KE Series
High Temperature Constant Wattage Heating Cable

KE Series : High Temperature Constant Wattage Heating Cable
Kliknìte zde pro vìtší obrázek.

180.00  Kč *
     KE4-120

  Continuous Exposure Rating up to 500°F
  Low Watt Density
  Parallel Resistance Heater
  Cut-to-Length at the Job Site
  Constant Watt Density
  All Common Voltages Available
  Moisture and Chemical Resistance
  Continuous Electrical Ground
  Designed for freeze protection and process temperature maintenance.

The KE Cable heating element is tension wrapped and covered with two layers of nonflammable Polyimide Film applied in reverse directions, then heat fused for moisture protection. A stainless steel and tinned copper sheath is then added for additional protection and electrical ground return path. The sheath is enclosed in a minimum 20 mil PFA abrasion and chemical resistant extruded jacket.

OMEGALUX® KE Cable is a low Watt density electrical resistance heater. It is designed for freeze protection, viscosity and high temperature process control in Class 1, Groups B, C, and D, Division 2 Classified Areas as well as in corrosive environments. KE is used in asphalt plants, oil refineries, mines, chemical and petrochemical processing areas, other locations where corrosive atmospheres can occur. KE is equally suitable for applications in severe arctic cold.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.

Max. Circuit Length**-KE Series
Power 120V 208V 240V 277V 480V
4 Watts/ft349"606"699"806"1398"
8 Watts/ft247"428"494"570"988"
12 Watts/ft202"350"403"466"807"


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 KE4-120    180.00 Kč   high temperature, constant wattage cable, 4 W/FT, 120 V
 KE4-240    380.00 Kč   high temperature, constant wattage cable, 4 W/FT, 240 V
 KE8-240    180.00 Kč   high temperature, constant wattage cable, 8 W/FT, 240 V
 KE12-120    180.00 Kč   high temperature, constant wattage cable, 12 W/FT, 120 V
 KE12-240    180.00 Kč   high temperature, constant wattage cable, 12 W/FT, 240 V
 KE-UC-KIT    1,170.00 Kč   Termination Kit (for KE Series)
 KE-KC-KIT    1,170.00 Kč   Termination Kit (for KE Series)
 FE-UC-KIT    1,140.00 Kč   Termination Kit (for FE Series)
 FE-KC-KIT    1,230.00 Kč   Termination Kit (for FE Series)
 SK-KIT    630.00 Kč   Splice Kit
 FE-SK-KIT    840.00 Kč   Splice Kit (for FE Series)
 RTV-SS    270.00 Kč   Silicone Sealant
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka:
*Price per foot. When ordering specify desired length in feet. 25 foot minimum.
**Maximum Circuit Lengths include end-to-end voltage variation of 10%. Longer runs may be used. Lengths are based on cable operating temperatures of 300°F. To complete your system the following accessories are recommended: (1) Termination kits for KE cable (see page B-30 for specifications), (2) control options - see Section P for a complete selection of controllers and thermostats.

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF