SLK/SLF Series
Spring Loaded Fittings for 1/4" Diameter Probes

SLK/SLF Series : Spring Loaded Fittings for 1/4
Kliknìte zde pro vìtší obrázek.

620.00  Kč *
     1/4-SLK

  Easy Installation on Any ¼" Diameter Probe (RTD, Thermcouple or Thermistor)
  Self Gripping Spring Design Allows Unlimited Adjustability
  Great For Installing Replacement Sensors in Thermowells
  Spring Loaded Fitting Can be Used with a Wide Variety of ½ NPT Connection Heads

These spring loaded fittings provide another easy way to utilize your Omega temperature sensors.

For example:

  • Do you need to install a 1/4" diameter sensor in a thermowell without the use of a connection head? Install the 1/4-SLK spring loaded fitting onto your sensor to insure proper contact with the bottom of your thermowell without worrying if your sensor is over inserted or under inserted into the thermowell bore.

  • If you need to install your sensor in a thermowell while also using an enclosure for your wire connections, the SLF-12-12-14 spring loaded fitting can be used along with one of our extensive line of sanitary or industrial connection heads.
  • Did you have a sudden failure and need to replace your thermowell mounted RTD or thermocouple? If you have one of our cuttable RTD Sensors or Thermocouple sensors, just cut the sensor to length, add a spring loaded fitting and you are up and running.


  • Installation is simple with no tools required, simply do the following:
  • To install the single sided 1-SLK fitting, slide the hex housing onto your probe with the 1/2 NPT threads pointed toward your thermowell or other suitable attachment point. Slide the self-gripping spring onto your probe with the wide end toward the hex housing and slide into place. The position of the assembly can then be adjusted as needed.


  • For the SLF12-12-14, slide the probe tip into the larger opening end of the fitting, twist the probe clockwise while pushing the probe through the fitting. Install the probe to the desired length, if needed the probe can be pulled through to re-adjust the position of the fitting.


  • Specifications:
  • Materials: 300 Series Stainless Steel.
  • Mounting Threads: The 1/4-SLK has a 1/2NPT threaded connection one end, the SLF-12-12-14 has a 1/2NPT threaded connection both ends.
  • Sheath Size: The springs used in these fittings are a self gripping design for use on standard 1/4" sheaths.
  • Spring Compression: These springs are designed for a nominal compression of approximately 1/2".
  • Spring material: 0.035" diameter music wire (ASTM A228)

  •  Èíslo modelu  Cena (bez DPH)  Popis  Ks
     1/4-SLK    620.00 Kč   Spring loading kit for ½ NPT ports
     SLF-12-12-14    550.00 Kč   Spring loaded fitting for use with ½ NPT connection heads
    Obsah košíku Vyprázdnit košík Objednat
     * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
     Poznámka: Comes complete with installation instructions.
     Pøíklad objednávky: (1) 1/4-SLK Spring loading fitting for 1/4'' probes without connection heads, (1) SLF-12-12-14 Spring loading fitting for 1/4'' probes with connection head or enclosure = 1,170.00 Kč

     Literatura
       Stáhnout kompletní specifikace produktu ve formátu PDF
     Souvísející odkazy
       PR-21 Series: Vibration Resistant Platinum RTD (PT100) Sensor with M12 Connector and Mounting Thread
       PR-22 Series: PT100 RTD Probes with M12 Molded Connectors
       PRCTL Series: Cut To Length RTD PT100 Sensor Probe For Field Adaptable Applications
       PRCU Series: Fast Response Copper Tip RTD Sensors 100 Ohm Class A DIN Platinum Element
       PRTFCU Series: Fast Response Copper Tip Thin Film RTD Sensors
       PR-10: General Purpose RTD (PT100) Probes with No Transition Junction Between Leads and Sheath
       PRTF-10 Series: General Purpose RTD Sensor Probe with PFA Insulated and Jacketed Cables
       PR-11: General Purpose RTD (PT100) Probe with Metal Strain Relief
       PRTF-11 Series: RTD Probes with Transition Fittings, Strain Relief Springs and PFA Insulated and Jacketed Cables for Industrial Applications
       PR-13: Quick Disconnect RTD (PT100) Probes with Standard Size Connector
       PRTF-13 Series: Platinum RTD Probe with pt100 Ohm Thin Film DIN Platinum RTD Element and 3 Prong Heavy Duty Connector
       PR-17: PT100 RTD Probe with Quick Disconnect Miniature Connector
       PRTF-17 Series: Platinum RTD Probes with 100 Ohm Thin Film RTD Element and 3 Prong Miniature Connector
       M12 Series Probes: Thermocouple Probes With and Without Mounting Threads and M12 Connectors
       M12M Series: Thermocouple Probes with Molded M12 Connectors
       TRP Series: Thermocouple Reference Probes
       KQXL,KMQXL, TJ36-CAXL, KMTXL, KHXL-: Super OMEGACLAD® XL Probes Very Low Drift at High Temperatures
       TJ36 Series: Rugged Heavy Duty Transition Joint Thermocouple Probes
       TJ36 and TJ48 Series with BX or SB: Armor Cable or Stainless Steel Overbraid Lead Heavy DutyTransition Joint Thermocouple Probes with Mini Male Connector
       TJ36-SB Series: Rugged Thermocouple Transition Joint Probe with Stainless Steel Braid over PFA Lead Wire and Miniature Male Connector/Cable Clamp
       TJ36-XCIB Series: High Temperature Lead Wire (Inconel® 600 Braid over Nextel® Ceramic-Insulation) Rugged Thermocouple Transition Joint Probe
       TJ36-XSIB Series: High Temperature Lead Wire (Inconel® 600 Braid over Silica Ceramic Insulation) Rugged Transition Joint Thermocouple Probes
       TJ36CAXL and TJ36NNXL: Super OMEGACLAD® XL Heavy Duty Transition Junction Thermocouple Probes - Super Accurate, Super Stable
       PRCTL Series: Cut To Length RTD PT100 Sensor Probe For Field Adaptable Applications