FDT21W Series
Wall Mount Ultrasonic Flowmeter

FDT21W Series : Wall Mount Ultrasonic Flowmeter
Kliknìte zde pro vìtší obrázek.

64,260.00  Kč *

  Accuracy 1%
  Repeatability 0.2%
  Positive, Negative and Net Totalizer
  2-Line LCD Display
  Clamp On Transducers
  RS485 Output

FDT-21W ultrasonic flowmeter is designed to measure the fluid velocity of liquid in a full/closed pipe. It is a measurement system which is both easy to install and use. The FDT-21W operates according to the difference in the transit time of flight measured, and determines the flow velocity by measuring the travel time of a pulse from one transducer to the next. Flow in the same direction takes less time to travel to the second transducer than does flow in the opposite direction. Electroacoustic transducers receive and emit brief ultrasonic pulses through the liquid of the pipe. Transducers are vertically placed at both sides of the measured pipe. Sensors are placed on the pipe and fastened by means of a clamp. The display will quickly show the flow velocity. The FDT-21W can be used for metallic, plastic and rubber tubes.

Accuracy: ±1% of reading >(0.2 m/s) 0.6 ft/s
Repeatability: 0.2%
Linearity: 0.5%
Response Time: 0 to 999 seconds (user configured)
Velocity: (±0.01 to 30 m/s) ±0.03 to 105 ft/s bi-directional
Temperature Range:
    Standard: 0 to 160°C (32 to 320°F)
Pipe Size: DN 20 to 100 mm (0.75 to 4") standard [up to DN 6000 mm (236") with optional transducers]
Transducer Frequency: 1 MHz
Rate Units (User Configured): Meter, feet, cubic meter, cubic feet, USA gallon, oil barrel, USA liquid barrel, imperial liquid barrel, million USA gallons
Totalizer: 7-digit totals for positive, negative and net flow
Liquid Types: Most liquids including clean water, sea water, waste water, chemical liquids, oil, crude oil, alcohol, beer, and more
Suspension Concentration: ≤20,000 ppm (may contain very small amounts of air bubbles)
Pipe Material: All metals, most plastics and fiberglass
Security: Programmable lock-out code
Display: 2 x 16 english letters
Power: 85 to 264 Vac
Communications: RS485 (baud rate from 75 to 115,200 bps)
Transducer Cable Length: 5 m (15')
Data Logger: Built-in, stores over 2000 lines of data
Totalizer/Calibration: 7-digit press-to-go for calibration
Housing: ABS plastic with aluminum alloy protective carrying case
Case: NEMA 4 (IP65)
Dimensions: 29 H x 20 W x 9 cm D (11.5 x 8 x 3.5")
Weight: 514 g (1.2 lb)

 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 FDT-21W    64,260.00 Kč   Wall mount transit-time ultrasonic flowmeter (Includes S2H transducer)
 FDT-21W-S2H    10,080.00 Kč   Replacement small pipe transducer
 FDT-21W-M2H    10,080.00 Kč   Medium pipe transducer
 FDT-21W-L2H    11,970.00 Kč   Large pipe transducer
 FDT-21-CLAMP1    510.00 Kč   (Replacement) Transducer pipe clamp set for up to DN100 (4")
 FDT-21-CLAMP2    950.00 Kč   Transducer pipe clamp set for up to DN200 (8")
 FDT-21-CLAMP3    1,390.00 Kč   Transducer pipe clamp set for up to DN300 (12")
 FDT-21-CLAMP4    1,770.00 Kč   Transducer pipe clamp set for up to DN400 (16")
 FDT-21-CLAMP5    2,020.00 Kč   Transducer pipe clamp set for up to DN500 (20")
 FDT-21-CLAMP6    2,520.00 Kč   Transducer pipe clamp set for up to DN600 (24")
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: Comes complete with standard size high temperature transducers (S2H), M2 memory storage card, transducer cable (2 @5m), transducer clamps (DN100) , allen(hex) wrench, 10 terminal spade lugs, shrink tubing and operator’s manual.

   Stáhnout kompletní specifikace produktu ve formátu PDF
   Stáhnout  Ultrasonic Flowmeter Wall Mountable