Resistance Wire
Resistance Wire and Heat-Curing Adhesive for Transducer Strain Gages

Resistance Wire : Resistance Wire and Heat-Curing Adhesive for Transducer Strain Gages
Kliknìte zde pro vìtší obrázek.

7,200.00  Kč *
     TT300

  RESISTANCE WIRE FOR TEMPERATURE COMPENSATION AND ZERO BALANCE
  TT300 HEAT-CURING ADHESIVE

TT300 cement is a heat-curing, two-component, epoxy resin adhesive which is used to bond polyimide-backed strain gages for strain measurement in temperatures up to 200°C (392°F). The adhesive can also be used to bond epoxy- backed gages, but the maximum operating temperature is then limited to 150°C (302°F).


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 SGB-36    2,100.00 Kč   36 gage Balco wire (500 ft) for zero and span temperature compensation, 19.7 Ohms/ft, temp. coefficient 0.45%/°C
 SGC-36    2,100.00 Kč   36 gage Copper wire (500 ft) for zero and span temperature compensation, 0.415 Ohms/ft, temp. coefficient 0.39%/°C
 SGM-36    780.00 Kč   36 gage Manganin wire (200 ft) for zero balance, 15.2 Ohms/ft, temp. coefficient 0.002%/°C
 TT300    7,200.00 Kč   Heat curing, two component adhesive kit for strain gage measurements up to 200°C (392°F)
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: TT300 KIT INCLUDES:
(2) 1 oz. resin bottles ( 1 /2 filled)
(2) 1 oz. hardener bottles ( 1 /2 filled)
(2) plastic funnels (35 mm diameter)
(2) brush caps
(1) 2 oz. bottle of acetone
(1) 2 oz. bottle of acid primer
(1) 2 oz. bottle of neutralizer
(1) 2 oz. bottle of resin solvent
(1) manual

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF