OME-DB-24P and OME-DB-24PD
24-Channel OPTO-Isolated Input Board

OME-DB-24P and OME-DB-24PD : 24-Channel OPTO-Isolated Input Board
Kliknģte zde pro vģtšķ obrįzek.

5,160.00  Kč *
     OME-DB-24P

  Optically Isolated Digital Input Channels
  Connects Directly to OME-PIO-D144
  AC/DC Signal Input
  AC Signal Input with Filter
  Input Buffer with Voltage Comparators
  Isolated Digital Input Sensing

The OME-DB-24P is a 24 channel isolated digital input daughter board for OME-PIO-D144 digital input board. The optically isolated inputs of the OME-DB-24P consist of a bi-directional opto-couples with a resistor for current sensing. You can use the OME-DB-24P to sense DC signals from TTL levels up to 24 V. You can also use OME-DB-24P to sense a wide range of AC signals. The OME-DB-24P registers a constant logic high if the frequency of the input AC signal is greater or equal to 1 kHz, and if the voltage of the AC signal is at least 4 Vrms. If you are using an AC input signal, you must short the AC filter jumper. You can use the board to isolate the computer from large common-mode voltages, ground loops and voltage spikes that often occur in industrial environments.

Specifications
I/O CONNECTOR ELECTRICAL SPECIFICATIONS
Configuration:
24 optically isolated digital input channels
Compatibility: TTL compatible
Connector: OME-DB-24P, one 50-pin header; OME-DB-24PD,
one 50-pin header and one 37-pin D-sub connector

DIGITAL INPUT
Number of channels:
24, each with
its own ground reference isolated from other channels
Maximum Input Voltage: 24 Vdc or 24 Vac
Input Impedance: 1.2 K Ω

SOURCE CURRENT
5 V inputs:
4 mA per channel (min)
24 V inputs: 20 mA per channel (min)
Response Time: 20 µs without filter/2.2 ms with filter
Power Supplies: +5 V @336 mA max
Dimensions: 132 H x 220 mm W (5.2 x 8.7")
Operating Temperature: 0 to 60°C (32 to 140°F)
Storage Temperature: -20 to 70°C (-4 to 175°F)
Humidity: 5 to 90% RH non-condensing


 Čķslo modelu  Cena (bez DPH)  Popis  Ks
 OME-DB-24P    5,160.00 Kč   24-channel OPTO-22 compatible opto-isolated input board, includes 1.5 m (5') 50-pin flat cable
 OME-DB-24P/DIN    5,490.00 Kč   OME-DB-24P with DIN-Rail mounting kit
 OME-DB-24PD    5,160.00 Kč   24-channel OPTO-22 compatible opto-isolated input board with D-Sub 37 connector, includes 1 m (3') 37-pin D-sub connector cable
 OME-DB-24PD/DIN    5,490.00 Kč   OME-DB-24PD with DIN-Rail mounting kit
 OME-CA-5015    920.00 Kč   50-pin flat cable, 1.5 m (5')
 OME-CA-3720    1,800.00 Kč   37-pin male-male D-sub connector cable 2 m (7')
 OME-CA-3710    1,500.00 Kč   37-pin male-male D-sub connector cable 1 m (3')
Obsah košķku Vyprįzdnit košķk Objednat
 * využijte možnost konzultovat ceny pųķmo s našimi prodejci  (tel: 596 311 899 - prodejnķ oddģlenķ, e-mail: viz. kontaktnķ informace)
 Poznįmka: Each board is supplied with complete operator’s manual on CD ROM.
OMEGACARE extended warranty program is available for models shown on this page. Ask your sales representative for full details when placing an order. OMEGACARE covers parts, labor and equivalent loaners
 Pųķklad objednįvky: (1) OME-DB-24P 24-channel OPTO-22 compatible opto-isolated input board, includes 1.5 m (5') 50-pin flat cable, (1) OME-DB-24P/DIN OME-DB-24P with DIN-Rail mounting kit = 10,650.00 Kč

 Literatura
   Stįhnout kompletnķ specifikace produktu ve formįtu PDF
 Manuįly
   Stįhnout  Daughter Boards for OME Series Digital I/O Boards
 Souvķsejķcķ odkazy
   OME-DB-16P: 16-Channel Isolated Digital Input Board