FLR D Series
Flow Meter with Analog Outputs

FLR D Series : Flow Meter with Analog Outputs
Kliknìte zde pro vìtší obrázek.

25,050.00  Kč *
     FLR7130D

  2% FS Accuracy
  No Straight Pipe Run Required
  Mounts in Any Position
  4 to 20 mA, 0 to 5 Vdc; and 0 to 10 Vdc Outputs Standard
  Digital Flow Rate and Total Flow Indicator
  In-Field Compensation for:
– Specific Gravity of All Fluids
– Viscosity of Petroleum-Based Fluids
– Specific Gravity, Pressure, and Temperature of Pneumatic Applications

Rugged In-Line Flow Sensors
Available in 1/2", 3/4", and 1-1/4" sizes with anodized aluminum, brass and/or stainless steel flow cartridges. Comes with 4.5 m (15') of stripped end integral cable. In the field, integral cable can be extended up to 300 m (1000') with shielded copper cable. Units are securely protected in a sturdy cast aluminum enclosure, and are easy to install and mount in any position, vertical or horizontal. Capable of monitoring fluids to 150 GPM or pneumatic lines to 1000 SCFM.

SPECIFICATIONS
Temperature Range: -29 to 116°C (-20 to 240°F)
Maximum Pressure: 3500 psig (liquids); 1000 psig (gases)
Power Requirement:
   0 to 5 Vdc Output: 10 to 30 Vdc @ 0.75W max
   0 to 10 Vdc Output: 12 to 30 Vdc @ 0.75W max
   4 to 20 mA Output: Loop-powered, 30 Vdc max
Power Consumption: 25 mA max
Circuit Protection: Reverse polarity and current limit
Repeatability: ±0.5%
Non-linearity: ±0.05%
Isolation: Inherently isolated from the piping system
Display: Fixed or toggle modes of operation for rate and totalizer display. 8-digit, 0.70" high numeric display for rate and total 8-digit 0.35" high alphanumeric display for units and setup.
Response Time: 1.0 sec
Temperature Drift: 0.05% of span per °C max
Analog Outputs: 4 to 20 mA into 1kΩ max 0 to 5 Vdc into 10 kΩ min 0 to 10 Vdc into 10 kΩ min
User Connections: 15-foot pig-tail (standard)
Transmission Distance: 4 to 20 mA limited by cable resistance 0 to 5 Vdc 300 m (1000') maximum 0 to 10 Vdc 300 m (1000') maximum
ENCLOSURE
Material: Anodized and epoxy powder-coated aluminum with polycarbonate lens
Seals: Silicone gasket between enclosure and lens/cover. FKM O-rings between enclosure and flow meter body.
Connection: 4-pin connection (standard)
Fasteners: T303 SS
Rating: NEMA 12 & 13 (IP52/54)
Materials: 2024 - T351 anodized aluminum body, piston and cone C360 Brass body, piston and cone
PETROLEUM (OIL) COMMON PARTS
Spider Plate: T316 SS
Spring: T302 SS
Fasteners: T303 SS
Pressure Seals: FKM
Lens: Polycarbonate
Retaining Ring: SAE 1070/1090 carbon steel
Retaining Spring: SAE 1070/1090 carbon steel
Internal Magnet: PPS/ceramic
Enclosure Seal: Silicone gasket
WATER-BASES, WATER, AIR COMMON PARTS
Spider Plate: T316 SS
Spring: T302 SS
Fasteners: T303 SS
Pressure Seals: FKM
Lens: Polycarbonate
Retaining Ring: T316 SS
Retaining Spring: ST316 SS
Internal Magnet: PPS/ceramic
Enclosure Seal: Silicone gasket


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 FLR6102D    23,040.00 Kč   0.2 to 2.0 GPM, 1/2 NPT
 FLR6105D    23,040.00 Kč   0.5 to 5.0 GPM, 1/2 NPT
 FLR6115D    23,040.00 Kč   1 to 15 GPM, 1/2 NPT
 FLR7120D    25,050.00 Kč   2 to 20 GPM, 3/4 NPT
 FLR7130D    25,050.00 Kč   3 to 30 GPM, 3/4 NPT
 FLR8140D    25,050.00 Kč   4 to 40 GPM, 1 NPT
 FLR8150D    25,050.00 Kč   5 to 50 GPM, 1 NPT
 FLR9175D    42,810.00 Kč   10 to 75 GPM, 1 ¼ NPT
 FLR9110D    42,810.00 Kč   10 to 100 GPM, 1 ¼ NPT
 FLR9115D    42,810.00 Kč   10 to 150 GPM, 1 ¼ NPT
 FLR6302D    24,720.00 Kč   0.2 to 2.0 GPM, 1/2 NPT
 FLR6305D    24,720.00 Kč   0.5 to 5.0 GPM, 1/2 NPT
 FLR6315D    24,720.00 Kč   1 to 15 GPM, 1/2 NPT
 FLR7320D    28,590.00 Kč   2 to 20 GPM, 3/4 NPT
 FLR7330D    28,590.00 Kč   3 to 30 GPM, 3/4 NPT
 FLR8340D    31,530.00 Kč   4 to 40 GPM, 1 NPT
 FLR8350D    31,530.00 Kč   5 to 50 GPM, 1 NPT
 FLR9375D    57,960.00 Kč   10 to 75 GPM, 1 ¼ NPT
 FLR9310D    57,960.00 Kč   10 to 100 GPM, 1 ¼ NPT
 FLR9315D    57,960.00 Kč   10 to 150 GPM, 1 ¼ NPT
 FLR6725D    24,720.00 Kč   2 to 25 SCFM, 100 psi, 1/2 NPT
 FLR6750D    23,040.00 Kč   5 to 50 SCFM, 100 psi, 1/2 NPT
 FLR7710D    25,050.00 Kč   10 to 100 SCFM, 100 psi, 3/4 NPT
 FLR7715D    25,050.00 Kč   15 to 150 SCFM, 100 psi, 3/4 NPT
 FLR8725D    25,050.00 Kč   25 to 250 SCFM, 100 psi, 1 NPT
 FLR9740D    42,810.00 Kč   25 to 400 SCFM, 100 psi, 1 ¼ NPT
 FLR9760D    42,810.00 Kč   50 to 600 SCFM, 100 psi, 1 ¼ NPT
 FLR9710D    42,810.00 Kč   100 to 1000 SCFM, 100 psi, 1 ¼ NPT
 FLR-D CABLE    1,560.00 Kč   Replacement 4.6 m (15') cable with 4-pin connector
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: Comes complete with 4-pin connector, 15 feet of cable, and operator’s manual.

For a 5-point NIST traceable certificate, add suffix "-NIST" to model number, add $350 to price.


 Pøíklad objednávky: (1) FLR6105D Flow transmitter, 0.5 - 5.0 GPM for oil, with analog output = 23,040.00 Kč

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Manuály
   Stáhnout  FLR5000, 6000, 7000, 8000, and 9000 Series - Flow Transmitter