LCM900 Series
Bolt Sensors with Mounting Washers, Metric, 0-500 N to 0-25,000 Newtons

LCM900 Series : Bolt Sensors with Mounting Washers, Metric, 0-500 N to 0-25,000 Newtons
Kliknìte zde pro vìtší obrázek.

9,300.00  Kč *
     LCM901-6-10KN

  All Stainless Steel Construction
  Mounting Washers Included
  NIST Calibration Certificate

OMEGA’s LCM900 Series bolt force sensor is a compression load cell designed to measure the clamping force of a bolt. With excellent long term stability and all stainless steel construction, the LCM900 Series delivers high reliability in severe industrial environments. This unit is designed to operate by mounting on a flat surface between two mounting washers (included).

The LCM901 is also available in standard configurations, with 0-2,000 to 0-100,000 lb ranges. Please see the LC901 for complete details, or contact our Pressure department for more information..


SPECIFICATIONS
Excitation: 5 Vdc (10V max)
Output: 2 mV/V nominal
Accuracy: ±3.5% FSO (linearity, hysteresis and repeatability combined)
Zero Balance: ±4% FSO
Operating Temp Range: -54 to 93°C (-65 to 200°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects:
   Zero: ±0.018% FSO/°C
   Span: ±0.036% rdg/°C
Safe Overload: 130% of capacity
Ultimate Overload: 150% of capacity
Bridge Resistance: 120 Ω nominal
Construction: Stainless steel
Electrical Connection: 1.2 m (4') insulated shielded cable


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 LCM901-6-10KN    9,300.00 Kč   10 kN capacity bolt sensor for 6 mm bolt with 1.2 meter cable with stripped ends
 LCM901-6-20KN    9,300.00 Kč   20 kN capacity bolt sensor for 6 mm bolt with 1.2 meter cable with stripped ends
 LCM901-10-50KN    9,300.00 Kč   50 kN capacity bolt sensor for 10 mm bolt with 1.2 meter cable with stripped ends
 LCM901-13-130KN    9,900.00 Kč   130 kN capacity bolt sensor for 13 mm bolt with 1.2 meter cable with stripped ends
 LCM901-16-200KN    10,950.00 Kč   200 kN capacity bolt sensor for 16 mm bolt with 1.2 meter cable with stripped ends
 LCM901-19-300KN    12,450.00 Kč   300 kN capacity bolt sensor for 19 mm bolt with 1.2 meter cable with stripped ends
 LCM901-38-500KN    13,500.00 Kč   500 kN capacity bolt sensor for 38 mm bolt with 1.2 meter cable with stripped ends
 LCM911-13-130KN    10,800.00 Kč   130 kN capacity bolt sensor for 13 mm bolt with PT06A10-6S connector installed on 1.2 meter cable
 LCM911-16-200KN    11,700.00 Kč   200 kN capacity bolt sensor for 16 mm bolt with PT06A10-6S connector installed on 1.2 meter cable
 LCM911-19-300KN    13,200.00 Kč   300 kN capacity bolt sensor for 19 mm bolt with PT06A10-6S connector installed on 1.2 meter cable
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Pøíklad objednávky: (1) LCM911-13-130KN is a 130 kN capacity bolt sensor for a 13 mm bolt with a connector installed on the cable = 10,800.00 Kč

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Souvísející odkazy
   DP25B Series: 1/8 DIN Process Meter & Controller
   DP41: 1/8 DIN High Performance Temperature, Process and Strain Meter
   DMD4059 Series: Bridge/Strain Gage Signal Conditioner