IP510, EP510, IP511, EP511 Series
Heavy Duty Electropneumatic Converters
I/P and E/P Models

IP510, EP510, IP511, EP511 Series : Heavy Duty Electropneumatic Converters<br>I/P and E/P Models
Kliknėte zde pro vėtší obrázek.

20,850.00  Kč *
     IP511-X27

  Hazardous Locations and Intrinsically Safe Ratings
  NEMA 4X (IP65)
  0.1% Accuracy Typical
  Closed Loop Pressure Feedback Control
  Built-in Volume Booster Provides Flow Up to 12 SCFM
  Easy Access to Zero and Span
  Damping Pot Prevents Overshoot and Hunting
  Low Air Consumption
  Mount at Any Angle
  Compact and Lightweight
  Virtually No Sensitivity to Supply Pressure Changes
  Removable Orifice for Easy Maintenance
  Buna-N Seals Standard, Fluorocarbon Optional

The IP510/EP510 Series are a patented family of electro-pneumatic instruments that are used to reduce a pneumatic supply pressure to a regulated output pressure which is directly proportional to a two-wire current or three-wire voltage input. This design incorporates closed loop sensing of the output pressure to achieve excellent accuracy and vibration stability. They also feature a unique damping circuit which can be adjusted to prevent overshoot and actuator hunting. Model selection includes General purpose NEMA 1, and Water-tight/Corrosion Resistant NEMA 4X (IP65). All models carry Hazardous Locations and intrinsically safe ratings.

SPECIFICATIONS
Accuracy:
   Typical: ±0.1% of output span
   Max: ±0.25% of output span
Hysteresis:
   Typical: ±0.01% of output span
   Max: ±0.10% of output span
Deadband: No effect
Repeatability:
   Typical: ±0.01% of output span
   Max: ±0.10% of output span
Ambient Temperature Effect Zero:
   Typical: ±0.004% of nominal span/°F
   Max: ±0.022% of nominal span/°F
Ambient Temperature Effect Span:
   Typical: 0.013% of calibrated span/°F
   Max: 0.022% of calibrated span/°F
Temperature Effect: ≤0.02%/°F, zero and span effects combined
Operating Temperature Range:
   Buna-N Elastomers: -29 to 71°C (-20 to 160°F)
   Fluorocarbon Elastomers: -18 to 71°C (0 to 160°F)
Storage Temperature Range:
   Buna-N Elastomers: -40 to 93°C (-40 to 200°F)
   Fluorocarbon Elastomers: -26 to 93°C (-15 to 200°F)
Vibration Effects: Less than 0.5% of span per 1 g, 5 to 2000 Hz, 3 g max, 3 axes
Mounting Position Effect: Not measurable
Loop Load, I/P Transducer:
   Less than 10 Vdc drop at 20 mA
   Less than 12 Vdc drop at 50 mA
Supply Voltage, E/P Transducer:
   Intrinsically Safe/Non-Incendive: 9 to 28 Vdc, less than 20 mA
   General Purpose: 9 to 40 Vdc, less than 20 mA
Supply Voltage Effect: No effect
Signal Impedance E/P Transducer: 6000 Ω minimum
RFI/EMI Effect NEMA 4X (IP66): Less than 0.25% of span change in output 10 V/meter, 20 to 1000 MHz (Reference SAMA PML 33.1 to 1978, 2 to abc)
Supply Pressure Sensitivity: No effect
Effective Air Consumption: 0.07 SCFM (2 LPM) maximum
Supply Pressure: 100 psig (6.9 bar) maximum*
* For models with zero output capability maximum supply pressure = 40 psi (2.8 bar) above maximum output, except for 0 to 100 and 0 to 120 psi models that have a maximum supply pressure of 130 psi (9 bar) and 140 psi (9.7 bar) respectively.
Dimensions
   IP510: 102 H x 48 W x 89 mm D (4.01 x 1.88 x 3.5")
   IP511: 144 H x 112 mm W (5.66 x 4.36")
Port Sizes:
   Pneumatic: ¼ FNPT
   Electrical: ½ FNPT


 Číslo modelu  Cena (bez DPH)  Popis  Ks
 IP510-X15    15,300.00 Kč   Current to pressure converter with 3-15 psi output, 4-20 mA input and NEMA-1 enclosure
 IP510-X27    15,300.00 Kč   Current to pressure converter with 3-27 psi output, 4-20 mA input and NEMA-1 enclosure
 IP510-X30    15,300.00 Kč   Current to pressure converter with 6-30 psi output, 4-20 mA input and NEMA-1 enclosure
 IP510-060    15,900.00 Kč   Current to pressure converter with 0-60 psi output, 4-20 mA input and NEMA-1 enclosure
 IP510-0120    15,900.00 Kč   Current to pressure converter with 0-120 psi output, 4-20 mA input and NEMA-1 enclosure
 EP510-X15    15,300.00 Kč   Voltage to pressure converter with 3-15 psi output, 1-5 volt input and NEMA-1 enclosure
 EP510-X27    15,300.00 Kč   Voltage to pressure converter with 3-27 psi output, 1-5 volt input and NEMA-1 enclosure
 EP510-X30    15,300.00 Kč   Voltage to pressure converter with 6-30 psi output, 1-5 volt input and NEMA-1 enclosure
 EP510-060    15,900.00 Kč   Voltage to pressure converter with 0-60 psi output, 1-5 volt input and NEMA-1 enclosure
 EP510-0120    15,900.00 Kč   Voltage to pressure converter with 0-120 psi output, 1-5 volt input and NEMA-1 enclosure
 IP511-X15    20,850.00 Kč   Current to pressure converter with 3-15 psi output, 4-20 mA input and NEMA-4X enclosure
 IP511-X27    20,850.00 Kč   Current to pressure converter with 3-27 psi output, 4-20 mA input and NEMA-4X enclosure
 IP511-X30    20,850.00 Kč   Current to pressure converter with 6-30 psi output, 4-20 mA input and NEMA-4X enclosure
 IP511-060    21,750.00 Kč   Current to pressure converter with 0-60 psi output, 4-20 mA input and NEMA-4X enclosure
 IP511-0120    21,750.00 Kč   Current to pressure converter with 0-120 psi output, 4-20 mA input and NEMA-4X enclosure
 EP511-X15    20,850.00 Kč   Voltage to pressure converter with 3-15 psi output, 1-5 volt input and NEMA-4X enclosure
 EP511-X27    20,850.00 Kč   Voltage to pressure converter with 3-27 psi output, 1-5 volt input and NEMA-4X enclosure
 EP511-X30    20,850.00 Kč   Voltage to pressure converter with 6-30 psi output, 1-5 volt input and NEMA-4X enclosure
 EP511-060    21,750.00 Kč   Voltage to pressure converter with 0-60 psi output, 1-5 volt input and NEMA-4X enclosure
 EP511-0120    21,750.00 Kč   Voltage to pressure converter with 0-120 psi output, 1-5 volt input and NEMA-4X enclosure
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddėlení, e-mail: viz. kontaktní informace)
 Pøíklad objednávky: (1) IP511-X15 current to pressure converter with 4-20 mA input, 3-15 psi output and NEMA-4X enclosure = 20,850.00 Kč

(1) (2) (3)
-
Popis voleb
(1) Enclosure Type
  Vyberte IP510 pro NEMA 1 (IP00) Enclosure with 4 to 20 mA input, IP511 pro NEMA 4X (IP66) Enclosure with 4 to 20 mA input, EP510 pro NEMA 1 (IP00) Enclosure with 1 to 5 Vdc input, EP511 pro NEMA 4X (IP66) Enclosure with 1 to 5 Vdc input
(2) Specify Output Range
  Vyberte X15 pro 3 to 15 psig, X27 pro 3 to 27 psig, X30 pro 6 to 30 psig, 060 pro 0 to 60 psig, 0120 pro 0 to 120 psig
(3) Seal Material
  Vyberte prázdné pole pro Buna-N seals (standard), -F pro Fluorocarbon seals
 Poznámka: ne všechny kombinace jsou správné, ovėøte si správnost čísla modelu.

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Manuály
   Stáhnout  IP510 and IP511 Series - I/P and E/P Converters