D3000 and D4000
OMEGABUS Computer-to-Analog OutputModules

D3000 and D4000 : OMEGABUS Computer-to-Analog OutputModules
Kliknģte zde pro vģtšķ obrįzek.

8,430.00  Kč *
     D3131

  Analog Output Ranges: 0-1 V, ±1 V, 0-5 V, ±5 V, 0-10 V, ±10V, 0-20 mA, 4-20 mA
  Programmable High/Low Output Limits
  500 V rms Output Isolation
  Scaling in Engineering Units
  12-Bit Resolution
  Baud Rates: 300 to 38,400
  Output Protection: 240 Vac (Current Output), ± 30 V (Voltage Outputs)

The D3000 and D4000 computer-to-analog output interfaces are designed to be mounted remotely from a host computer and communicate with standard RS-232 and RS-485 serial ports. Simple ASCII commands are used to control a 12-bit digital-to-analog converter that is scaled to provide commonly used current and voltage ranges. An on-board microprocessor provides the communications interface and many intelligent analog output functions. These modules offer an extremely flexible, easy-to-use, and cost-effective approach to data acquisition. The D3000 and D4000 are compatible with the OMEGABUS ® D1000 and D2000 and may be used in any combination. Up to 124 modules may be strung on one set of wires. All modules are supplied with screw terminal plug connectors and captive mounting hardware. The connectors allow system expansion, reconfiguration, or repair without disturbing field wiring. Their small size allows them to be mounted in virtually any location or position including explosion-proof housings and DIN rails. Utility software (D1000-SW) is available upon request at no charge on an IBM-compatible disk. The D4000 modules offer several additional features. A slew rate may be programmed, which causes the output to ramp at an adjustable rate in either an increasing or decreasing direction. The ramp can be initiated and maintained by commands from the computer or with external switch closures to the module. The D4000 module provides a readback feature which allows the computer to verify the integrity of the output. The D4000 modules also include a watchdog timer circuit that can be set such that if the computer fails to communicate with the module after a preset time period, the module will reset itself to an adjustable default value. This feature minimizes the risks of communication failure. The A1000 RS-232 to RS-485 converter and repeater can be used if an RS-485 port is not available in your PC, and it is necessary to communicate long distances away. The A1000 also provides power for the modules. RS-232 modules can be used for distances less than 50 feet.

Common Specifications, D3000 and D4000 ANALOG OUTPUT
• Single channel analog output
     Voltage: 0-1 V, ± 1 V, 0-5 V, ± 5 V, 0-10 V, ± 10 V
     Current: 0-20 mA
• Input isolation to 500 V rms
• 12-bit measurement resolution
• Accuracy (integral and differential non-linearity): 0.1% FSR (max)
• Zero drift: ±30 µV/°C (voltage output) ±1.0µA/°C (current output)
• 1000 conversions per second
• Settling time to 0.1% FS 300 µs typical (1 ms max)
• Programmable output slew rate: 0.01 V/s (mA/s) to 10,000 V/s (mA/s) (D4000 only)
• Autozero and autocalibration-no adjustment pots
• Voltage compliance: ±12 V
• Output current, short circuit current: 5 mA min, 10 mA max

ANALOG OUTPUT READBACK (D4000)
• 8-bit analog-to-digital converter

DIGITAL INPUTS
• Voltage levels: ±30 V without damage
• Switching levels: High, 3.5 V min, low, 1.0 V max
• Internal pull-up resistors for direct switch input

COMMUNICATIONS
• RS-232, RS-485
• Up to 124 modules with A1000 converter/repeater, 32 without A1000
• User selectable channel address (via software command)
• Selectable baud rates: 300, 600, 1200, 2400, 4800, 9600, 19.2K, 38.4K
• ASCII format command/response protocol
• Parity: odd, even, none
• All communications setups (address, baud rate,parity) stored in nonvolatile memory using EEPROM
• Checksum can be added to any command or response
• Communications distance up to 10,000 feet with RS-485 modules

Power Requirements: Unregulated +10 V to +30 Vdc, 0.75 W max (voltage output), 1.0 W max (current output)
Case: ABS with captive mounting hardware
Connectors: screw terminal barrier plug (supplied)
Temperature Range: Operating: -25°C to 70°C
Storage: -25°C to 85°C
Relative Humidity: 0 to 95% non-condensing

Model No.Output RangeInput
      D3000 Series Output Module - Voltage Output
D3121± 1 VRS-232C
D3122± 1 VRS-485
D3131± 5 VRS-232C
D3132± 5 VRS-485
D3141± 10 VRS-232C
D3142± 10 VRS-485
D31610 to 1 VRS-232C
D31620 to 1 VRS-485
D31710 to 5 VRS-232C
D31720 to 5 VRS-485
D31810 to 10 VRS-232C
D31820 to 10 VRS-485
      D3000 Series Output Module - Current Output
D32510 to 20 mARS-232C
D32520 to 20 mARS-485
      D4000 Series Output Module - Voltage Output
D4121± 1 VRS-232C
D4122± 1 VRS-485
D4131± 5 VRS-232C
D4132± 5 VRS-485
D4141± 10 VRS-232C
D4142± 10 VRS-485
D41610 to 1 VRS-232C
D41620 to 1 VRS-485
D41710 to 5 VRS-232C
D41720 to 5 VRS-485
D41810 to 10 VRS-232C
D41820 to 10 VRS-485
      D4000 Series Output Module - Current Output
D42510 to 20 mARS-232C
D42520 to 20 mARS-485


 Čķslo modelu  Cena (bez DPH)  Popis  Ks
 D3131    8,430.00 Kč   RS-232C input, ±5 V output
 D3132    8,430.00 Kč   RS-485 input, ±5 V output
 D3141    8,430.00 Kč   RS-232C input, ±10 V output
 D3142    8,430.00 Kč   RS-485 input, ±10 V output
 D3171    8,430.00 Kč   RS-232C input, 0 to 5 V output
 D3172    8,430.00 Kč   RS-485 input, 0 to 5 V output
 D3181    8,430.00 Kč   RS-232C input, 0 to 10 V output
 D3182    8,430.00 Kč   RS-485 input, 0 to 10 V output
 D3251    8,430.00 Kč   RS-232C input, 0 to 20 mA output
 D3252    8,430.00 Kč   RS-485 input, 0 to 20 mA output
 D4121    10,710.00 Kč   RS-232C input, ±1 V output
 D4122    10,710.00 Kč   RS-485 input, ±1 V output
 D4131    10,710.00 Kč   RS-232C input, ±5 V output
 D4132    10,710.00 Kč   RS-485 input, ±5 V output
 D4141    10,710.00 Kč   RS-232C input, ±10 V output
 D4142    10,710.00 Kč   RS-485 input, ±10 V output
 D4251    10,710.00 Kč   RS-232C input, 0 to 20 mA output
 D4252    10,710.00 Kč   RS-485 input, 0 to 20 mA output
Obsah košķku Vyprįzdnit košķk Objednat
 * využijte možnost konzultovat ceny pųķmo s našimi prodejci  (tel: 596 311 899 - prodejnķ oddģlenķ, e-mail: viz. kontaktnķ informace)

(1) (2) (3)
D
Popis voleb
(1) Model
  Vyberte 3 pro basic analog output module - 3000 series, 4 pro enhanced analog output module - 4000 series
(2) Output Range
  Vyberte 12 pro ±1 V, 13 pro 5 V, 14 pro ±10 V, 16 pro 0 to 1V, 17 pro 0 to 5V, 18 pro 0 to 10V, 25 pro 0 to 20mA
(3) Communication Interface
  Vyberte 1 pro RS-232C, 2 pro RS-485
 Poznįmka: ne všechny kombinace jsou sprįvné, ovģųte si sprįvnost čķsla modelu.

 Literatura
   Stįhnout kompletnķ specifikace produktu ve formįtu PDF
 Manuįly
   Stįhnout  COMPUTER OUTPUT MODULES Operators Manual
 Software
   Stįhnout D1000/D2000/D3000/D4000/D5000 setup software (DOS)
 Souvķsejķcķ odkazy
   D1000: OMEGABUS® Digital Transmitters
   D5000: OMEGABUS Series Four Channel Sensor to Computer Interface Modules
   D6000 Series: Modbus® Serial Interface Modules
   D8000_Series: USB Interface Modules