DRSL-SP1
Isolated DIN Rail Repeater/Splitter for Current Signals

DRSL-SP1 : Isolated DIN Rail Repeater/Splitter for Current Signals
Kliknìte zde pro vìtší obrázek.

4,860.00  Kč *
     DRSL-SP1

  Isolation and Conversion of Current Signals
  Splitter Function: 1 Current Input—2 Current Outputs
  Slimline Housing—Only 6 mm (0.24") Wide
  Fast Response Time <7 ms
  High Accuracy, <0.05% of Span
  Easy-to-Use—No Setup Needed

The DRSL-SP1 isolated repeater/ splitter provides a competitive choice in terms of both price and technology for galvanic isolation of current signals to SCADA systems or PLC equipment. Two current outputs are provided which mirror the single current input.

The DRSL-SP1 can be used for signal conversion of a standard process current signal into two individual analog signals. The unit offers 4-port isolation, provides surge suppression and protects control systems from transients and noise. The DRSL-SP1 also eliminates ground loops and can be used for measuring floating signals. Low power consumption facilitates DIN rail mounting without the need for any air gap. Measurement ranges are factory calibrated. The unit operates over a wide temperature range from -25 to 70°C (-13 to 158°F).

SPECIFICATIONS
CURRENT INPUT
    Measurement Range: 0 to 20.5 mA
    Functional Range: 0 to 23 mA
    Input Voltage Drop: <1.5 Vdc

CURRENT OUTPUT
Number of Outputs: 2
    Signal Range: 0 to 20.5 mA (span)
    Load: 23 mA/300 Ω maximum
    Load Stability: ≤0.01% of span/100 Ω (span = 0 to 20 mA)
    Current Limit: ≤28 mA

GENERAL
Supply Voltage (via Power Rail or Connectors): 16.8 to 31.2 Vdc
Power Consumption: 0.8 W max
Internal Consumption: 0.4 W typical/0.65 W max
Isolation: Input/output 1/ output 2/supply
Isolation Voltage (Test): 2.5 kVac
Isolation Voltage (Working): 300 Vac
Signal/Noise Ratio: > 60 dB
Response Time (0 to 90%, 100 to 10%): <7 ms
Accuracy: < ±0.05% of span
Temperature Coefficient: <±0.01% of span/°C
EMC Immunity Influence: < ±0.5% of span
Extended EMC Immunity
    NAMUR NE 21, A Criterion, Burst:
<±1% of span

ENVIRONMENTAL
Operating Temperature: -25 to 70°C (-13 to 158°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Calibration Temperature: 20 to 28°C (68 to 82°F)
Relative Humidity: 0 to 95% RH non-condensing
Protection Degree: IP20
Installation Area: Pollution degree 2 and measurement/overvoltage category II

MECHANICAL
Dimensions: 113 H x 6.1 W x 115 mm D (4.4 x 0.24 x 4.5")
Weight: 70 g (0.15 lb) approx
DIN Rail Type: DIN EN 60715 - 35 mm
Wire Size: 0.13 x 2.5 mm2/AWG 26 to 12 stranded wire
Screw Terminal Torque: 0.5 Nm


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 DRSL-SP1    4,860.00 Kč   Isolated repeater/splitter for current signals
 DRSL-PWR-RAIL    3,090.00 Kč   Power rail (with cover and two end covers, one right hand and one left hand), 1 m (3.3') length
 DRSL-PCU    2,220.00 Kč   Power connector unit, 24 Vdc/2.5 A output to power rail
 DRSL-MOD-STOP    140.00 Kč   Module stop (screwed onto power rail to support and hold mounted devices)
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Pøíklad objednávky: (1) DRSL-MOD-STOP Module stop (screwed onto power rail to support and hold mounted devices), (1) DRSL-PCU Power connector unit, 24 Vdc/2.5 A output to power rail, (1) DRSL-PWR-RAIL Power rail (with cover and two end covers, one right hand and one left hand), 1 m (3.3') length, (1) DRSL-SP1 Isolated repeater/splitter for current signals = 10,310.00 Kč

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Manuály
   Stáhnout  Installation Guide for Signal Conditioners
   Stáhnout  DIN Rail Isolators and Signal Conditioners
 Souvísející odkazy
   DRSL-DC1: Isolated DIN Rail Repeater
   DRSL-DC2: Isolated DIN Rail Signal Conditioner
   DRSL-DC3: Isolated DIN Rail Signal Conditioner
   DRSL-DC4: Bipolar Isolated DIN Rail Signal Conditioner for Process Signals
   DRSL-SP2: Isolated DIN Rail Signal Conditioner/Splitter for Process Signals
   DRSL-SP3: Bipolar Isolated DIN Rail Signal Conditioner/Splitter for Process Signals
   DRSL-LPI_Series: DIN Rail Input Loop-Powered Isolators
   DRSL-LPO_Series: DIN Rail 2-Wire Transmitter Isolators
   DRSL-TC_Series: Thermocouple Input DIN Rail Signal Conditioners
   DRSL-RTD_Series: RTD Input DIN Rail Signal Conditioners
   DRSL-RTD-LP: RTD Input Non-Isolated DIN Rail Loop-Powered Signal Conditioner
   DRSL-TEMP: Isolated DIN Rail Loop-Powered Temperature Signal Conditioner
   DRSL-U: Isolated Universal Input DIN Rail Signal Conditioner