PX6000-MV
Diffused Semiconductor Pressure Transducer
Rugged Aerospace Design

PX6000-MV : Diffused Semiconductor Pressure Transducer<br>
Rugged Aerospace Design
Kliknėte zde pro vėtší obrázek.

12,900.00  Kč *
     PX6000L1-100GV

  High Reliability
  Long Term Stability
  All Stainless Steel Case
  Vacuum Range Available
  5 Point NIST Calibration Certificate Included

OMEGA’s PX6000 Series pressure transducers fit easily into your application. These low-cost transducers are small and light, and mounting requires no bulky structures. You select from 3 electrical terminations and 6 pressure fittings. The sensor is a small [about 2.54 cm (0.1")] square silicon chip with 4 diffused strain gages, mounted in the stainless steel case. Laser-trimmed resistors provide temperature compensation and adjust zero balance and span. The 30 mV full range output is compatible with most amplifiers and data acquisition systems.

The PX6000 uses solid state media isolation for improved reliability. Thin films of chemically inert materials are deposited or grown on the chip surface to provide electrical isolation between the sensor and pressure medium. The sensor is less sensitive to vibration and more dependable in high-shock environments. Corrosion resistance is outstanding, and the isolation will remain effective because there is no gel or oil column to deteriorate.


The PX6000 is also available in metric configurations, with G1/4 or G1/8 ports, and models from 0-1 to 0-25 bar pressure ranges. Please see the PXM6000 for complete details, or contact our Pressure department for more information..

SPECIFICATIONS
ELECTRICAL
Excitation: 10 Vdc
Output: 3 mV/V ± 10%
Input Resistance: 2000 Ω minimum
Output Resistance: 1000 Ω minimum, 1500 Ω maximum
Zero Balance: 0 mV ±5% FSO
Dielectric Isolation Resistance: 100 MΩ minimum at 50 Vdc applied between the case or a conductive medium and the bridge circuit
Sensing Element: 4-active-arm bridge using a micro-machined diffused silicon diaphragm sensor, thin-film media and dielectric isolation barriers
Temperature Sensor: Output resistance @ 24°C (75°F) 900 to 1500 Ω
Temperature Coefficient: 8% min, 10% max per 55.5°C (100°F)

PERFORMANCE
Accuracy: Combined linearity, hysteresis and repeatability ≤±0.25% FS for all ranges

ENVIRONMENTAL
Operating Temp Range: -54 to 150°C (-65 to 300°F)
Compensated Temp Range: -54 to 121°C (-65 to 250°F)
Thermal Effects:
    Span: ≤±0.02% of FS/°F
    Zero: ≤±0.02% of FS/°F
Vibration Sensitivity: At 35g peak sinusoidal vibration from 10 Hz to 2000 Hz (½" D.A.), the output shall not exceed 0.04% FS/g for 15 psi range to 0.005% FS/g for 100 psi and above
Natural Frequency: Greater than 35 kHz for 100 psi and above
Shock: 100 g, 11 ms half sine wave without damage

PRESSURE
Proof Pressure: 2 times rated pressure will not cause changes in performance beyond the specified tolerances
Burst Pressure: 3 times rated pressure for pressure ranges below 200 psi, or 2.5 times rated pressure for pressure ranges above 200 psi will not cause rupture of the pressure sensor

MECHANICAL
Wetted Parts: 316 stainless steel, silicon nitride, Pyrex® glass, epoxy, Kovar®
Electrical Connection:
    Standard: PTIH-10-6P
    Optional: 0.6 m (2') cable or 4-pin solder terminal header
Pressure Port:
    Standard: MS33656-4 male
    Optional: MS33649-4 female, 1/4-18 or 1/8-27 NPT male or female
Weight: 4 oz max, excluding pressure fitting and electrical connection
Mating Connector: PTS06A-10-6S (not included)


 Číslo modelu  Cena (bez DPH)  Popis  Ks
 PX6000L1-30VACV    12,900.00 Kč   30-0 in-Hg transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
 PX6000L1-015AV    12,900.00 Kč   0-15 psi Absolute Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
 PX6000L1-020AV    12,900.00 Kč   0-20 psi Absolute Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
 PX6000L1-050AV    12,900.00 Kč   0-50 psi Absolute Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
 PX6000L1-100AV    12,900.00 Kč   0-100 psi Absolute Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
 PX6000L1-200AV    12,900.00 Kč   0-200 psi Absolute Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
 PX6000L1-300AV    12,900.00 Kč   0-300 psi Absolute Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
 PX6000L1-015GV    12,900.00 Kč   0-15 psi Gage Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
 PX6000L1-020GV    12,900.00 Kč   0-20 psi Gage Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
 PX6000L1-050GV    12,900.00 Kč   0-50 psi Gage Pressure transducer with PT1H-10-6P connector, MS33656-4 male and millivolt output
 PX6000L1-100GV    12,900.00 Kč   0-100 psi Gage Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
 PX6000L1-200GV    12,900.00 Kč   0-200 psi Gage Pressure transducer with PT1H-10-6P connector, MS33656-4 male and millivolt output
 PX6000L1-300GV    12,900.00 Kč   0-300 psi Gage Pressure transducer with PT1H-10-6P connector, MS33656-4 male and millivolt output
 PTS06A-10-6S    1,470.00 Kč   Mating connector (sold separately)
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddėlení, e-mail: viz. kontaktní informace)
 Poznámka: Metric Ranges Available - Consult Engineering
 Pøíklad objednávky: (1) PX6000L1-100GV is a 100 psi Gage pressure transducer with an MS33649-4 male pressure connection = 12,900.00 Kč

(1) (2) (3) (4) (5) (6)
PX6000 -
Popis voleb
(1) Pressure Port
  Vyberte L pro MS33656-4 Male, M pro MS33649-4 Female, A pro 1/8-27 NPT Male, B pro 1/8-27 NPT Female, C pro 1/4-18 NPT Male, D pro 1/4-18 NPT Female
(2) Electrical Connection
  Vyberte 1 pro PT1H-10-6P Connector or equal (mating connector not included), 0 pro 2' (6m) cable (std) +2$/ft over 2', 3 pro 4-pin Eyelet Header (no charge)
(3) Range
  Vyberte 30 pro 30 to 0 in-Hg (Vacuum only), 015 pro 0-15 psi, 020 pro 0-20 psi, 050 pro 0-50 psi, 100 pro 0-100 psi, 200 pro 0-200 psi, 300 pro 0-300 psi
(4) Units
  Vyberte VAC pro Vacuum Model, G pro Gage Model, A pro Absolute Model
(5) Output
  Vyberte V pro mV/V Output, 5T pro 0 to 5 Vdc Output, I pro 4 to 20mA Output
(6) Options
  Vyberte pro No Options, -CAL11 pro 11 point NIST Calibration $250 adder, -xxFT pro Extra length of cable $2/ft over 3ft
 Poznámka: ne všechny kombinace jsou správné, ovėøte si správnost čísla modelu.

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Manuály
   Stáhnout  Diffused Semiconductor Pressure Transmitter/Transducer
 Souvísející odkazy
   DP25B Series: 1/8 DIN Process Meter & Controller
   DP41: 1/8 DIN High Performance Temperature, Process and Strain Meter