DRSP-I Series
DC Current Signal Splitters

DRSP-I Series : DC Current Signal Splitters
Kliknìte zde pro vìtší obrázek.

14,550.00  Kč *
     DRSP-I

  One 4 to 20 mA Input to Two 4 to 20 mA Outputs with Full Isolation
  Zero and Span Adjustments for Each Output
  Full 1200 V Input/Output/ Power Isolation
  Input/Output Loop Status LEDs
  Output Test Button for Each Channel
  Built-In Loop Power Supplies for Sink/Source I/O
  Split, Convert, Boost, and Rescale Process Signals
  Split Process Signals for Control and Validation
  Interface a Process Signal with Multiple Panel Meters, PLCs, Recorders, Data Acquisition, DCS, and SCADA Systems

The DRSP-I Series DC current signal splitters accept one 4 to 20 mA current input and provide two optically isolated 4 to 20 mA current outputs that are linearly related to the 4 to 20 mA current input. This provides an economical solution when one signal must be sent to two different devices. Typical applications include isolation, output splitting, output device separation and redundancy (i.e. to prevent failure of the entire loop if one device fails), or a combination of these. The input signal is filtered, amplified, split, and then passed through an opto-coupler to the output stages. Full 4-way isolation (input, output 1, output 2, power) make this module useful for ground loop elimination, common mode signal rejection,and noise pickup reduction.

Specifications
Input
Input Range: 4 to 20 mA
Input Impedance: 50 Ω typical
Input Loop Power Supply: 15 Vdc ±10%, regulated, 25 mA; May be selectively wired for sinking or sourcing mA input
Loop Status LEDs: Variable brightness LEDs indicate I/O loop level and status; One for input, one for each output
Output
Output Range:
(Output 1 and Output 2): 4 to 20 mA; 20V compliance, 1000 Ω at 20 mA
Output Linearity: Better than ±0.1% of span
Output Zero and Span: Multi-turn zero and span potentiometers for each output channel to compensate for load and lead variations; ±15% of span adjustment range typical
Output Loop Power Supplies: One for each output channel; 20 Vdc nominal, regulated, 25 mA may be selectively wired for sinking or sourcing mA output
Output Ripple and Noise: Less than 10 mVRMS
Output Functional Test: Front buttons set each output to test level when pressed; Each test level potentiometer adjustable 0 to 100% of span
General
Response Time: 70 milliseconds typical
Common Mode Rejection: 120 dB minimum
Isolation (Full 4-Way Isolation): Input 1, output 1, output 2, power; 1200 VRMS minimum
Ambient Temperature Range: -10 to 60°C (14 to 140°F)
Stability: Better than ±0.04% of span per °C
Power:
    DRSP-I: 60 to 265 Vac, 50/60 Hz or 85 to 300 Vdc, 6 W maximum
    DRSP-I-DC: 9 to 30 Vdc or 10 to 32 Vac 50/60 Hz, 6 W maximum
Housing: IP40, mounts to standard 35 mm (1.37") DIN rail
Connectors: Eight 4-terminal removable connectors; 14 AWG maximum wire size
Dimensions: 45 W x 117 H x 122 mm D (1.78 x 4.62 x 4.81"); height includes connectors


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 DRSP-I    14,550.00 Kč   DC current signal splitter, 60 to 265 Vac, 50/60 Hz or 85 to 300 Vdc power
 DRSP-I-DC    14,550.00 Kč   DC current signal splitter, 9 to 30 Vdc or 10 to 32 Vac, 50/60 Hz power
 RAIL-35-1    310.00 Kč   35 mm DIN rail, 1 m (3.3') length
 RAIL-35-2    590.00 Kč   35 mm DIN rail, 2 m (6.6') length
 iDRN-PS-1000    4,590.00 Kč   Power supply (switching), 95 to 240 Vac input, 24 Vdc output at 850 mA
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: Comes complete with operator’s manual.
 Pøíklad objednávky: (1) DRSP-I DC current signal splitter, 60 to 265 Vac, 50/60 Hz or 85 to 300 Vdc power = 14,550.00 Kč

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Manuály
   Stáhnout  DRSP - DC-DC Isolator-splitter
 Souvísející odkazy
   DMD4380 Series: DC to DC Isolated Signal Conditioner
   DMD4059 Series: Bridge/Strain Gage Signal Conditioner