CN142 Series
Universal Temperature Process Controller

CN142 Series : Universal Temperature Process Controller
Kliknìte zde pro vìtší obrázek.

3,450.00  Kč *
     CN142-R1-R2-DC3

  Dual Display
  J, K, R, S Thermocouple Inputs
  Process Inputs
  RTD and Thermistor Inputs
  3 Outputs
  Alarm, Event and Timer Functions
  On/Off or PID Control
  3 Step Ramp Soak Feature
  Autotune
  Digital Input
  Password Protection
  24 to 230 Vac/Vdc
  Optional RS485
  Optional Software with Configuration Module

Monitor and control temperature or process applications with precision using the CN142 Series controllers. The CN142 Series provides dual LED displays for local indication of process value and setpoint value. Control methods include on/off, PID, auto-tune and manual-tune. Controller includes a 3 setpoint ramp/soak control feature, and also includes alarm, event and timer functions with optional RS485 communications. An optional software package CN-SW-HW-KIT includes cable and configuration module for quick configuration of units, as well as copying configuration parameters from one unit to another. The configuration module can also be purchased separately and with a built-in battery feature, configuration settings can be downloaded and copied to the module without power applied to controller. The module can then be plugged into a new unit without power applied and the configuration setting can be transferred for easy set-up for multiple units.

Specifications
Front Bezel: 32 x 74 mm (1.6 x 2.9")
Panel Depth: 53 mm (2.1")
Supply Voltage: 24 to 230 Vac/Vdc ±15%, 50/60 Hz
Power Consumption: 2 W
Display: Two 4-digit, 10 mm (0.4") green (SV), 8 mm (0.3") red (PV)
Accuracy: ±0.5°C temperature, 0.2% reading
Resolution: 1°/0.1° 10 µV process
A/D Conversion: Sigma-delta
Reading Rate: Programmable
Digital Filter: Programmable
Operating Conditions:
    Temperature: 0 to 45°C (32 to 113°F)
    Humidity: 35 to 95 RH%
Material:
    Enclosure: Noryl UL94V1 self-extinguishing
    Front Panel: PC ABS UL94V0 self-extinguishing
Weight: 112 g (3.95 oz)
Front Panel: IP65 (with gasket), box IP30, terminal blocks IP20
Inputs:
    Thermocouple: J, K, R, S
    RTD: Pt100, Pt500, Pt1000, Ni100
    Thermistor: PTC1K, NTC10K (B 3435K), NTC 2252 O
    Process: 4 to 20 mA, 0 to 10V, 0 to 40 mV, potentiometer 0 to 6/160 KO
Sampling Time: 4,1 ms (frequency 242 Hz)
1 Digital Input: ½ setpoint selection, hold, run (only for thermocouple, 0 to 10V, 0/4 to 20 mA, 0 to 40 mV)
Outputs:
    2 Relays: 8 A to 250 Vac and 5 A to 250 Vac
    DC Pulse: 12 Vdc, 30 mA
Serial Communication: RS485 Modbus ® RTU, master/slave
Control Algorithms: On/off with hysteresis, P, PI, PID, PD, time proportional
Tuning: Manual or autotune
Data Protection: Lock of command/ alarm setpoint; access to parameters by password
Alarm Modes: Absolute/threshold, band, high/low deviation; alarm with optional manual reset
Soft-Start: Rising gradient expressed as °C or °F/hour
Programmer Function: Start/stop, 3 steps pre-programmed cycle
Timer Function: Controller function + single/double timer


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 CN142-R1-R2-DC3    3,450.00 Kč   Controller, 3 outputs, Relay, Relay, dc Pulse
 CN142-R1-DC2-C4    4,050.00 Kč   Controller, 2 outputs, Relay, dc Pulse, RS485
 CN-SW-HW-KIT    4,980.00 Kč   Software, cable and configuration module kit
 CN-CONFIG-MODULE    2,310.00 Kč   Configuration memory plug in module
 CNQUENCHARC    420.00 Kč   Noise suppresion kit, 100 to 230 Vac
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: Comes complete with operator’s manual.

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Manuály
   Stáhnout  CN142 Series - Temp-Process Controller
 Software
   Stáhnout CN-SW-LABSOFTVIEW Software