OME-DN-20/37/50, OME-DB-37
OME-DB-8225/1825/8025/8125/8325

Svorkovnice pro pou×itÝ s kartami pro sbýr dat sÚrie OME

OME-DN-20/37/50, OME-DB-37 <br>OME-DB-8225/1825/8025/8125/8325 : Svorkovnice pro pou×itÝ s kartami pro sbýr dat sÚrie OME
Kliknýte zde pro výtÜÝ obrßzek.

3,330.00  Kč *
     OME-DB-1825/1

OME-DB-8025 Screw Terminal Board
The OME-DB-8025 screw terminal board (Dimensions:102 L x 114 mm H [4.0 x 4.5"]) has two 20 pin flat cable connectors and blank pads for building ľ (1) an R/C filter circuit, (2) a voltage divider (for bringing voltage signals higher than that allowed by the A/D data-acquisition board (3) a current to voltage converter circuit. Two 2 m (7') CA-2020 20-pin flat cables are included with the board. The OME-DB-8025 screw terminal board acts as an analog I/O screw terminal panel to connect to OME-A-812PG or OME-PIO-D64, but can be used for digital I/O with any other OME series boards that have two 20-pin flat connectors for digital I/O.

 
OME-DB-1825 Screw Terminal Board
The OME-DB-1825 screw terminal board (Dimensions: 170 L x 114 mm H [6.7 x 4.5"]) has 32 single-ended channels or 16 differential channels. The OME-DB-1825 connects to the D-sub 37-pin connector on OME-PCI-1802, OME-PCI-1602, OME-PCI-1202 or OME-PCI-1002 using the D-sub 37 pin cable (OME-CA-3710 or OME-CA-3720). Other features of the board include blank pads for break detection, low-pass filter, current shunt and voltage attenuation. The OME-DB-1825 screw terminal board also provides an additional D-sub 37-pin connector to connect to OME-DB-889D multiplexer board(s).
Please use suffix ô/1ö or ô/2ö with the model number to specify the D-sub 37-pin cable length (OME-CA-3710 or OME-CA-3720).

 
OME-DB-8225 Screw Terminal Board with CJC
The OME-DB-8225 screw terminal board (Dimensions: 170 L x 114 mm H [6.7 x 4.5"]) has 16 single-ended channels or 8 differential channels. The OME-DB-8225 connects to the D-sub 37-pin connector on OME-PCI-1800(H/L), OME-A-826PG, OME-A-822PG or OME-A-8111 using the D-sub 37 pin cable (OME-CA-3710 or OME-CA-3720). Other features of the board include blank pads for break detection, low-pass filter, current shunt and voltage attenuation, and on-board cold junction circuit in analog input channel 1 (jumper selectable single-ended, differential mode). Please use suffix ô/1ö or ô/2ö with the model number to specify the D-sub 37-pin cable length (OME-CA-3710 or OME-CA-3720).

 
OME-DB-8125 Screw Terminal Board
The OME-DB-8125 screw terminal board (Dimensions: 221 mm x 115mm) has two 20-pin cable connectors and one 37-pin D-sub connector. Two 2-meter CA-2020 20-pin flat cables are included with the board. The OME-DB-8125 screw terminal board acts as an analog I/O screw terminal panel to connect to OME-A-812PG or OME-PIO-D64, but can be used for digital I/O with any other OME series boards that have two 20-pin flat connectors for digital I/O. Please use suffix /1 or /2 with the part number to specify the D-sub 37-pin cable length, 1 m (3') or 3 m (10') length respectively, (OME-CA-3710 or OME-CA-3720).

 
OME-DB-8325 Screw Terminal Board
The OME-DB-8325 screw terminal board (Dimensions: 220 mm x 114 mm) has D-sub 37-pin connector and connects to PISO-813 using OME-CA-3710 or OME-CA-3720. Please use suffix /1 or /2 with the part number to specify the D-sub 37-pin cable length, m (3') or 3 m (10') length respectively, (OME-CA-3710 or OME-CA-3720).
OME-DN-20:
Two 20-Pin Flat Connectors
Digital I/O Access for OME Boards with 20-Pin Connectors
145 x 75 mm (6 x 3")

 
OME-DN-37:
Two 37-Pin D-Sub Connectors (One for Expansion)
Analog or Digital I/O Access for OME Boards with 37-Pin, D-Sub Connectors
145 x 75 mm (6 x 3")

 
OME-DN-50:
One 50-Pin Flat Connector
Digital I/O Access for OME-PIO-D144, OME-PIO-D96, OME-PIO-D48, (Multiple OME-DN-50 Boards may be Required to Access all Channels on OME-PIO Series Boards)
145 x 75 mm (6 x 3")

 
OME-DB-37
37-Pin D-Sub Connector
Analog or Digital I/O Access for OME Boards with 37-Pin, D-Sub Connectors
Direct Connect
130 x 78 mm (5 x 3")


 ╚Ýslo modelu  Cena (bez DPH)  Popis  Ks
 OME-DN-20    2,430.00 Kč   svorkovnice pro montß× na liÜtu DIN pro 2x 20 pinovř plochř
 OME-DN-37    2,730.00 Kč   svorkovnice pro montß× na liÜtu DIN s 2x 37 pinovřm Canon konektorem (1 pro rozÜÝ°enÝ), obsahuje 37 pinovř kabel dÚlky 1 m (OME-CA-3710)
 OME-DN-50    2,730.00 Kč   svorkovnice pro montß× na liÜtu DIN s 50 pinovřm konektorem, obsahuje 50 pinovř kabel dÚlky 1,5 m (OME-CA-5015)
 OME-DB-37    2,430.00 Kč   svorkovnice s 37 pinovřm Canon konektorem - redukce
 OME-DB-1825/2    3,630.00 Kč   Svorkovnice pro kanßly analogovÚ vstupy s kabelem 37 pin Canon dÚlky 2 m
 OME-DB-8025    2,430.00 Kč   Svorkovnice pro digitßlnÝ I/O vŔetný dvou 20 pinovřch plochřch kabel¨ dÚlky 2 m (OME-CA-2020)
 OME-DB-8125    3,030.00 Kč   Svorkovnice pro digitßlnÝ I/O vŔetný dvou 20 pinovřch plochřch kabel¨ dÚlky 2 m (OME-CA-2020) a jednoho 37 pinovÚho kabelu dÚlky 1 m (OME-CA-3710)
 OME-DB-8225/1    3,030.00 Kč   Svorkovnice pro analogovÚ vstupy karet OME-PCI-1800(H/L) vŔetný kabelu dÚlky 1 m
 OME-DB-8325/1    2,730.00 Kč   svorkovnice se soustavou obvod¨, obsahuje 37 pinovř kabel dÚlky 1m (OME-CA-3710 nebo OME-CA-3720)
 OME-DB-8325/2    3,030.00 Kč   svorkovnice se soustavou obvod¨, obsahuje 37 pinovř kabel dÚlky 2m (OME-CA-3710 nebo OME-CA-3720)
Obsah koÜÝku Vyprßzdnit koÜÝk Objednat
 * vyu×ijte mo×nost konzultovat ceny p°Ýmo s naÜimi prodejci  (tel: 596 311 899 - prodejnÝ oddýlenÝ, e-mail: viz. kontaktnÝ informace)

 Literatura
   Stßhnout kompletnÝ specifikace produktu ve formßtu PDF