1/8 DIN Two-Wire, Current Loop Process Indicator with LCD Display

TX82B : 1/8 DIN Two-Wire, Current Loop Process Indicator with LCD Display
Kliknìte zde pro vìtší obrázek.
  FM Intrinsic Safety Certification
  Powered by 1 to 5 mA, 4 to 20 mA or 10 to 50 mA Signal
  2.5 V Max Voltage Drop
  Display to ±1,999, ±19,990 or ±199,900
  0.5" (12.7 mm) LCD
  100 to 2,000 Count Span Adjust
  2,000-Count Zero Suppression or Elevation
  Short 1/8 DIN Case
  Simple 2-Wire Hook-Up
  Safe Plug-in Screw-Clamp Connector


  -40 to 85°C Operating Temperature
  NEMA-4 Splash-Proof Lens Cover

Model TX82B is a 1/8 DIN-sized two-wire current-loop indicator that is powered directly by 1-5 mA, 4-20 mA or 10-50 mA process signals, with no need for external power connections. This reduces field wiring costs and provides immunity from most electrical noise encountered in process-control environments. The two-wire electrical hookup is easy via a plug-in screw-clamp connector, which is standard.

Readout of Process Variables
The TX82B provides extensive zero and span adjustment capability for direct readout in percent or in engineering units for process variables such as pressure, flow, temperature, or level. A 0.50 in (12.7 mm) high LCD display provides 3 1/2 active digits for readout to ±1,999, two jumper-selectable dummy right-hand zeros for display to ±19,990 or ±199,900, and five jumper-selectable decimal points. With the dummy zeros, the TX82B can thus be used to display the weight of heavy trucks in pounds or the volume of large tanks in gallons.

Easy to Configure and Calibrate
Both span and zero are fine-tuned with precision 15-turn potentiometers accessible behind the lens. Coarse zero and span steps as well as the dummy right-hand zero are selected by opening the case and changing push-on jumpers.

Intrinsic Safety Certification
FM intrinsic safety certification is standard. Intrinsic safety certification allows the unit to be used in worst-case hazardous environments with no need for explosion-proof housing, provided that an intrinsic safety barrier is used to limit the voltage and current that may be introduced in the hazardous environment. FM certification (USA) is for Class I, II, III, Division 1, Groups A,B,C,D,E,F,G. The FM certification number is 2P1A7.AX (3610:2010)

Built for Industrial Environments
Model TX82B is housed in a splash resistant case and requires a depth of less than 3.9" (100 mm) behind the panel. A splash-proof lens cover which meets NEMA-4 requirements is optional. Electrical connections are via a three-pole male header connector on the circuit board and a mating plug-in socket connector with screw clamps, which accommodate wire sizes of 0.5 to 2.5 mm (26 to 16 AWG). These supplied connectors provide easy and reliable electrical connections and meet UL and IEC-348 safety requirements.

 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 TX82B    5,300.00 Kč   Current loop indicator
 TX82B-ET    6,460.00 Kč   Current loop indicator with extended ambient range of -40 to 85°C (-40 to 185°F)
 SPC18    1,160.00 Kč   NEMA 4 splash proof lens cover
 SPC4    1,160.00 Kč   NEMA 4 heavy duty splash proof lens cover with screw clamp
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: Comes with complete operator's manual.
 Pøíklad objednávky: (1) TX82B current loop indicator = 5,300.00 Kč

(1) (2)
Popis voleb
(1) Current loop indicator
  Vyberte TX82B pro Current loop indicator, TX82B-ET pro Indicator with extended ambient range -40 to 85°C (-40 to 185°F)
(2) Options
  Vyberte prázdné pole pro Basic unit, -FS pro Custom configuration and calibration
 Poznámka: ne všechny kombinace jsou správné, ovìøte si správnost èísla modelu.

   Stáhnout kompletní specifikace produktu ve formátu PDF
   Stáhnout  TX82B - 1/8 DIN Current Loop Indicator