CNI8C and CNIS8C
1/8 DIN Ultra Compact Case Temperature, Process and Strain PID Controllers

CNI8C and CNIS8C : 1/8 DIN Ultra Compact Case Temperature, Process and Strain PID Controllers
Kliknìte zde pro vìtší obrázek.
  Ultra Compact 1/8 DIN Controller
  Full Autotune PID Control
  Built-In Excitation
  NEMA 4 (IP65) Bezel
  RS232, RS422/485 or Modbus Communication, Menu Selectable

The ultra-compact CNi8C and CNiS8C controllers are similar to the full size i8 in an ultra-compact enclosure. Only 51 mm (2") behind the panel. The i8C/iS8C display can be programmed to change color between GREEN, AMBER, or RED at any setpoint or alarm point. The i8C/iS8C includes the option of both RS232 and RS485 in 1 instrument with both MODBUS® serial protocol and the straightforward Omega® ASCII protocol.

The i8C comes standard with your choice of 2 control or alarm outputs in almost any combination: solid state relays rated at 0.5 A @ 120/240 Vac; Form "C" SPDT relays rated at 3 A @ 120/240 Vac; pulsed 10 Vdc output for use with an external SSR; or analog output (0 to 10 Vdc or 0 to 20 mA) selectable for control or retransmission of the process value.

The universal temperature and process instrument offer a selection of 10 thermocouple types as well as 2-, 3- or 4-wire RTDs, process voltage and current. The i8C controller is ideal for use with transmitters and amplified transducers. Built-in excitation is standard (24 Vdc @ 25 mA). The units handle 0 to 20 mA process current and process voltage in 3 scales: 0 to 100 mV, 0 to 1V, and 0 to 10V.

The strain/process instrument (model iS) meters and controllers measure inputs from load cells, pressure transducers, and most any strain gage sensor. Input ranges include 0 to 100 mVdc; -100 mVdc to 1 Vdc; 0 to 10 Vdc in addition to 0 to 20 mA. Excitation for transducers of 5 V and 10 V is standard.

The enclosure has a NEMA 4 (IP65) rated front bezel and electronics are removable from the front panel.


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 CNi8C22    10,050.00 Kč   Temperature/process controller with two solid state relays (SSR's): 0.5 A @ 120/240 Vac continuous
 CNiS8C22    11,250.00 Kč   Strain/Process with two solid state relays (SSR's): 0.5 A @ 120/240 Vac continuous
 CNi8C23    10,050.00 Kč   Temperature/process controller with SSR and relay: Form C SPDT 3 A @ 120 Vac, 3 A @ 240 Vac
 CNiS8C22    11,250.00 Kč   Strain/Process with SSR and relay: Form C SPDT 3 A @ 120 Vac, 3 A @ 240 Vac
 CNi8C22-C24    12,000.00 Kč   Temperature/process controller with two solid state relays (SSR's): 0.5 A @ 120/240 Vac and with isolated RS232 and RS485
 CNiS8C24-C24    13,200.00 Kč   Strain/Process with SSR and pulsed 10 Vdc @ 20 mA (for use with external SSR) and with isolated RS232 and RS485
 -FS   Kontaktujte prodejce  Factory Setup and Configuration, $50 Charge
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: 1. "-DC" and "-C24" not available with excitation.
2. Analog output is not available with "-AL" units.
3. "-SM" option not avaialbe on CNiS strain models.


 Pøíklad objednávky: (1) CNi8C33 1/8 DIN compact universal temperature process controller with 2 relay outputs = 10,050.00 Kč

(1) (2) (3) (4) (5)
Popis voleb
(1) Model
  Vyberte CNi8C pro Temperature/Process with 2 Control Outputs Compact Case, CNiS8C pro Strain/Process with 2 Control Outputs Compact Case
(2) Control Outputs #1 & 2 Direct (Cool) or Reverse (Heat) Acting
  Vyberte 22 pro Two solid state relays (SSRs) 0.5 A @ 120/240 Vac continuous, 23 pro SSR and relay Form C SPDT 3 A @ 120 Vac 3 A @ 240 Vac, 24 pro SSR and pulsed 10 Vdc @ 20 mA (for use with external SSR), 33 pro 2 Relays Form C SPDT 3 A @ 120 Vac 3 A @ 240 Vac, 42 pro Pulsed 10 Vdc @ 20 mA (for use with external SSR) and SSR, 43 pro Pulsed 10 Vdc @ 20 mA (for use with external SSR) and relay Form C SPDT 3 A @ 120 Vac 3 A @ 240 Vac, 44 pro Two pulsed 10 Vdc @ 20 mA (for use with external SSR), 52 pro Analog Output selectable as either control or retransmission of process value 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and SSR, 53 pro Analog Output 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and Relay, 54 pro Analog Output 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and Pulse 10 Vdc
(3) Network Options
  Vyberte prázdné pole pro no network option, -C24 pro Isolated RS232 and RS485
(4) Power Supply
  Vyberte prázdné pole pro Standard power input 90-240 Vac/dc 50-400 Hz, -DC pro 12-36 Vac/dc 24 Vac
(5) Factory Setup
  Vyberte prázdné pole pro no option, -FS pro Factory Setup and Configuration
 Poznámka: ne všechny kombinace jsou správné, ovìøte si správnost èísla modelu.

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Manuály
   Stáhnout  CNi8, CNi8C, CNi8D, CNi16, CNi16D, CNi32 - Temperature & Process -SM Version (Simplified Menu)
   Stáhnout  CNi8C Series - -SM Version (Simplified Menu)
   Stáhnout  CNi8C Series - Quick Start Manual i8 Compact Series
   Stáhnout  CNiS8C - Compact Process & Strain Gauge Controller
   Stáhnout  CNiS8 - i Series Controller Quick Start Manual
   Stáhnout  CNi8, CNi8DH, CNi8DV Series - i Series Controller Quick Start Manual
   Stáhnout  CNi8, CNi8DH, CNi8DV - i Series Controller Manual
   Stáhnout  CNi/CNiS/CNiTH 8,8C,8D,16,16D - -EIT/-C4EIT Option - Embedded Ethernet for iSeries Monitor/Controller