PX1005
Thin Film Cryogenic Pressure Transducer

PX1005 : Thin Film Cryogenic Pressure Transducer
Kliknìte zde pro vìtší obrázek.

45,000.00  Kč *
     PX1005L1-1KAV

  High Performance
  High Reliability
  0.1% Stability for 18 months
  Operates from -196 to +149°C (-320 to +300°F)
  Exceptional Calibration Stability

OMEGA’s PX1005 Sputtered Thin Film Pressure Transducer was designed for cryogenic service; it can operate in temperatures from -196°C to +149°C (-320°F to +300°F.) Yet, even in these difficult temperatures, it provides outstanding accuracy, long-term calibration stability and reliability. Static accuracy is ±0.25%, and thermal zero and sensitivity shifts over the compensated range of -196°C to +27°C (-320°F to +80°F) are less than ±0.01%/°F. The all-welded stainless-steel pressure cavity and double-isolated case ensures reliability in the tough environments normal to cryogenic service. OMEGA’s thin film technology makes this premium performance possible. The strain gages are sputter-deposited, forming a molecular bond with the substrate. There is virtually no shift, drift, or creep to cause the transducer’s calibration to change. OMEGA’s PX1005 is available in many standard ranges from 15 psi to 1,000 psi. A calibration record is supplied with every unit.

SPECIFICATIONS Excitation: 10 Vdc
Full Range Output: 30 mV nominal, 26 mV minimum
Residual Unbalance: 0 mV ±5% FSO at zero pressure
Input Resistance: 400 Ω nominal
Output Resistance: 400 Ω nominal
Insulation Resistance: 100 MΩ or greater @ 45 Vdc
Shunt Calibration: Provisions for single-arm, external shunt calibration
Sensing Element: 4-active-arm bridge using sputter-deposited thin-film elements.
Accuracy: Combined linearity, hysteresis and repeatability: ±0.25% FSO, BSL [Note: Performance is determined at 25°C ±1°C (77°F ±2°F), open circuit, rated excitation, unless otherwise specified]
Operating Temp Range: -196 to 149°C (-320 to 300°F)
Compensated Temp Range: -196 to 27°C (-320 to 80°F)
Thermal Effects:
   Span: ±0.01% FSO/°F
   Zero: ±0.01% FSO/°F
Vibration Sensitivity: At 35 g peak from 10 Hz to 2000 Hz (1/2" D.A.), the output shall not exceed 0.04% FSO/g for 15 psi units decreasing logarithmically to 0.003% FSO/g for 1000 psi units
Natural Frequency: 35 kHz at 1000 psi decreasing logarithmically 5 kHz at 15 psi
Shock: 100 g, 11 ms half sine wave without calibration shift or damage
Humidity: Per MIL-STD-810, method 507.1
Proof Pressure: 200% of rated pressure will not cause changes in performance beyond the specified tolerances
Burst Pressure: 3 times rated pressure
Wetted Parts: 17-4 PH vacuum melt or 15-5 PH stainless steel
Pressure Fitting: 7/16-20 male per MS33656-4
Mounting Isolation: Case isolation ensures that the sensing element will not be affected by external stresses
Mating Connector: PCS06E-10-6S(SR) (sold separately)
Weight: 145 g (5 oz) maximum


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 PX1005L1-015AV    45,000.00 Kč   0-15 PSIA cryogenic pressure transducer, with integral electrical connector
 PX1005L1-025AV    45,000.00 Kč   0-25 PSIA cryogenic pressure transducer, with integral electrical connector
 PX1005L1-050AV    45,000.00 Kč   0-50 PSIA cryogenic pressure transducer, with integral electrical connector
 PX1005L1-100AV    45,000.00 Kč   0-100 PSIA cryogenic pressure transducer, with integral electrical connector
 PX1005L1-250AV    45,000.00 Kč   0-250 PSIA cryogenic pressure transducer, with integral electrical connector
 PX1005L1-500AV    45,000.00 Kč   0-500 PSIA cryogenic pressure transducer, with integral electrical connector
 PX1005L1-1KAV    45,000.00 Kč   0-1,000 PSIA cryogenic pressure transducer, with integral electrical connector
 PCS06E10-6S    4,200.00 Kč   Mating connector for PX1005 (sold separately)
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: Some discoloration of the pressure connection and surrounding area may occure due to the hot/cold calibration of this product.

 Pøíklad objednávky: (1) PCS06E10-6S mating connector (sold separately), (1) PX1005L1-100AV 0-100 PSIA Cryogenic pressure transducer, with MS33656-4 port and an integral connector = 49,200.00 Kč

(1) (2)
PX1005L1-
Popis voleb
(1) Range (psi)
  Vyberte 015 pro 0-15, 025 pro 0-25, 050 pro 0-50, 100 pro 0-100, 250 pro 0-250, 500 pro 0-500, 1K pro 0-1000
(2) Units
  Vyberte AV pro Absolute Model, SV pro Sealed Gage Model
 Poznámka: ne všechny kombinace jsou správné, ovìøte si správnost èísla modelu.

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Souvísející odkazy
   DP25B Series: 1/8 DIN Process Meter & Controller
   DP41: 1/8 DIN High Performance Temperature, Process and Strain Meter