CN9000A Series
1/16 DIN Autotune PID/On-Off Controllers with Modular Output Options

CN9000A Series : 1/16 DIN Autotune PID/On-Off Controllers  with Modular Output Options
Kliknėte zde pro vėtší obrázek.
  1/16 DIN Cutout
  User Selectable Input from 9 Thermocouple Types or RTD Input
  Clear 3 1/2 Digit High Brightness Green LED Display
  0.1° Resolution to 200°
  Constant Setpoint Deviation Indication
  Auto/Manual Output Control
  User Select from Autotune PID, PI, PD, P or On/Off Control
  Independent Second Setpoint and Output Models
  Comprehensive Alarm Features Deviation, Full Scale, Loop Break with Latching Option
  Fault Indication for Sensor Burnout, Sensor Short, Heater Break and Process Diagnostics
  Min/Max Data Storage and Autotune Diagnostics Eliminates Need for Chart Recorder
  Optional 24 Vac Power
  Field Replaceable Output Modules

The CN9000A digital temperature controllers feature high accuracy and reliability, and the sophisticated PID with approach control for optimal control during start-up and steady-state operation. These units are well suited for a broad range of applications, and are easy to install and operate. The unique, sophisticated autotune algorithm will calculate the optimum PID values, and additionally recommends the best value for cycle time. For most applications, the user need only select the desired input type, simply by using the front pushbuttons. The autotune parameters can be changed by the operator at any time, allowing the operator to fine tune the controller to an individual process.

The microprocessor holds all data in non-volatile memory, with the ability to retain data for 10 years with no power. The CN9000A has a large, 3 1/2 digit green LED readout, with auxiliary indicators for each output, and 3 LED’s to indicate deviation from setpoint.

Selection of all operational controls is made through the keys on the front panel, with the display prompting the user through each step. After the parameters have been set, they can be locked in, simply by removing a jumper located behind the front bezel. The user can select the control mode and parameters, display resolution (1 or 0.1°), and units (°F/°C). The operator can also utilize the ranging feature, which limits the range in which the setpoint may be chosen, or lock out a user from changing the setpoint. The new single setpoint controller has rear termination. The optional second setpoint and output of the CN9000A model can be set for proportional, on-off or latching limit control, and can be set as either a tracking or non-tracking setpoint. Cycle time, proportional band and on-off deadband are all set independently of the primary setpoint.


 Číslo modelu  Cena (bez DPH)  Popis  Ks
 CN9110A    7,500.00 Kč   Autotune controller with thermocouple/2-wire RTD input and relay output
 CN9111A    8,250.00 Kč   Autotune controller with thermocouple/2-wire RTD input and dual relay output
 CN9112A    8,250.00 Kč   Autotune controller with thermocouple/2-wire RTD input, relay output (output 1) and Pulse output (output 2)
 CN9120A    7,500.00 Kč   Autotune controller with thermocouple/2-wire RTD input and pulse output
 CN9121A    8,250.00 Kč   Autotune controller with thermocouple/2-wire RTD input, pulse output (output 1) and relay output (output 2)
 CN9122A    8,250.00 Kč   Autotune controller with thermocouple/2-wire RTD input, dual pulse output
 CN9131A    10,050.00 Kč   Autotune controller with thermocouple/2-wire RTD input, 1 A SSR output (output 1) and relay output (output 2)
 CN9141A    10,050.00 Kč   Autotune controller with thermocouple/2-wire RTD input, 4 to 20 mA output (output 1) and relay output (output 2)
 CN9151A    10,050.00 Kč   Autotune controller with thermocouple/2-wire RTD input, 0 to 10 Vdc output (output 1) and relay output (output 2)
 CN9210A    7,500.00 Kč   Autotune controller with 3-wire RTD input and relay output
 CN9211A    8,250.00 Kč   Autotune controller with 3-wire RTD input and dual relay output
 CN9212A    8,250.00 Kč   Autotune controller with 3-wire RTD input, relay output (output 1) and pulse output (output 2)
 CN9220A    8,250.00 Kč   Autotune controller with 3-wire RTD input and pulse output
 CN9221A    8,250.00 Kč   Autotune controller with 3-wire RTD input, pulse output (output 1), and relay output (output 2)
 CN9222A    8,250.00 Kč   Autotune controller with 3-wire RTD input and dual pulse output
 CN9231A    10,200.00 Kč   Autotune controller with 3-wire RTD input, 1A SSR output (output 1), and relay output (output 2)
 CN9241A    10,050.00 Kč   Autotune controller with 3-wire RTD input, 4 to 20 mA output (output 1), and relay output (output 2)
 CN9251A    10,050.00 Kč   Autotune controller with 3-wire RTD input, 0 to 10 Vdc output (output 1), and relay output (output 2)
 CN9111A-230VAC    8,250.00 Kč   1/16 DIN, Relay, Relay, 230VAC
 CN9111A-24VAC    8,250.00 Kč   1/16 DIN, Relay, Relay, 24VAC
 CN9141A-230VAC    10,050.00 Kč   1/16 Din, 4-20 mA, Relay, 230VAC
 CNQUENCHARC    420.00 Kč   Noise Suppression RC snubber (2 leads), 110 to 230 Vac. Can be used with any CN9000A controller with mechanical relay output.
 CN9000-14    390.00 Kč   1/4 DIN mounting adaptor
 CN9000-18    390.00 Kč   1/8 DIN mounting adaptor
 BD9011A    1,620.00 Kč   Dual Relay, field installable module
 BD9021A    1,620.00 Kč   Pulse/Relay, field installable module
 BD9031A    2,520.00 Kč   1 A SSR and Relay, field installable module
 BD9041A    2,820.00 Kč   4 to 20 mA and Relay, field installable module
 BD9051A    2,670.00 Kč   0 to 10 Vdc and Relay field installable module
 BD9012A    1,440.00 Kč   Relay/Pulse field installable module
 BD9022A    1,620.00 Kč   Dual Pulse field installable module
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddėlení, e-mail: viz. kontaktní informace)
 Pøíklad objednávky: (1) CN9121A Autotune controller with thermocouple/2-wire RTD input, pulse output (output 1) and relay output (output 2) = 8,250.00 Kč

(1) (2) (3)
CN9 A
Popis voleb
(1) Input
  Vyberte 1 pro T/C or 2-wire RTD, 2 pro 3-wire RTD
(2) Output 1
  Vyberte 1 pro Relay, 2 pro Pulse, 3 pro 1 A SSR, 4 pro 4 to 20 mA, 5 pro 0 to 10 Vdc
(3) Output 2
  Vyberte 0 pro no output, 1 pro Relay, 2 pro Pulse
 Poznámka: ne všechny kombinace jsou správné, ovėøte si správnost čísla modelu.

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Manuály
   Stáhnout  CN9000A Series - 1/16 DIN Autotune Controller
 Souvísející odkazy
   CN132 Series: 1/32 DIN Autotune Temperature/Process Dual Setpoint Controllers
   CP, DPP, RHS,RHP,RS Series: Panel Punches and Hole Saws for Thermocouple Connectors, DIN Size Controllers and Panel Meters