PXTX-507
2-Wire Transmitter for Load Cells and Pressure Transducers, Converts mV, V, or mA Input to 4 to 20 mA Output

PXTX-507 : 2-Wire Transmitter for Load Cells and Pressure Transducers, Converts mV, V, or mA Input to 4 to 20 mA Output
Kliknìte zde pro vìtší obrázek.

5,970.00  Kč *
     PXTX-507

  Provides Transducer Excitation for one ≥350 Ω Bridge
  Selectable Input Ranges
  Works with 350 Ohm to 5 kΩ Strain Sensors
  Zero and Span Adjustability
  Converts mV/V sensor output to 4 to 20 mA Loop Signal
  Rugged, Industrial Housing


SPECIFICATIONS
Input Span: User selectable, 0.5 mV/V to 4 mV/V
Input Impedance: ±10 MΩ
Output Span: 4 to 20 mA
Min Output Current: 3.75 mA typical
Max Output Current: 22 mA typical
Supply Voltage Range: 8 to 40 Vdc
Transducer Excitation: Selectable, 350 to 500Ω 1.24 Vdc @ 3.54 mA, >500Ω 2.5 Vdc @ 3.5 mA; 5.0 mA max
Zero and Span Adjustability: 10% of any selected range
Accuracy: 0.5% of any adjusted span (includes linearity, hysteresis, stability)
Repeatability: 0.05% of span
Response Time: 200 ms typical
Stability:
Zero: Within 0.02% of span/°C or 5 µA, whichever is greater
Span: Within 0.01% of span/°C Max Lead-Wire Resistance Effect: Less than 0.25 µV per Ω Max Change-in-Supply Voltage
Effect: 0.05% of span over supply range
Output Ripple: Less than 0.05% of span, rms
Operating Temperature Range: -45 to 85°C (-49 to 185°F)


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 PXTX-507    5,970.00 Kč   Two-wire strain transmitter
 PXTX-507-EPH1   Kontaktujte prodejce  NEMA 7 and NEMA 4 (IP65) enclosure includes mounting clips, springs and hardware
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF
 Manuály
   Stáhnout  STRAIN/BRIDGE INPUT 2-WIRE TRANSMITTER WITH 4-20 mA OUTPUT