DRTB-Rail Series
DIN Rails, Standard and Pre-Cut Lengths

DRTB-Rail Series : DIN Rails, Standard and Pre-Cut Lengths
Kliknģte zde pro vģtšķ obrįzek.

150.00  Kč *
     DRTB-RAIL-3575-1

  35x7.5 mm & 35x15 mm in 1 Meter & 2 Meter Lengths
  Steel with Electrolytic Zinc Plating
  Pre-Cut Lengths for Standard Sub-Panel Widths
  Stand-Off Brackets: 45° Angle and Straight
  Comply with DIN 50045, 50022 and 50035 Standards

DRTB-RAIL-3575 with Omega’s
DRTB Thermocouple Terminal
Blocks with Audit Capabilities
The DRTB-Rails Series DIN Rails enhances design capabilities, saves space and reduces labor. DIN rails have been accepted throughout the world, allowing the designer to mount a wide variety on control components, devices and terminal blocks, etc. on the same rail. DRTB-Rails are perforated steel with electrolytic zinc plating and available in 35x7.5mm and 35x15 mm sizes. These DIN rails comply with DIN 50045, 50022 and 50035 standards.

Pre-Cut DIN Rails
Pre-cut DIN rails are offered in widths to match enclosure sizes. An enclosure, 12H x 10” W, would use DRTB-RAIL-10. This DIN rail measures 8.75" wide, just short of the 8.88" wide sub-panel.

Support Brackets
Support brackets elevate DIN rails away from the sub-panel to facilitate component wiring access. Angled brackets tilt the DIN rails by 45° to improve visibility. Straight brackets are available in three heights for optimum positioning of the rails.


Dimensions mm(in)
        
      Brackets include screws
      & lock washers
    


 Čķslo modelu  Cena (bez DPH)  Popis  Ks
 DRTB-RAIL-3575-1    150.00 Kč   35 x 7.5 mm (1.4 x 0.3") slotted DIN rail, 1 m (3.3')
 DRTB-RAIL-3575-1-20PK    2,040.00 Kč   35 x 7.5 mm (1.4 x 0.3") slotted DIN rail, 1 m (3.3'), 20-pack
 DRTB-RAIL-3575    210.00 Kč   35 x 7.5 mm (1.4 x 0.3") slotted DIN rail, 2 m (6.6')
 DRTB-RAIL-3575-20PK    3,690.00 Kč   35 x 7.5 mm (1.4 x 0.3") slotted DIN rail, 2 m (6.6'), 20-pack
 DRTB-RAIL-3515-1    180.00 Kč   35 x 15 mm (1.4 x 0.6") slotted DIN rail, 1 m (3.3')
 DRTB-RAIL-3515-1-10PK    1,530.00 Kč   35 x 15 mm (1.4 x 0.6") slotted DIN rail, 1 m (3.3'), 10-pack
 DRTB-RAIL-3515    360.00 Kč   35 x 15 mm (1.4 x 0.6") slotted DIN rail, 2 m (6.6')
 DRTB-RAIL-3515-10PK    2,970.00 Kč   35 x 15 mm (1.4 x 0.6") slotted DIN rail, 2 m (6.6'), 10-pack
 DRTB-RAIL-4    150.00 Kč   Pre-cut DIN rail for 4" wide enclosure, actual width 2.75"
 DRTB-RAIL-6    150.00 Kč   Pre-cut DIN rail for 6" wide enclosure, actual width 4.75"
 DRTB-RAIL-8    150.00 Kč   Pre-cut DIN rail for 8" wide enclosure, actual width 6.75"
 DRTB-RAIL-10    150.00 Kč   Pre-cut DIN rail for 10" wide enclosure, actual width 8.75"
 DRTB-RAIL-12    180.00 Kč   Pre-cut DIN rail for 12" wide enclosure, actual width 10.75"
 DRTB-RAIL-14/16    180.00 Kč   Pre-cut DIN rail for 14 or 16" wide enclosure, actual width 12.75"
 DRTB-RAIL-20    180.00 Kč   Pre-cut DIN rail for 20" wide enclosure, actual width 16.75"
 DRTB-RAIL-24    180.00 Kč   Pre-cut DIN rail for 24" wide enclosure, actual width 20.75"
 DRTB-RAIL-SBKT-45D-6PK    210.00 Kč   45° Angle bracket, 6 per pack
 DRTB-RAIL-SBKT-1-6pk    180.00 Kč   1" H bracket, 6 per pack
 DRTB-RAIL-SBKT-2-6pk    270.00 Kč   2" H bracket, 6 per pack
 DRTB-RAIL-SBKT-3-6pk    330.00 Kč   3" H bracket, 6 per pack
 T-BLK-EB-10PK    180.00 Kč   Therminal Block end stops, 1-screw, pkg of 10
 XBAES35C-50PK    1,470.00 Kč   Terminal block end stops, 1-screw, pkg of 50
 XBAES35T-50PK    1,110.00 Kč   Terminal block end stops, 3-screw, pkg of 50
 XBAES35N-50PK    900.00 Kč   Terminal block end stops, snap-on, pkg of 50
Obsah košķku Vyprįzdnit košķk Objednat
 * využijte možnost konzultovat ceny pųķmo s našimi prodejci  (tel: 596 311 899 - prodejnķ oddģlenķ, e-mail: viz. kontaktnķ informace)
= 0.00 Kč

= 0.00 Kč

 Pųķklad objednįvky: (3) DRTB-RAIL-10 3 pieces of pre-cut 35x7.5mm DIN rail for 10, (1) DRTB-RAIL-3575 35x7.5mm DIN rail, 2 m long, (1) DRTB-RAIL-3575-1-20PK 35x7.5mm DIN Rail, 1 m long, 20 per pack = 2,700.00 Kč

 Literatura
   Stįhnout kompletnķ specifikace produktu ve formįtu PDF
 Souvķsejķcķ odkazy
   DIN Rail Terminal Blocks, Feed Through and Ground Terminals: AVK Series Feed Through DIN Rail Mounting Terminal Blocks, 600V, 20 to 175 Amp, 26 to 6-2/0 AWG
   ASK T-Block Series Terminal Blocks: Disconnect and Fuse Screw Connection DIN Rail Mounting Terminal Blocks
   DRTB Series Thermocouple Terminal Blocks: Thermocouple Terminal Blocks with Audit Capable Female Connector
   DSUB: DIN Rail Interface Modules
   ASK Fuse Holder Series: DIN Rail Fuse Holders
   XRU1D Series: STANDARD TERMINAL BLOCK RELAYS
   D2PR Series: General Purpose Compact "Ice Cube" Plug-In Relays
   OM-AMU Series Fiberglass Enclosures: Non-Metallic Fiberglass Electrical Enclosures with Solid or Clear Polycarbonate Covers, NEMA 3R and NEMA 4X for Indoor or Outdoor Use - 6x6 to 20x16"
   SCE-ELJ Series Enviroline® Junction Electrical Enclosures: NEMA Type 4 Junction Outdoor Electrical Enclosures, Sizes from 6x4 to 20x20.