pro vìtí obrázek.
||Unmanaged Switch Requires No Configuration
||Supports 10/100 Mbps Networks
||Auto Half/Full Duplex Negotiation
||Redundant Power Inputs
||Auto-Crossing Detection Supports Standard and Crossover Ethernet Cables
||UL Listed: (C), (US)
The OM-ESW-100 Series is a range of compact IEEE 802.3 layer two network switches with automatic speed, duplex and cable sensing. The series features ultra-robust construction, capable of withstanding environmental extremes for use in mission critical applications. These affordable, Class I, Division 2 switches feature redundant power inputs, hardened metal enclosures, and 16 kV port protection. Each switch is capable of auto negotiating 10/100 Mb and half/full duplex communications.
All safety related regulations, local codes and instructions that appear in the literature or on equipment must be observed to ensure personal safety and to prevent damage to either the instrument or equipment connected to it. If equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.
For OM-ESW-108: Use 60/75°C rated copper wire, (0.22 Nm) 2 inch-lbs. tightening torque for field installed connectors.
For OM-ESW104/OM-ESW105: Use 95°C rated copper wire, (0.22 Nm) 2 inch-lbs. tightening torque for field installed connectors.
See PDF for detailed dimension information.
Power: 10 to 30 Vdc
OM-ESW-104; OM-ESW-105: 215 mA maximum @ 24 Vdc
OM-ESW-108: 250 mA maximum @ 24 Vdc
LED'S: Please refer to chart on PDF
Operating Temperature Range:
-40 to 80°C (-40 to 176°F)
OM-ESW-108: -40 to 70°C (-40 to 158°F)
Storage Temperature Range: -40 to 85°C (-40 to 185°F)
Operating Humidity: 10 to 95%, non-condensing
Altitude: Up to 3000 meters
Anodized aluminum housing with stainless steel end plates
Power: Removable wire clamp screw terminal block
Wire Gage Capacity: 28 to 16 AWG
Torque: 2 in/lb (0.22 Nm)
Ethernet: RJ-45 UTP ports
Snaps onto standard DIN style top hat (T) profile mounting rail
according to EN50022 35 x 7.5 and 35 x 15.
CERTIFICATIONS AND COMPLIANCES
Part numbers OM-ESW-104, OM-ESW-105 and OM-ESW-108
Safety: Suitable for use in Class I, Division 2, Groups A, B, C and D
hazardous locations, or non-hazardous locations only
Immunity to Industrial Locations:
EN61000-6-4, EN55011 - Class A
FCC Title 47, Part 15, Subpart B - Class A
ICES-003 - Class A
EN61000-4-6 (Conducted Disturbances)
OM-ESW-104: OM-ESW-105: 0.27 kg (0.6 lbs)
OM-ESW-108: 0.31 kg (0.7 lbs)