DP25B-E and DP25B-S
Strain and Process Meter with Large, Selectable Color Display

DP25B-E and DP25B-S : Strain and Process Meter with Large, Selectable Color Display
Kliknìte zde pro vìtší obrázek.

8,820.00  Kč *

  Big Bright LED Display
  Scaling in Wide Range of Engineering Units
  Built-In Excitation
  Analog Output Optional
  Dual Relays Optional
  Tare Button
  Peak Memory

The OMEGA DP25B series Digital Panel Meters feature the biggest brightest display of any 1/8 DIN panel meter. The user can select the display color: RED ,AMBER, or GREEN.
PANEL METERS with Relays and Analog Output
The popular DP25B series are accurate, economical, and easy to program. The DP25B series feature a big bright four digit display plus optional dual 5 amp Form C (SPDT) relays and a choice of isolated or non-isolated analog output. The scalable 0-10 Vdc, 0-20mA, or 4-20 mA analog output can be used as a retransmission of the display value or as a proportional control output as required. The microprocessor based DP25B series includes instruments for Thermocouple, RTD, Dual/Differential Thermocouple, Dual/Differential RTD, Process (DC voltage and current) Strain Gage, pH, ORP.

The DP25B process meter accepts a wide variety of DC voltage and current inputs to cover any typical process application. Standard features include easy front panel scaling to virtually any engineering units, selectable excitation of four voltages to work with most transducers and transmitters, front panel and remote tare function for weighing applications, and a hardware lockout to prevent unauthorized changes in setup. Four full digits and simplified scaling via the front-panel pushbuttons make it easy to set the display to read in any engineering units.

Input Ranges: 0-100 mV, ±50 mV, 0-10 V, ±5 V, 0-20 mA, 4-20 mA
Isolation: Dielectric strength to 2500V transient per 3mm spacing based on EN 61010 for 260 Vrms or DC working voltage
NMR: 60 dB
CMR: 120 dB
Input Protection: Voltage Input = 120 Vrms max; Current Input = 100 mA max
Input Impedance: 100 Meg ohms for 100 mV or ±50 mV input range; 1 Meg ohm for 10 V or ±5 V input range; 5 ohms for 20 mA current input range
Display: 4-digit, LED 9-segment, 21 mm (0.83"), (Red, Green, Amber)
Analog-to-digital technique: Dual slope
Internal resolution: 15 bits
Read rate: 3/sec
Polarity: Automatic
Max error process: ±0.03% of reading, ± 1 count
Span tempco: 50 ppm/°C
Step response: 1 sec
Warm-up to rated accuracy: 30 min
Load Regulation: 1.1%
Line Regulation: 0.02% per Vac
Analog output (optional): 0-10 V, 4-20 mA or 0-20 mA; may be assigned to a display range or to setpoint #1, when used as a proportional control output
Operating temperature: 0 to 50°C (32 to 122°F)
Storage temperature: -40 to 85°C (-40 to 184°F)
Relative humidity: 90% at 40°C (104°F) (non-condensing)
Panel cutout: 1/8 DIN, 45 x 92 mm (1.78" x 3.62")
Weight: 575 g (1.27 lb)
AC Power Unit:
Power: 115 Vac or 230 Vac ±10%; 50-60 Hz, 11.0 watts max.
Excitation: 24 V @ 25 mA or 12 V @ 50 mA or 10 V @ 120 mA or 5 V @ 60 mA
DC Power Unit:
Power: 10-32 Vdc; 8.0 watts max.
Excitation: 24 V @ 25 mA or 12 V, 10 V, 5 V @ 35 mA (For Low/Medium Brightness), For High Brightness use external excitation to power sensors

 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 DP25B-E    8,820.00 Kč   Basic Process Meter
 DP25B-E-230    8,820.00 Kč   Process Meter, 230 Vac
 DP25B-E-230-A    11,410.00 Kč   Process Meter, 230 Vac with Analog output
 DP25B-E-230-AR    13,710.00 Kč   Process Meter, 230 Vdc with Analog and Relay output
 DP25B-E-DC10/32    11,880.00 Kč   Process Meter / Controller, 10-32 Vdc
 DP25B-S    8,820.00 Kč   Basic Strain Meter
 DP25B-S-230    8,820.00 Kč   Strain Meter, 230 Vac
 DP25B-S-230-A    11,410.00 Kč   Strain Meter, 230 Vac with Analog output
 DP25B-S-230-AR    13,710.00 Kč   Strain Meter, 230 Vdc with Analog and Relay output
 DP25B-S-DC10/32    11,880.00 Kč   Strain Meter / Controller, 10-32 Vdc
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: Power Options are not field installable. All units come complete with a operator’s manual.

(1) (2) (3)
Popis voleb
(1) TYPE
  Vyberte E pro Process voltage and current inputs, S pro Strain gage bridge or process inputs
(2) Power Options
  Vyberte pro 115 Vac power leave blank, -230 pro 230 Vac power, -DC10/32 pro 10 to 32 Vdc power, -DC26/56 pro 26 to 56 Vdc power
(3) Output Options
  Vyberte pro no options leave blank, -A pro scaleable analog output, -R pro dual alarm relays, -AR pro analog and relay options, -AI-R pro isolated analog outputs and relay options
 Poznámka: ne všechny kombinace jsou správné, ovìøte si správnost èísla modelu.

   Stáhnout kompletní specifikace produktu ve formátu PDF
   Stáhnout  DP25-E and DP25B-E - 1/8 DIN Process Panel Meter
   Stáhnout  DP25-E and DP25B-E - Quick Start Manual for DP25-E Process Meter