF-122    9,900.00 Kč   240 V, 1200 W low flow air process and liquid circulation heater
 AHPF-102    9,270.00 Kč   240 V, 1000 W low flow air process and liquid circulation heater
 AHPF-NPT12    2,700.00 Kč   T/C FITTING
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Pøíklad objednávky: (1) AHPF-101 120 V, 1000 W low flow air process and liquid circulation heater = 9,270.00 Kč

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Manuály
   Stáhnout  In Line Heaters
 Souvísející odkazy
   AHP Series: T Type air Process Heaters For In-Line Air and Gas Heating