FP-5100 and FP-5300
Paddlewheel Flow Sensors

FP-5100 and FP-5300 : Paddlewheel Flow Sensors
Kliknìte zde pro vìtší obrázek.

9,480.00  Kč *
     FP-5300

  Accurate to ±0.2 fps
  Repeatability at ±0.1 fps
  Simple and Accurate Flow Measurement

Streamline your flow measurement operation with the FP-5100 Series flow sensor. Using this compact flow sensor, a matched sensor installation fitting, an OMEGA® flow meter or controller, and ordinary handtools, you can assemble a complete flow monitoring or controlling system in minutes. Accurate to ±0.2 fps, with repeatability at ±0.1 fps, this insertion sensor operates on a simple electromechanical principle, proven in thousands of liquid flow applications worldwide. It all adds up to precision, dependability, and convenience– basic advantages that are quickly surpassing its in-line competition.

Convert your maintenance hours into minutes with the FP-5300. Should a sensor, rotor, or O-ring need to be replaced, it takes only seconds. Reduce your system downtime substantially with a stand-alone FP-5300 sensor, or simply add a Wet Tap Assembly and eliminate downtime completely. Combined with the FP-5300 during initial installation, the Wet Tap allows sensor removal without system shut-down. Optional local or remote capability lets you place your meter up to 200 feet away without signal amplification, and you can install the FP-5300 in pipe sizes ranging from 1/2 inch to 36 inches without a lot of additional cost, because the price of the FP-5300 increases only slightly for larger pipe sizes.

Available in a choice of chemically resistant, non-contaminating housing materials, the FP-5300 stands up to the harshest environments. The glass-filled polypropylene housing version is lightweight but strong, which makes it ideal for handling a wide range of liquids, including corrosive fluids in chemical processing. For processes involving acids and solvents, the PVDF (polyvinylidene fluoride) housing version is a tough fluorocarbon that is highly resistant to more severe fluids.

The sensor works on a simple but precise electromechanical principle based on measuring the rate and volume of flow in your pipe. Four permanent magnets, imbedded in the rotor blades, spin past a coil in the sensor body. As the fluid flow causes the rotor to move, a sine wave signal is produced, directly proportional to the flowrate. The patented “open cell” feature of the rotor ensures a linear, repeatable output, up to 20 fps, with accuracy of ±0.2 fps. The result is minimal head loss and no cavitation.

Designed to allow optional conduit installation, the FP-5300 easily lets you comply with local codes requiring conduit protection. For instance, pry off the plug on top of the sensor: underneath, you’ll find a 1/2 FNPT thread. Using an optional conduit adaptor fitting kit, you can connect your conduit FPM-5000-SCAK conduit adaptor kit), and an optional instrument back-cover kit will provide everything you need for quick conduit connection to a meter or controller. Additionally, you can adapt to both rigid and flexible liquid-tight conduits, protecting your system hookup from harsh elements and mechanical damage.

Flow Range
Pipe
Size
½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8" 10" 12"
Range
(gpm)
1
to
19
1.7
to
34
2.7
to
54
4.7
to
94
6.4
to
127
10.6
to
210
15
to
300
24
to
461
40
to
794
63
to
1247
91
to
1801
156
to
3119
246
to
4915
349
to
6977

SPECIFICATIONS
Accuracy: ±1% full scale
Output Signal: 1 V p-p/fps
Output Frequency: 6 Hz/fps nominal
Flow Rate Range: 1 to 20 fps
Source Impedance: 8 kΩ
Maximum Pressure:
   FP-5300 Series: 180 psig max @ 20°C (68°F)
   FP-5100 Series: 200 psig max @ 20°C (68°F)
Minimum Temperature: 0°C (32°F)
Maximum Temperature: See chart on spec sheet for complete temperature and pressure rating
Pressure Drop: Equal to 2.5 m (8') of straight pipe
Material:
   Transducer Housing: glass-filled polypropylene or PVDF
   O-Rings: FKM
   Shaft: Titanium or Hastelloy C(PVDF optional)
   Rotor: PVDF
Maximum % Solids: 1% of fluid volume, non-abrasive, nonmagnetic, <100 micron diameter and length
Standard Cable Length: 7.5 m (25')
Max Viscosity: 1 centipoise (water); up to 5 cp above 5 fps velocity


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 FP-5300    9,480.00 Kč   Titanium shaft polypropylene housing, for pipe sizes 1/2 to 4"
 FP-5301    9,780.00 Kč   Titanium shaft polypropylene housing, for pipe sizes 5 to 8"
 FP-5302    10,710.00 Kč   Titanium shaft polypropylene housing, for pipe sizes 10 or larger
 FP-5100    16,050.00 Kč   Hastelloy C shaft, PVDF housing, for pipe sizes 1/2 to 4"
 FP-5101    17,400.00 Kč   Hastelloy C shaft, PVDF housing, for pipe sizes 5 to 8"
 FP-3193    27,150.00 Kč   Titanium shaft polypropylene housing, for pipe sizes 1/2 to 4" Wet Tap Assembly
 FP-3195    29,700.00 Kč   Titanium shaft polypropylene housing, for pipe sizes 10" and up Wet Tap Assembly
 FP-5307CU    9,480.00 Kč   3/4" Copper
 FP-5310M    5,670.00 Kč   1" molded PVC
 FP-5320GI    4,140.00 Kč   2" Galvanized Iron
 FP-5340CS    4,740.00 Kč   4" Carbon Steel Weldolet
 DPF701    8,580.00 Kč   1/8 DIN Panel Meter for Rate or Totalization
 DPF75    9,030.00 Kč   1/8 DIN Panel Meter for Rate and Totalization
 FPM-5000-SCAK    1,560.00 Kč   Sensor Conduit Adapter Kit
 FMK-1546-1    650.00 Kč   Replacement titanium rotor pin
 FMK-51545-1    1,710.00 Kč   Replacement PVDF rotor and rotor pin
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: Comes complete with operator's manual.

(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)


 Pøíklad objednávky: (1) DPF701 1/8 DIN Panel Meter for Flow Rate or Totalization, (1) FP-5300 Paddlewheel sensor for 1/2 to 4,  = 18,060.00 Kč

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Manuály
   Stáhnout  FP-5100,FP-5300,FP-5600,FP-8500 - Paddlewheel Flow Sensors
   Stáhnout  FP-5100,FP-5300,FP-5600,FP-8500 - Paddlewheel Flow Sensors
 Souvísející odkazy
   FP Series Fittings: Sensor Installation Fittings
   DPF700 Series: 1/8 DIN 6-Digit Rate Meter/Totalizer
   FP-5200 and FP-3: Rugged, Reliable All-metal Sensors
   FMK and FPP Series: Paddlewheel Sensor Accessories
   FP-319: The Downtime Eliminator: Wet Tap Valve Assemblies
   DPU91_FLOW: Multi-Parameter Input Transmitter
   CL535: Frequency Calibrator with Totalizer