F2020 Series
RTD Elements: OMEGAFILM® Flat Profile Thin Film Platinum with Ceramic Base and Glass Coating

F2020 Series : RTD Elements: OMEGAFILM® Flat Profile Thin Film Platinum with Ceramic Base and Glass Coating
Kliknìte zde pro vìtší obrázek.
  Flat, Small Profile Thin Film RTD Element
  Specification DIN EN 60751 (According to IEC 60751)
  Temperature Range -50 to 500°C (-58 to 932°F) Depending on Accuracy Class (See Table Below)
  Temperature Coefficient α = 0.00385Ω/Ω/°C Nominal
  100, 500 and 1000 Ohm Configurations
  Class A, B and 1/3 B (Also Known as Class AA) Tolerances
  Long Term Stability: Max. Ro Drift Not Greater Than the Class Tolerance After 1000 Hours in Air at Maximum Temperature Specified for Class.
  Vibration Resistance at Least 40 g Acceleration at 10 to 2000 Hz
  Shock Resistance at 100 g Acceleration with 8ms Half Sine Wave
  Insulation Resistance >10Mohms at 20°C: >1Mohms at 500°C
  Self Heating Does Not Exceed 25% of the Tolerance Value When Powered at the Maximum Specified Operating Current (1 milliamp for 100Ω, 0.7milliamp for 500Ω and 0.3 milliamp for 1000Ω Elements)
  Response Time Water Current (v=0.4 m/s)
t0.5 = 0.2 s; t0.9 = 0.4 s Air Stream
(v = 1 m/s) t0.5 = 3.0 s; t0.9 = 9.0 s

  Platinum Clad Nickel Wire Leads 10 L x 0.2 mm D (0.39 x 0.008")

The F2020 thin film RTD element is a 2.0mm x 2.0mm size. OMEGAFILM platinum thin film RTD elements are manufactured using materials and processes similar to those employed in the manufacture of integrated circuits. This results in a rugged, reliable sensing element that can be produced in a wide range of sizes, resistances, and accuracies to meet even the most demanding of applications.

OMEGAFILM RTDs conform to the internationally accepted requirements of IEC60751, which defines the resistance vs. temperature characteristics of the sensors, their base resistance at 0°C (32°F), and their accuracy (see below). RTDs conforming to IEC751 have a temperature coefficient of resistance (also known as Alpha) of 0.00385Ohms/Ohms/°C between 0 and 100°C.

As a result of conforming to an internationally recognized standard such as IEC751, OMEGAFILM RTD elements can be used as-is worldwide with a multitude of controllers and instruments designed to function within these requirements. Elements are referred to as pt100, pt500 or pt1000 Ohm configurations

ClassTolerance (°C)Tolerance of
resistance at 0°C (Ω)
Temperature
Range
1/3B (AA) ±(0.1 + 0.0017ItI) ±0.04Ω 0 to 150°C
A ±(0.15 + 0.002ItI)±0.06Ω -30 to 300°C
B ±(0.3 + 0.005ItI) ±0.12Ω -50 to 500°C
OMEGAFILM RTDs are available in flat, round, and specialty shapes for maximum flexibility. They are also available in resistances at 0°C that include 100, 200, 500, and 1000 ohms, depending on the element style (the resistances available for each style will be shown on their individual pages).


Note on Assembling Omega "F" Series RTD Elements to Extension Wires: These RTD elements are made with platinum coated nickel lead wires. Since platinum does not easily wet with most soft solders, we advise that they be spot welded or silver soldered to extension wires when required.


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 F2010-100-A-100    12,000.00 Kč   Packages of 100 - THIN FILM 100 OHM CLASS A, 2.0 x 9.5 x 0.8
 F2010-100-B-100    10,500.00 Kč   Packages of 100 - THIN FILM 100 OHM CLASS B, 2.0 x 9.5 x 0.8,
 F2010-1000-A-100    12,000.00 Kč   Package of 100 - THIN FILM 1000 OHM CLASS A, 2.0 x 9.5 x 0.8
 F2010-1000-B-100    10,500.00 Kč   Sold in Package of 100 - THIN FILM 1000 OHM CLASS B, 2.0 x 9.5 x 0.8
 F2020-100-1/3B-100    6,780.00 Kč   Packages of 100 - THIN FILM 100 OHM CLASS 1/3B, 2.0 x 2.0 x 0.8
 F2020-100-B-100    3,030.00 Kč   Packages of 100 - THIN FILM 100 OHM CLASS B, 2.0 x 2.0 x 0.8
 F2020-1000-B-100    3,030.00 Kč   Sold in Package of 100 - THIN FILM 1000 OHM CLASS B, 2.0 x 2.0 x 0.8
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Souvísející odkazy
   EXGG, EXTT and EXPP Series: RTD and Thermistor Extension Wire
   MTP Series: 3-Prong Mini flat pin Connector for Thermocouple, RTD and 3-Wire Thermistor
   View All RTDs: View our large selection, including general purpose, quick disconnect, indutrial, extruder, surface measurement, and more!
   316-RTD: RTD MI Cable OMEGACLAD® RTD Mineral Insulated Cable, 2, 3, 4 or 6 Conductor MIC with MgO
   General RTD Specifications: RTD Tech Reference