PHE-9150 Series
pHact pH Sensors with Built-in Differential Preamplifier and ATC

PHE-9150 Series : pHact pH Sensors with Built-in Differential Preamplifier and ATC
Kliknìte zde pro vìtší obrázek.

9,900.00  Kč *
     PHE-9153-15

  Built-In Differential Preamplifier
  Automatic Temperature Compensation
  High Temperature
  Low Maintenance
  Long Insertion Length
  Any Angle Orientation

The pHACT is a Fast Acting pH Sensor, with a built-in differential amplifier and 100Ω Platinum RTD Automatic Temperature Compensation sensor that provides a compensated output compatible with any pH meter. It is an ideal solution for ground loop problems, since it has a built-in solution ground and low impedance output, making the pHACT immune to noise. The PPS molded body has a high chemical resistance. The PHE-9150 series uses a High pH glass formulation, the perfect choice for extreme pH applications, with a triple PTFE junction reference cell. Coupled with the novel Plunger electrode design, this sensor assures low maintenance in most applications. The PHE-9151 is manufactured for low viscosity and in-line use, with a 3 /4 ' or 1' MNPT. It is ideal for the pulp and paper industry, as well as electroplating and petro-chemical applications. The PHE-9153 has 0.5' (12mm) insertion length, while PHE-9151 has 2.3' (59mm) for use in large pipes. PHE-9150/52 are manufactured in such a way that can be used in-line or submersible applications, with a 3 /4 " or 1' MNPT. While the PHE-9150 has only 0.9' (23mm) insertion length, the PHE-9152 offers 2.3' (59mm), to be able to reach into large diameter pipes, or tanks.

For complete product specifications see the Related Links section at the bottom of this page.


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 PHE-9153-15    9,900.00 Kč   pHACT 3/4' MNPT sensor
 PHE-9151-15    9,900.00 Kč   pHACT 3/4' MNPT sensor with long insertion
 PHE-9152-15    9,900.00 Kč   Long length insertable sensor
 PHE-9152-20    11,100.00 Kč   Long length insertable sensor with 4.6 m (20') of cable
 PHE-9150-15    9,900.00 Kč   pHACT sensor with recessed bulb
 PHE-9150-15-HT    10,950.00 Kč   pHACT sensor with recessed bulb and high temperature reference cell
 PHA-10    360.00 Kč   pH 10 buffer solution, 500 ml (1 pt)
 PHA-10-GAL    900.00 Kč   pH 10 buffer solution 4L (1 gal)
 PHA-4    360.00 Kč   pH 4 buffer solution, 500 ml (1 pt)
 PHA-4-GAL    900.00 Kč   pH 4 buffer solution, 4L (1 gal)
 PHA-7    360.00 Kč   pH 7 buffer solution, 500 ml (1 pt)
 PHA-7-GAL    900.00 Kč   pH 7 buffer solution, 4L (1 gal)
 PHA-DI    360.00 Kč   De-ionized water, 500 ml (1 pt)
 PHA-DI-GAL    900.00 Kč   De-ionized water, 4L (1 gal)
 PHAB-DI    900.00 Kč   20 single use foil packets of de-ionized water
 PHAB-PH    900.00 Kč   5 each single use foil packets of pH-4, pH-7, pH-10, and de-ionized water
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: Comes complete with electrode care instruction sheet and 4.6 m (15 ft) of cable.

For non standard cable lengths, replace the suffix "15" in the model number with the required length in feet, add $2 per foot to price. (Additional per foot cost applies to the entire cable length.)

For HF/Fluoride resistant electrode, add suffix "-HF" to model number, add $50 to price.

For high temperature reference cell, add suffix "HT" to model number, add $35 to price.


 Pøíklad objednávky: (1) PHE-9153-15 pHACT 3/4 = 9,900.00 Kč

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Manuály
   Stáhnout  Electrode Care - Electrode Care Information
 Souvísející odkazy
   PHA-4, PHA-7 and PHA-10: Pre-mixed pH Calibration Solutions
   PHCN-37 ORCN-37: pH Controller/ORP Controller