FTS Series
Finned Tubular Air Heating Elements

FTS Series : Finned Tubular Air Heating Elements
Kliknìte zde pro vìtší obrázek.

2,580.00  Kč *
     FTS-015315/120V

  Maximum Sheath Temp. 455°C (850°F)
  Fins for Fast Heat Transfer
  725 to 5000 Watts
  120 and 240 Vac Applications
  APPLICATIONS
• Drying
• Heat Treating
• Annealing
• Load Banks
• Curing

Finned tubular air heating elements are constructed like basic tubular elements with the addition of continuous spiral fins, 4-5 per inch permanently furnace brazed to the sheath.Fins greatly increase surface area and permit faster hear transfer to air, resulting in lower surface element temperatures.

Refer to the following table for element dimensions

Model No. Watts Volts Dimensions cm (in)
A B F H
0.80 cm (0.315") Sheath Diameter (D) Approximately 60 W/sq. in.
FTS-015315/120V50012038 (15)26.7 (101/2)2.14 (.844)20.2 (81/4)
FTS-024315/120V102512061 (24)49.5 (191/2)2.14 (.844)42.3 (171/4)
FTS-036315/120V175012091 (36)80 (311/2)2.14 (.844)71.1 (291/4)
FTS-048315/240V2450240122 (48)110 (431/2)2.14 (.844)101.1 (411/4)
FTS-063315/240V3500240160 (63)149 (581/2)2.14 (.844)137.8 (561/4)
1.2 cm (0.475) Sheath Diameter (D) Approximately 9.3 W/cm2 (60 W/in2)
FTS-015475/120V72512038 (15)26.7 (101/2)2.90 (1.14)22 (8 5/8)
FTS-024475/120V145012061 (24)49.5 (191/2)2.90 (1.14)45 (17 5/8)
FTS-036475/240V245024091 (36)80 (311/2)2.90 (1.14)75 (29 5/8)
FTS-048475/240V3450240122 (48)110 (431/2)2.90 (1.14)106 (41 5/8)
FTS-063475/240V5000240160 (63)149 (581/2)2.90 (1.14)144 (56 5/8)


1.2 cm (0.475") Diameter Sheath and Bending Information

Finned Tubular Bending - Dimensions cm (inches)
Element
Dia. cm (in)
Factory
Min C
Bending
Min R
Customer
Min. C
Bending
Min. R
Figure 1*
.800 (.315)5.87 (2 5/16)2.78 (1 3/32)5.87 (2 5/16)2.94 (1 5/32)
1.20 (.475)8.57 (3 3/8)4.29 (1 11/16)8.57 (3 3/8)4.29 (1 11/16)
Figure 2**
.800 (.315)17.6 (6 15/16)2.62 (1 1/32)24.8 (9 3/4)2.62 (1 1/32)
1.20 (.475)25.7 (10 1/8)4.29 (1 11/16)34.4 (13 9/16)4.29 (1 11/16)
* The overall length of A will be slightly less than one-half the original sheath length, depending on bending radius. ** The overall length of A will be approximately 3.8 cm (11/2") longer than one-fourth of the original sheath length depending on the bending radius R. Note: the start of any bends should be no closer than 8.7 cm (37/16") for 1.2 cm (0.475") dia. or 9.2 cm (35/8") for 0.8 cm (0.315") elements, from the end of the sheath to prevent the heating element/cold pin junction from being located in the bend.



 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 FTS-015246/120V    1,680.00 Kč   finned air heater
 FTS-024315/120V    4,170.00 Kč   finned air heater
 FTS-015315/120V    2,580.00 Kč   finned air heater
 FTS-036315/120V    5,370.00 Kč   finned air heater
 FTS-048315/240V    7,050.00 Kč   finned air heater
 FTS-015475/120V    2,910.00 Kč   finned air heater
 FTS-024475/120V    4,440.00 Kč   finned air heater
 FTS-036475/240V    7,350.00 Kč   finned air heater
 FTS-048475/240V    8,430.00 Kč   finned air heater
 FTS-063475/240V    12,300.00 Kč   finned air heater
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: Other heaters with monel sheath [max. temp. 565°C (1050°F)] are available. Contact OMEGALUX® at 1-800-826-6342.
 Pøíklad objednávky: (1) FTS-024315/120V A 55.8 cm (24") 120 Vac finned air heater = 4,170.00 Kč

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF