FSB Series
Fluidized Sand Bath Calibrators

FSB Series : Fluidized Sand Bath Calibrators
Kliknìte zde pro vìtší obrázek.

129,000.00  Kč *
     FSB-3

  Two Temperature Ranges: 122 to 662°F (50 to 350°C) 122 to 1112°F (50 to 600°C)
  Safe, Clean, Dry Heat
  Burn-Out Protection
  Stainless Steel Containers
  Inconel-Sheathed Immersion Heaters
  Built-in Pressure Switch and Overload Fuse
  Rugged, Heavy-Duty, Accurate
  Spill Flanges Standard on all Models

When fluidized solids are heated, heat is distributed quickly and evenly throughout the bath and transferred rapidly to objects submerged in the bath. The bath temperature can be adjusted easily to the point at which you wish to calibrate or run a test.

Fluidized baths for laboratories and instrument shops provide safe, rapid heat transfer and accurate temperature control, enabling you to efficiently and safely calibrate and maintain temperature sensitive instruments.

The principle of fluidization occurs when a gas—usually low pressure air or nitrogen—flows upward through a partially-filled chamber or retort of dry, inert particles of aluminum oxide. The gas flows at a low velocity, which sets the particles in motion, separates them, then suspends them to a stable level to give the particles the appearance of turbulence quite similar to the state of boiling liquid.

Besides circulating and flowing like a liquid, fluidization solids exhibit excellent heat transfer characteristics.

Model No.Temperature
Range
Working Volume
dia. x depth
Overall Volume
dia. x height
Power
FSB-150 to 350°C
(122 to 662°F)
178 x 89 mm
(7.0 x 3.5")
241 x 305 mm
(9.5 x 12")
117 Vac
(One 750 Watt Heater)
FSB-250 to 350°C
(122 to 662°F)
229 x 114 mm
(9.0 x 4.5")
292 x 470 mm
(11.5 x 18.5")
117 or 240 Vac
(Two 1 kW Heaters)
FSB-350 to 600°C
(122 to 1112°F)
178 x 139 mm
(7.0 x 5.5")
330 x 457 mm
(13 x 18")
117 or 240 Vac
(Two 750 Watt Heater)
FSB-450 to 600°C
(122 to 1112°F)
229 x 381 mm
(9.0 x 15.0")
381 x 660 mm
(15 x 26")
240 Vac
(Four 1 kW Heaters)


Fig. 1 - Pressure Regulator, Specify PRG200-25 and Fig. 2 - Air Compressor, Specify FSB-C-804
Pressure Regulator
Reduces the pressure of air from air line to suit the fluidized bath. The Regulator is supplied with a pressure gauge reading from 0 to 30 lb/in2 and a built-in air filter. Specify PRG200-25.

Air Compressor
For those who do not have a convenient air line, this oil-less unit with self-lubricating carbon vanes provides the proper air supply to fluidize the laboratory units. Specify FSB-C-804.

NOTE: HEAVY WEIGHT - OVERWEIGHT SHIPPING CHARGES APPLY FOR THIS PRODUCT. IF ORDERED ON-LINE INTERNET SALES WILL CONTACT YOU AFTER ORDER PLACEMENT UNLESS YOU OPT TO CHARGE FREIGHT TO YOUR CARRIER ACCOUNT.


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 FSB-3    129,000.00 Kč   Fluidized Sand Bath Termperature Probe Calibrator, 122 to 1112°F (50 to 600°C) Temperature Range, 240Vac Power
 FSB-3-240V    129,000.00 Kč   Fluidized Sand Bath, 240V
 FSB-4    186,000.00 Kč   Fluidized Sand Bath Termperature Probe Calibrator, 122 to 1112°F (50 to 600°C) Temperature Range, 240Vac Power
 FSB-A-20   Kontaktujte prodejce  Replacement Sand - 20 pound Aluminum Oxide
 FSB-A-34   Kontaktujte prodejce  Replacement Sand - 34 pound Aluminum Oxide
 FSB-F-784-A    3,150.00 Kč   Air Filter
 FSB-C-804    22,950.00 Kč   Air Compressor
 PRG200-25    4,290.00 Kč   Pressure Regulator
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Manuály
   Stáhnout  FSB series - Fluidized Sand Baths