TX83A and TX84
4-20ma Loop Process Indicator in NEMA-4X Housing, 2 Wire

TX83A and TX84 : 4-20ma Loop Process Indicator in NEMA-4X Housing, 2 Wire
Kliknìte zde pro vìtší obrázek.
  FM Intrinsic Safety Certification
  Powered by 1 to 5, 4 to 20 or 10 to 50 mA Signal
  2.5 V Max Voltage Drop
  0.35 in (8.9 mm) LCD
  2,000-Count Zero Suppression or Elevation
  100 to 2,000 Count Span Adjust
  Selectable Dummy Right-Hand Zero
  -40 to 85°C Operation
  Compact, 2.9" Diameter Die-Cast Housing
  Waterproof to 35 kPa (5 psi)
  Shock Resistant to 55 g


  1/2 EMT Conduit Fitting
  1/2 NPT Pipe Fitting
  Relay-Track Mounting Adapters
  External Explosion-Proof Housing
  Companion Current Transmitters

Model TX83A is a two-wire current-loop indicator that is powered directly by a 1-5 mA, 4-20 mA or 10-50 mA process loop signal, with a maximum voltage drop of 2.5 V. No separate power supply connections are required. This reduces overall hardware and field wiring costs and provides immunity from most electrical noise encountered in process control environments. The electronics are isolated from the case.

Readout of Process Variables
The TX83A provides extensive zero and span adjustment capability, so that it can read out directly in percent or in engineering units for process variables such as pressure, flow, temperature, or level. Its liquid crystal display provides 3 1/2 active digits, a selectable dummy right-hand zero, and four programmable decimal points. By changing two internal jumpers, the normal positive slope response of the TX83A can be reversed, so that increasing the input decreases the reading.

Easy to Configure and Calibrate
Both span and zero are fine-tuned with precision multi-turn potentiometers. These are accessible through holes in the die-cast cover, which are normally sealed with fluorosilicone plugs. Coarse zero and span steps are selected by removing the cover with attached electronics and changing plug-in jumpers.

Designed for Harsh Environments
All versions of the TX83A are rated for operation from -40 to 85°C (-40 to 185°F) with specified accuracy. The case is made of die-cast metal and is waterproof to 35 kPa (5 psi). The electronics are firmly connected to the case top, so that the meter can withstand high vibration and shock. Mounting options include a male 1/2 EMT conduit fitting and a male 1/2 NPT pipe fitting in lieu of the normal rail or surface mount. These fittings eliminate the external screw terminals and provide a NEMA-4X rating.

Intrinsic Safety Certification
FM intrinsic safety certification is standard. Intrinsic safety certification allows the unit to be used in worst-case hazardous environments with no need for explosion-proof housing, provided that an intrinsic safety barrier is used to limit the voltage and current that may be introduced in the hazardous environment. FM certification (USA) is for Class I, II, III, Division 1, Groups A,B,C,D,E,F,G. The FM certification number is 2P1A7.AX (3610:2010).

Explosion-proof Housing Options
Two external NEMA-7 explosion-proof and NEMA-4 waterproof, sand-cast, copper-free aluminum enclosures with corrosion resistance "safety-blue" polyester powder-coating for use in hazardous locations. FM, UL, cUL Certification: Class I, Groups B, C, D; Class II, Groups E, F, G; and Class III, Type 4X. Demko/ATEX Certification: Ex II 2 G D EEx d IIC

Option EPW3 is a single-height enclosure for one TX83A loop-powered indicator. Option EPW2 is a double-height enclosure for a TX83A loop-powered indicator on top and a TX1500 Series isolated two-wire 4-20 mA transmitter on the bottom for indicating transmitter applications. Available with two female 1/2 NPT pipe fittings, all required internal mounting hardware, and mounting flanges for a wall or bulkhead.

 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 TX83A    10,260.00 Kč   Flat surface or relay track mounting
 TX84-2    10,860.00 Kč   EMT conduit mounting
 TX84    10,860.00 Kč   NPT pipe mounting
 MXS1    370.00 Kč   Spring retainers for TX83A in explosion proof housing EPW3
 MXS2    370.00 Kč   Spring retainers for TX83A in explosion proof housing EPW2
 EPW3-ATEX    4,950.00 Kč   NEMA 4 and NEMA 7 rated environmental enclosure with window, single height; includes MXS1 hardware (supplied with Demko/ATEX certificate)
 EPW2-ATEX    5,490.00 Kč   NEMA 4 and NEMA 7 rated environmental enclosure with window, double height for TX83A and TX1500 series transmitter; includes MXS1 and MXS2 hardware (supplied with Demko/ATEX certificate)
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: Comes with complete operator's manual.
 Pøíklad objednávky: (1) TX83A Current loop indicator with flat surface or relay track mounting = 10,260.00 Kč

(1) (2) (3)
Popis voleb
(1) Models
  Vyberte TX83A pro CMV - Meter to Case pro 700 Vp, TX84-2 pro EMT conduit mounting, TX84 pro NPT pipe mounting
(2) Mounting Options
  Vyberte prázdné pole pro Standard Unit, -MAT1 pro Adaptor plate for surface mount or 69.9 mm relay track-Available for TX83A only, -MDT1 pro Rail clamp for DIN relay track-Available for TX83A only
(3) Calibration and Certification
  Vyberte prázdné pole pro Standard Unit with mounting options, -FS pro Custom configuration and calibration
 Poznámka: ne všechny kombinace jsou správné, ovìøte si správnost èísla modelu.

   Stáhnout kompletní specifikace produktu ve formátu PDF
   Stáhnout  TX83 and TX84 - Two-Wire Current Loop Powered Indicators