Digital Tachometer

OMDC-DM8000 : Digital Tachometer
Kliknìte zde pro vìtší obrázek.

11,820.00  Kč *

  Four Devices in One: Tachometer, Counter, Totalizer, and Zero Speed Switch
  Selectable Alarm Relay Output
  Control Modes are Selectable Between Rate, Time, and Counter
  User Inputs Allow for Special Functions: Counter Reset, Counter Gate, and Alarm Display
  Sensor Input Voltage Range: 5 VDC to 24 VDC
  5 VDC (50 mA) Sensor Power Supply Provided
  Non-Volatile Memory for Storage of Custom Settings
  Universal AC Input Voltage from 85 to 265 Vac
  NEMA 4X Rating

The OMDC-DM8000 is an economical microprocessor-based digital tachometer system capable of measuring shaft speeds lower than 1 RPM. With an on-board microcomputer coupled with sophisticated internal software and a quartz crystal controlled reference frequency, the OMDC-DM8000 is able to maintain accuracy of ±0.04%, even if the shaft is uneven. The OMDC-DM8000 is field programmable through the easy-to-use frontpanel interface and can be configured to display any desired unit of measure. Large 13 mm (½") 4-digit LED display numbers allow viewing under the most adverse conditions.

The isolated 5 amp form C relay output can be configured for many different alarming conditions. Designed to use a variety of inputs, including the hall-effect solid state OMDC-PU-E Series pick-up, the system delivers trouble free operation at an economical cost. The OMDC-DM8000 offers the same enhanced display options and capabilities featured in our other digital control products, as well as the universal power supply and rugged european-style terminal strip.

The OMDC-DM8000 can be used in process applications for monitoring speeds and rates, or counting discrete input signals. Process applications using counting may be batching, filling, mixing, punching, cutting, drilling, diverting, or alarming. While process applications using speed or rate monitoring may be conveyors, conveyor ovens, material flow, rotational rpm, and testing.

Line Input
Any voltage from 85 to 265 Vac
    Frequency: Any freq from 48 to 62 Hz
Signal Input Frequency Range: 0 to 100,000 pulses per minute (higher frequencies are possible when using internal frequency divisor)
Resolution: From 0.01 RPM
Accuracy: ±0.04% display update every pulse or 0.5 seconds, whichever is longer Isolated High/Low Alarm Output: 5 A, 230 Vac
Settable Alarm Range: 0 to 9999
Transducer Signal Input: 0 to 5 to 0 to 24 Vdc
Display Range: 0.001 to 99,990
Units of Operation: User programmable, any unit sensor/pickup
Power Supply: 5V @ 50 mA Isolated Alarm Relay Output Ratings: 240 Vac @ 5A MECHANICAL
Display Type: LED, red, 4 digit, 13 mm (1") H Housing Type (With Supplied Gasket in
NEMA 4X Panel): NEMA 4X Connector Style (Pluggable Connector
Optional): 12-position 5 mm european-style Terminal Block Torque Setting: 4.4 in-lb max or 0.5 N-M
Faceplate Material: Polycarbonate with polycarbonate overlay
Housing Material: Aluminum
Length (Panel Depth): 117.5 mm (4.6")
Width: 115.3 mm (4.5")
Weight: 382 g (13.5 oz) ENVIRONMENTAL
Operating Temperature Range: -10 to 45oC (15 to 115oF)
Operating Humidity Range: 95%, non-condensing

 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 OMDC-DM8000    11,820.00 Kč   Digital tachometer with alarm relay output
 OMDC-DM8000-R    13,080.00 Kč   Digital tachometer with 2 alarm relay outputs
 OMDC-PU-20E    4,350.00 Kč   Shaft-mounted NPN pickup sensor, 10 pulses per revolution
 OMDC-PU-40E    4,350.00 Kč   Shaft-mounted NPN pickup sensor, 20 pulses per revolution
 OMDC-PU-20EQUAD    5,330.00 Kč   Shaft-mounted NPN quadrature pickup sensor, 10 pulses per revolution
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: Comes with operator's manual.
 Pøíklad objednávky: (1) omdc-dm8000 Digital tachometer with alarm relay output = 11,820.00 Kč

   Stáhnout kompletní specifikace produktu ve formátu PDF
   Stáhnout  OMDC-DM8000 - DC motors & controls
 Souvísející odkazy
   OMPM-DC Series NEMA 56C Frame DC Motors: Permanent Magnet DC Motors - 1/3 to 2 HP, 1800 RPM Heavy Duty Industrial Motors
   OMDC-PU-E Series: AC or DC Motor Speed Sensors from 1- 20 pulses per revolution to monitor speed and direction.
   OMDC-CF Series Motor Speed Sensor: Speed Sensor Kit for AC or DC NEMA "C" Face Motors, for use with Tachometers and Close Loop Controls.