FLSC-28, FLSC-34, FLSC-35 and FLSC-51B
Integral Signal Conditioners for Frequency, Voltage, or Current Output - Discontinued

FLSC-28, FLSC-34, FLSC-35 and FLSC-51B : Integral Signal Conditioners for Frequency, Voltage, or Current Output<span class=discontinue-title> - Discontinued</span>
Kliknìte zde pro vìtší obrázek.
  Up to 0.05% Accuracy
  Choose from Six Output Types
  CMOS/TTL Compatible
  Adjustable Low Level Signal Filter for Noise Rejection
  Explosion-Resistant Heads
  For FTB-100 and FTB-200 Turbine Flowmeters
  Integral Signal Conditioners Available for 4 to 20 mA, 0-5 V, and Factored Pulse Outputs

The FLSC-28 Series has been discontinued. Please see the FLSC-C3-LIQ Series as a possible alternative or contact our Flow Engineering Department.

Signal ConditionersCompatible Meters
Model No.
FLSC-34,
FLSC-28, FLSC-35B, FLSC-51
DPF50, DPF60,
DPF300, DPi8
See related links below.
OMEGA® high accuracy integral signal conditioners are designed for direct mounting onto OMEGA FTB-100 and 200 Series turbine meters. The input circuitry of the signal conditioners has been designed to receive and condition low level turbine meter signals while rejecting unwanted noise and spurious signals. A signal threshold control is provided which allows the user to set the input sensitivity above the ambient noise level, thereby eliminating any false signal on the output. Signal conditioners are available that can provide 4 to 20 mA, 0 to 5V, and scaled frequency pulse outputs that run on unregulated power supplies. Other units which run off 115 Vac provide both an unscaled pulse output and a 0 to 5V or 4 to 20 mA output. A zero and a span potentiometer allow for simple field adjustment of the analog outputs from the signal conditioners.

SPECIFICATIONS
Accuracy: See "To Order" box
Temperature Range: 0 to 70°C (32 to 158°F)
Pulse Output: TTL/CMOS; open collector for FLSC-51B
Input Frequency: 10-1000 Hz, 28 mV P-P; 1000-2500 Hz, 70 mV P-P. Can be used with any OMEGA Turbine Meter
Maximum Input: 120V RMS
Electrical Connections: Screw terminals
Maximum Lead Length: 305 m (1000') of 24 gage copper wire for pulse or mA; 30 m (100') for 0 to 5V output.
Weight: 2.3 kg (5 lb)

Model No. Output Power Accuracy
FLSC-34 4 to 20 mA and unscaled pulse 115 Vac, 50/60 Hz ±0.1% FS
FLSC-28 0 to 5 Vdc 10 to 40 Vdc @ 10 mA ±0.5% FS
FLSC-35B 0 to 5 Vdc and unscaled pulse 115 Vac, 50/60 Hz ±0.1% FS
FLSC-51B scaled squarewave pulse (50 ms duration) 8 to 35 Vdc @ 10 mA ±1% FS


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 FLSC-51B    17,580.00 Kč   Scaled square wave pulse output with 50 ms pulse duration for use with electromechanical totalizers
 FTB-101    35,370.00 Kč   1/2" NPT 0.35 to 3.5 GPM
 FTB-102    35,370.00 Kč   1/2" NPT 0.75 to 7.5 GPM
 FTB-106    39,120.00 Kč   1" NPT 4 to 60 GPM
 FTB-202    35,370.00 Kč   37° Flare Fitting, 3/4-16 UNF-3A, 0.75 to 7.5 GPM
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: Signal conditioners are installed/scaled at no charge when purchased with turbine meter.

When ordering the Turbine and Signal Conditioner to be scaled and installed as a system, add the cost of the turbine and the signal conditioner together for system cost.

NOTE: The use of explosion-proof heads does not imply that complete assembly is either explosion-proof or intrinsically safe. It is the user’s responsibility to determine the suitability of materials for a given installation.



 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Manuály
   Stáhnout  FLSC - FLSC Signal Conditioners Manual
 Souvísející odkazy
   FTB-100: Turbine Flowmeters with Economical Ball Bearing Design
   FTB-200: Economical Ball Bearing Turbine Flowmeters With 37° Flare Fittings
   DPI Series - Models DPi32, DPi16, DPi8: i-Series 1/32, 1/16, 1/8 DIN Programmable Temperature/Process Meters with RS232 & RS485 Communications
   DPF300 Series: Economical 4-20 mA Loop-Powered Indicator
   DPF50: 3 1/2 Digit Mini-size Process Meter
   DPF60 Series: DPF60 Series Ratemeters, Totalizers and Batch Controllers for Voltage and Current Inputs