PHUCN601, PHUCN610, PHUTX601
pH, ORP and Conductivity Controller and Transmitter

PHUCN601, PHUCN610, PHUTX601 : pH, ORP and Conductivity Controller and Transmitter
Kliknìte zde pro vìtší obrázek.

29,100.00  Kč *
     PHUCN601

  For pH, ORP, Conductivity/Resistivity
  1/4 DIN, NEMA 4X, Polycarbonate Enclosure
  User-Friendly Design with Interior LCD Menu
  Easy to Read with Large, Bright LED Display
  Quick and Easy to Calibrate
  Reduces Chemical Consumption with Cycle Timed Relays on Controllers
  Two Control Relays with Third Relay for High/Low Alarm on Controllers

The PHUCN600 Series multi-parameter controller is a microprocessor-based controller capable of measuring one of the following parameters, pH, ORP, or conductivity.
When shipped from the factory, the PHUCN600 Series is not set to measure any one parameter.When the PHUCN600 Series is powered up for the first time, it will display the meter selection screen where the meter type must be selected. This meter selection screen will only be displayed when the PHUCN600 Series is powered up for the first time.
After the user selects a meter type the PHUCN600 Series will remain set to that meter type until it is changed with the meter selection menu function in the Utilities menu.
To return the PHUCN600 Series to its factory settings, the user must re-select the current meter type from the meter selection menu function. This will override all set-points and return all settings back to the factory settings. The PHUCN600 Series User’s menu has been divided into five main categories:

  • Calibration, used to calibrate the PHUCN600 Series with the selected sensor
  • Utilities, used to manually control or override the outputs
  • Setup, used to configure the PHUCN600 Series many options
  • Diagnostics, used to troubleshoot any problems
  • Outputs, used to configure the PHUCN600 Series outputs.
There are two displays on the PHUCN600 Series. A bright LED numeric display with bar graph on the outside front panel, and a 2-line, 16-character LCD display on the inside. The LED readout on the outside panel can be seen several yards away. The distinctive, Color coded bar graph will immediately indicate if you are within the process parameters that you set (green), if the control relays are on (yellow) and if you are in alarm condition (red). This makes diagnosing pump and alarm malfunctions easy. All configuration and control functions are performed on the LCD menu on the inside front panel.
A universal mounting kit is included for surface, panel and pipemount applications. The 1/4" DIN enclosure makes panel-mount cutouts and engineering simple.
Complete and versatile the PHUTX600 is the 1/4 DIN two wire transmitter which can measure Conductivity, pH or ORP. PHUTX600 comes complete with a universal mounting kit for surface, panel and pipe-mount applications. The NEMA 4X 1/4 DIN enclosure is perfect for stand-alone or panel-mount operation.
PHUCN600 and PHUTX600 Series are packaged in a rugged NEMA 4X polycarbonate enclosure making it ideally suited for heavy-duty applications such as industrial wastewater neutralization, municipal water and wastewater, pulp and paper, and process control.

The PHE-600-SB Salt Bridge kit required for use of the pH and ORE sensors is sold separately. pH and ORE sensors can not be used without the Salt Bridge kit.


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 PHUCN601    29,100.00 Kč   120 Vac pH/ORP conductivity
 PHUCN610    29,100.00 Kč   240 Vac pH/ORPconductivity
 PHUTX601    16,200.00 Kč   Transmitter pH/ORP conductivity
 PHE-600    17,700.00 Kč   1 1/2 NPT differential pH electrode, PPS sensor body 180 mm (7.1") long 55 mm (2.14") diameter
 ORE-600    17,700.00 Kč   1 1/2 NPT differential ORP electrode, PPS sensor body 180 mm (7.1") long 55 mm (2.14") diameter
 PHE-610    18,300.00 Kč   Compression fitting pH electrode for 7/8" to 5" variable insertion, 229 mm (9") long, 28 mm (1.125") diameter
 ORE-610    18,300.00 Kč   Compression fitting ORP electrode for 7/8" to 5" variable insertion
 PHE-620    19,650.00 Kč   Hot tap pH electrode for extended lengths 7/8" to 6" variable insertion
 ORE-620    19,650.00 Kč   Hot tap ORP electrode for extended lengths 7/8" to 6" variable insertion
 CDE-600-001    9,000.00 Kč   0.01 cell constant 0 to 2 µS/cm3 and 0 to 19.99 MΩ/cm3 epoxy low temp cond probe
 CDE-600-01    5,970.00 Kč   0.1 cell constant 0 to 20 & 0 to 200 µS/cm3 epoxy low temp cond probe
 CDE-600-1    5,970.00 Kč   1 cell constant 0 to 2000 µS/cm3 epoxy low temp cond probe
 CDE-600-10    5,970.00 Kč   10 cell constant 0 to 20 mS/cm3 epoxy low temp cond probe
 CDE-600-50    6,600.00 Kč   50 constant 0 to 200 mS/cm3 epoxy low temp cond probe
 CDE-610-001    11,250.00 Kč   0.01 cell constant 0 to 2 µS/cm3 & 0 to 19.99 MΩ/cm3 epoxy high temp cond probe
 CDE-610-01    8,400.00 Kč   0.1 cell constant 0 to 20 and 0 to 200 µS/cm3 epoxy high temp cond probe
 CDE-610-1    8,400.00 Kč   1 cell constant 0 to 2000 µS/cm3 epoxy high temp cond probe
 CDE-610-10    8,400.00 Kč   10 cell constant 0 to 20 mS/cm3 epoxy high temp cond probe
 CDE-610-50    9,000.00 Kč   50 cell constant 0 to 200 mS/cm3 epoxy high temp cond probe
 PHE-600-SB    2,760.00 Kč   † Salt Bridge kit kit with PVDF outer junction (3 pack) for required for use with PHE/ORE-600 Series sensors
 PHE-612-SB    2,760.00 Kč   † Salt Bridge kit with PVDF outer junction (3 pack) for PHE/ORE-610/620 Series sensors
 PHE-600-C-(*)   Kontaktujte prodejce  $2.00/foot Interconnect cable for PHE/ORE-600 Series
 PHE-600-EP    1,530.00 Kč   Electrode protector
 PHE-600-JB    2,010.00 Kč   Junction box with integrated terminal strip.
 PHE-610-EP    1,530.00 Kč   Electrode protector for PHE/ORE-610/620
 PHE-620-BVA    8,550.00 Kč   PVC hot tap ball valve assembly
 PHA-10    360.00 Kč   pH 10 buffer solution 500 ml (1 pt)
 PHA-10-GAL    900.00 Kč   pH 10 buffer solution 4L (1 gal)
 PHA-4    360.00 Kč   pH 4 buffer solution 500 ml (1 pt)
 PHA-4-GAL    900.00 Kč   pH 4 buffer solution 4 L (1 gal)
 PHA-7    360.00 Kč   pH 7 buffer solution 500 ml (1 pt)
 PHA-7-GAL    900.00 Kč   pH 7 buffer solution 4 L (1 gal)
 PHA-DI    360.00 Kč   De-ionized water 500 ml (1 pt)
 PHA-DI-GAL    900.00 Kč   De-ionized water 4 L (1 gal)
 PHAB-DI    900.00 Kč   20 single use foil packets of de-ionized water
 PHAB-PH    900.00 Kč   5 each single use foil packets of pH-4, pH-7, pH-10, and de-ionized water
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: Comes complete with operators manual.

* Insert cable length in feet.

†The PHE-600-SB Salt Bridge kit required for use of the pH and ORE sensors is sold separately. pH and ORE sensors can not be used without the Salt Bridge kit.


 Pøíklad objednávky: (1) PHE-600 pH Electrode, (1) PHUTX601 Transmitter = 33,900.00 Kč

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Manuály
   Stáhnout  PHUCN600 - Multi-Parameter Controller & Analyzer (NOTE: 40MB)
   Stáhnout  PHUTX601 - Multi-Parameter Transmitter (NOTE: 21MB)
   Stáhnout  PHE--600/610, ORE-600/610 - Differential pH and ORP Probes
   Stáhnout  CDE-600/610 - Conductivity Cells