TYPE
OMEGAFLEX® Low Density Polyethylene Tubing

TYPE : OMEGAFLEX® Low Density Polyethylene Tubing
Kliknìte zde pro vìtší obrázek.

900.00  Kč *
     TYPE-1418-100

  Specific Gravity: .921
  Hardness: 50 Shore D
  Tensile Strength, PSI: 1600

Polyethylene tubing is not to be used with barbed fittings due to its tendency to form stress cracks. Use compression-type fittings instead.

Specifications
Specific Gravity: .921
Tensile Strength, psi: 1600 Hardness: 50 Shore D
Elongation at Break, %: 500
Brittle Temperature: -60°C (–76°F)
Maximum Operating Temperature: 60°C (140°F)

Specifications shown are typical and are meant only as a guide. Field testing is recommended to find actual values in the given application.
Note: The listed working pressures are based on a short-term burst using a 4-to-1 safety factor.


 Èíslo modelu  Cena (bez DPH)  Popis  Ks
 TYPE-14170-500    2,250.00 Kč   1/4 OD (in), 0.17 ID (in)
 TYPE-1418-500    3,900.00 Kč   1/4 OD (in), 1/8 ID (in)
 TYPE-516316-500    4,200.00 Kč   5/16 OD (in), 3/16 ID (in)
 TYPE-516316-100    900.00 Kč   5/16 OD (in), 3/16 ID (in)
 TYPE-3814-100    1,200.00 Kč   3/8 OD (in), 1/4 ID (in)
 TYPE-1238-100    1,350.00 Kč   1/2 OD (in), 3/8 ID (in)
 TYPE-1238-500    6,000.00 Kč   1/2 OD (in), 3/8 ID (in)
 TYPE-5812-100    1,350.00 Kč   5/8 OD (in), 1/2 ID (in)
 TYPE-3458-100    1,350.00 Kč   3/4 OD (in), 5/8 ID (in)
 TYPE-7858-100    2,550.00 Kč   7/8 OD (in), 5/8 ID (in)
 TYPE-134-100    3,900.00 Kč   1 OD (in), 3/4 ID (in)
 TYPE-178-100    2,100.00 Kč   1 OD (in), 7/8 ID (in)
 TYPE-1141-100    4,200.00 Kč   1 1/4 OD (in), 1 ID (in)
 TYPE-134112-50    7,500.00 Kč   1 3/4 OD (in), 1 1/2 ID (in)
 TYPE-1418-100    900.00 Kč   1/4 OD (in), 1/8 ID (in)
Obsah košíku Vyprázdnit košík Objednat
 * využijte možnost konzultovat ceny pøímo s našimi prodejci  (tel: 596 311 899 - prodejní oddìlení, e-mail: viz. kontaktní informace)
 Poznámka: Specifications shown are typical and are meant only as a guide. Field testing is recommended to find actual values in the given application.
The listed working pressures are based on a short-term burst using a 4-to-1 safety factor.
 Pøíklad objednávky: (1) TYPE-14170-500 1/4 OD (in), 0.17 ID (in) tubing = 2,250.00 Kč

 Literatura
   Stáhnout kompletní specifikace produktu ve formátu PDF