LC8250
Compact Through-Hole Bolt Load Cells, 2.50 Inch O.D.

LC8250 : Compact Through-Hole Bolt Load Cells, 2.50 Inch O.D.
Kliknìte zde pro vìtší obrázek.

15,450.00  Kč *
     LC8250-250-3K

  Low Profile
  5 Point NIST Traceable Calibration with
59 kOhm Shunt Cal Data

  All Stainless Steel Construction
  Rugged Industrial Design

The LC8250 Series Donut Load Cell is an economical solution to applications requiring a through-hole design. With its extremely low profile and compact design, this load cell is ideal for applications such as clamping forces, bolt loading forces and other compressive loads. This series, with its all stainless steel construction and environmental protection, features proven reliability in tough industrial applications.

SPECIFICATIONS
Output: 2 mV/V nominal
Input: 10 Vdc (15V max)
Linearity: ± 0.5% FSO
Repeatability: ± 0.1% FSO
Zero Balance: ±2.0% FSO
Operating Temp Range: -54 to 121°C (-65 to 250°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects:
   Zero: ±0.009% FSO/°C
   Span: ±0.018% rdg/°C
Safe Overload: 150% of capacity
Ultimate Overload: 300% of capacity
Deflection: 0.076 mm (0.003") nominal
Input Resistance: 360 Ω minimum
Output Resistance: 350 ±5 Ω
Construction: 17-4 PH stainless steel
Electrical: 1.5 m (5') 4-conductor shielded cable


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 LC8250-750-1K    15,450.00 Kč   Thru hole load cell, 2.5'' OD, 0.750'' ID, 0-1,000 lb capacity
 LC8250-1.25-1K    15,450.00 Kč   Thru hole load cell, 2.5'' OD, 0.125'' ID, 0-1,000 lb capacity
 LC8250-750-3K    15,450.00 Kč   Thru hole load cell, 2.5'' OD, 0.750'' ID, 0-3,000 lb capacity
 LC8250-750-5K    15,450.00 Kč   Thru hole load cell, 2.5'' OD, 0.750'' ID, 0-5,000 lb capacity
 LC8250-1.00-7.5K    15,450.00 Kč   Thru hole load cell, 2.5'' OD, 1.00'' ID, 0-7,500 lb capacity
 LC8250-1.00-10K    15,450.00 Kč   Thru hole load cell, 2.5'' OD, 1.00'' ID, 0-10,000 lb capacity
 LC8250-500-15K    20,850.00 Kč   Thru hole load cell, 2.5'' OD, 0.500'' ID, 0-15,000 lb capacity
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: All LC8250 load cells include a NIST traceable calibration certificate.
 Pøíklad objednávky: (1) LC8250-750-2K is a 2,000 lb capacity load cell with 2.50'' O.D. and 0.750'' I.D. = 15,450.00 Kč

(1) (2)
LC8250- -
Popis voleb
(1) Inside Diameter
  Vyberte 250 pro 0.250 inch ID, 375 pro 0.375 inch ID, 500 pro 0.500 inch ID, 625 pro 0.625 inch ID, 750 pro 0.750 inch ID, 875 pro 0.875 inch ID, 938 pro 0.938 inch ID, 1.00 pro 1.00 inch ID, 1.13 pro 1.13 inch ID, 1.25 pro 1.25 inch ID, 1.38 pro 1.38 inch ID, 1.50 pro 1.50 inch ID
(2) Load Range
  Vyberte 1K pro 0-1000 lb range, 2K pro 0-2000 lb range, 3K pro 0-3000 lb range, 5K pro 0-5000 lb range, 7.5K pro 0-7500 lb range, 10K pro 0-10000 lb range, 15K pro 0-15000 lb range, 20K pro 0-20000 lb range, 30K pro 0-30000 lb range, 40K pro 0-40000 lb range, 50K pro 0-50000 lb range, 75K pro 0-75000 lb range, 100K pro 0-100000 lb range
 Poznámka: ne všechny kombinace jsou správné, ovìøte si správnost èísla modelu.

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Souvísející odkazy
   DP25B Series: 1/8 DIN Process Meter & Controller
   DP41-S: High Performance Strain Gage Meter, High Resolution 6-Digit Display
   DMD4059 Series: Bridge/Strain Gage Signal Conditioner