LC901
Bolt Sensors with Mounting Washers

LC901 : Bolt Sensors with Mounting Washers
Kliknìte zde pro vìtší obrázek.

9,480.00  Kč *
     LC901-3/8-10K

  All Stainless Steel Construction
  Mounting Washers Included
  NIST Calibration Certificate

OMEGA’s LC900 Series bolt force sensor is a compression load cell designed to measure the clamping force of a bolt. With excellent long term stability and all stainless steel construction, the LC900 Series delivers high reliability in severe industrial environments. This unit is designed to operate by mounting on a flat surface between two mounting washers (included).

The LC901 is also available in metric configurations, with ranges from 0-10,000 to 0-500,000 N. Please see the LCM901 for complete details, or contact our Pressure department for more information.

SPECIFICATIONS
Excitation: 5 Vdc (10V max)
Output: 2 mV/V nominal
Accuracy: ±3.5% FSO (linearity, hysteresis and repeatability combined)
Zero Balance: ±4% FSO
Operating Temp Range: -54 to 93°C (-65 to 200°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects:
   Zero: ±0.018% FSO/°C
   Span: ±0.036% rdg/°C
Safe Overload: 130% of capacity
Ultimate Overload: 150% of capacity
Bridge Resistance: 120 Ω nominal
Construction: Stainless steel
Electrical Connection: 1.2 m (4') insulated shielded cable


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 LC901-1/4-2K    9,480.00 Kč   1/4" Bolt sensor with 2,000 lb capacity & stripped end cable
 LC901-1/4-5K    9,480.00 Kč   1/4" Bolt sensor with 5,000 lb capacity & stripped end cable
 LC901-3/8-10K    9,480.00 Kč   3/8" Bolt sensor with 10,000 lb capacity & stripped end cable
 LC901-1/2-30K    10,110.00 Kč   1/2" Bolt sensor with 30,000 lb capacity & stripped end cable
 LC901-5/8-50K    11,160.00 Kč   5/8" Bolt sensor with 50,000 lb capacity & stripped end cable
 LC901-3/4-65K    12,750.00 Kč   3/4" Bolt sensor with 65,000 lb capacity & stripped end cable
 LC901-1.5-100K    13,800.00 Kč   1 1/2" Bolt sensor with 100,000 lb capacity & stripped end cable
 LC911-1/2-30K    11,010.00 Kč   1/2" Bolt sensor with 30,000 lb capacity & connector installed on cable
 LC911-5/8-50K    11,940.00 Kč   5/8" Bolt sensor with 50,000 lb capacity & connector installed on cable
 LC911-3/4-65K    13,500.00 Kč   3/4" Bolt sensor with 65,000 lb capacity & connector installed on cable
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: 1) LC911 mating connectors, part number PT06F10-6S sold separately. 2) All LC900 Series include a NIST traceable calibration certificate.
 Pøíklad objednávky: (1) LC911-1/2-30K 30,000 lb sensor for 1/2" bolt with connector on cable, (1) PT06F10-6S mating connector sold separately = 11,850.00 Kč

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Souvísející odkazy
   DP25B Series: 1/8 DIN Process Meter & Controller
   DP41-S: High Performance Strain Gage Meter, High Resolution 6-Digit Display
   DMD4059 Series: Bridge/Strain Gage Signal Conditioner