LDM422 Series
Fully Isolated Limited Distance Modem, RS-232/422 Converter

LDM422 Series : Fully Isolated Limited Distance Modem, RS-232/422 Converter
Kliknìte zde pro vìtší obrázek.

7,980.00  Kč *
     LDM422-S

  Complete Isolation with Optical Couplers and Power DC-to-DC Converter
  Industrial Surge Protection Devices
  Six LED Diagnostic Indicators
  DC to 19,200 Baud at 6000 Feet (1800M), 9600 Baud at 3 Miles (5KM)
  Request-to-Send, Clear-to- Send Handshake
  Tri-State Outputs for Multidrop Applications
  Selection of Connectors
  Wide Operation Temperature Range
  Solderless Screw Terminal Field Connections

The LDM422 is a compact RS-232 to RS-422 converter which features a complete electrical isolation barrier and heavy duty electrical surge protectors. These devices feature a rugged aluminum enclosure small enough to mount on the back panel of typical computer equipment, saving valuable desk and floor space. Isolation is provided by optical couplers and a DC-to-DC converter. The RS-232 connection is through male or female EIA 25-pin connectors. The RS422 connections are made through convenient solderless screw terminals. The LDM422 series is designed for full duplex operation over two-wire pairs. Outputs are tri-state, allowing multidropping of up to 32 units. Hardware handshake is available over two separate wire pairs. Data rates are 75 to 19,200 baud. Six diagnostic LED indicators are provided for installation guidance and system troubleshooting. The RS-232 interface supports Request To Send, Clear To Send, Data Set Ready, Received Line Signal Detect, and Data Terminal Ready. A convenient null modem switch is provided for the data lines. The RS-422 interface supports Request To Send and Clear To Send on separate wire pairs. The LDM422 may be used to convert two sets of send and receive channels by using RTS and CTS circuits as the second data channels. Data rates are the same. The units use 12VAC from a wall-mounted transformer or ±12VDC to pins 9 (+) and 10 (–) of the RS-232 connector. The LDM422 conforms to EIA RS-232 and RS-422 specifications. Data Terminal Ready must be asserted by the host RS-232 port before the LDM422 can transmit data. When Data Terminal Ready is not asserted all outputs of the LDM422 are high impedance, allowing up to 32 LDM422 units to be multidropped on a common communications cable. See Figure on page 2 for details. Request To Send and Clear To Send are carried through the RS-422 port as two separate wire pairs. These may be used for full duplex flow control.


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 LDM422-P    7,980.00 Kč   Fully isolated limited distance modem, RS-232/422 converter, 25 pin male RS-232 connector, host-powered
 LDM422-S    7,980.00 Kč   Fully isolated limited distance modem, RS-232/422 converter, 25 pin female RS-232 connector, host-powered
 LDM422-PT    8,670.00 Kč   Fully isolated limited distance modem, RS-232/422 converter, 25 pin male RS-232 connector, transformer powered
 LDM422-ST    8,670.00 Kč   Fully isolated limited distance modem, RS-232/422 converter, 25 pin female RS-232 connector, transformer powered
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: Includes operator’s manual. Transformer powered units also include 120 Vac wall mount transformer.

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Manuály
   Stáhnout  Fully Isolated Limited Distance Modem RS232/422 Converter