CN63100 Series
1/16 DIN Autotune Temperature Controllers

CN63100 Series : 1/16 DIN Autotune Temperature Controllers
Kliknìte zde pro vìtší obrázek.
  PID Control With Reduced Overshoot
  On-Demand Auto-Tuning of PID Control Settings
  NEMA 4X (IP65) Bezel
  Dual LED Displays for Simultaneous Indication of Temperature and Setpoint
  Status Indicators for Outputs and Control Modes
  Thermocouple or RTD Inputs
  Optional Dual Alarm Inputs
  Optional Linear DC Output, Control or Retransmission (0 to 10 V, 0/4 to 20 mA)
  Manual/Automatic Control Modes
  Setpoint Ramping For Process Startup
  Sensor Error Compensation (Offset) and Break Detection
  Heating and Optional Cooling Outputs
  Parameter Security Via Programmable Lockouts
  Field-Replaceable Output Board
  Optional RS485 Serial Communications

The CN63100 Series Controller accepts signals from a variety of temperature sensors (thermocouple or RTD), precisely displays the process temperature, and provides an accurate output control signal (time proportional or linear DC) to maintain the process at the desired temperature. The controller comprehensive yet simple programming allows it to meet a wide variety of application requirements. The controller operates in the PID control mode for both heating and cooling, with on-demand auto-tune, which will establish the tuning constants. The PID tuning constants may be fine-tuned by the operator at any time and then locked-out from further modification. The controller employs a unique overshoot suppression feature, which allows the quickest response without excessive overshoot. The unit can be transferred to operate in the manual mode, providing the operator with direct control of the output. The controller may also be programmed to operate in the “ON/OFF” control mode with adjustable hysteresis. A second setpoint is available on select models to allow quick selection of a different setpoint setting. Dual 4-digit displays allow viewing of the process temperature and setpoint simultaneously. Front panel indicators inform the operator of the controller and output status. On many models the main control output and the alarm outputs are field replaceable. Optional alarm(s) can be configured to activate according to a variety of actions (absolute high or low, deviation high or low, band in or out, with adjustable hysteresis. A standby feature suppresses the alarm during power-up until the temperature stabilizes outside the alarm region. The second alarm can be configured as a secondary PID output (heat/cool applications).


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 CN63100-R1    6,210.00 Kč   Single output, relay
 CN63100-R1-R2-AL    7,530.00 Kč   Dual output, relay/relay, alarm
 CN63100-R1-R2-AL-RSP    9,000.00 Kč   Dual output, relay/relay, alarm, remote setpoint
 CN63100-DC1    6,210.00 Kč   Single output, DC pulse
 CN63100-DC1-R2-AL    7,530.00 Kč   Dual output, DC pulse/relay, alarm
 CN63100-R1-R2-AL-C4    9,510.00 Kč   Dual output, relay/relay, alarm, RS485
 CN63100-DC1-R2-AL-C4    9,510.00 Kč   Dual output, DC pulse/relay, alarm, RS485
 CN63100-R1-R2-F3    10,140.00 Kč   Dual output, relay/relay, analog control or re-transmission
 CN63100-R1-R2-F3-RSP    9,510.00 Kč   Dual output, relay/relay, analog control or re-transmission, remote setpoint
 CN63100-R1-R2-F3-C4    9,810.00 Kč   Dual output, relay/relay, analog control or re-transmission, RS485
 CN63100-R1-LV    7,080.00 Kč   Single output, relay
 CN63100-R1-R2-AL-LV    8,040.00 Kč   Dual output, relay/relay, alarm
 CN63100-R1-R2-AL-RSP-LV    9,540.00 Kč   Dual output, relay/relay, alarm, remote setpoint
 CN63100-DC1-LV    7,080.00 Kč   Single output, DC pulse
 CN63100-DC1-R2-AL-LV    8,040.00 Kč   Dual output, DC pulse/relay, alarm
 CN63100-R1-R2-AL-C4-LV    9,690.00 Kč   Dual output, relay/relay, alarm, RS485
 CN63100-DC1-R2-AL-C4-LV    10,020.00 Kč   Dual output, DC pulse/relay, alarm, RS485
 CN63100-R1-R2-F3-LV    10,680.00 Kč   Dual output, relay/relay, analog control or re-transmission
 CN63100-R1-R2-F3-RSP-LV    10,020.00 Kč   Dual output, relay/relay, analog control or re-transmission, remote setpoint
 CN63100-R1-R2-F3-C4-LV    10,500.00 Kč   Dual output, relay/relay, analog control or re-transmission, RS485
 CN6-48100    980.00 Kč   Single relay output module
 CN6-48111    1,920.00 Kč   Dual relay/relay output module
 CN6-48200    980.00 Kč   Single DC pulse output module
 CN6-48211    1,920.00 Kč   Dual output, DC pulse/relay output module
 CN6-RBDLA210    1,920.00 Kč   Output module, single output, Form-C relay, 1 alarm
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: Comes with complete operator’s manual.
For “-C4” RS485 option, software is a free download from omega.com.
 Pøíklad objednávky: (1) CN63100-R1-R2-AL 85 to 250 Vac , dual output, relay/relay, with alarm = 7,530.00 Kč

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Manuály
   Stáhnout  CN63100 and CN63300 Series - 1/16 DIN Temperature Process Controllers
 Software
   Stáhnout DP6 Software
 Souvísející odkazy
   CP, DPP, RHS,RHP,RS Series: Panel Punches and Hole Saws for Thermocouple Connectors, DIN Size Controllers and Panel Meters