Košík  |  Kontakt  |  English
Česko596 311 899
Mezinárodní+420 596311899

Váš zdroj informací pro měření a řízení průmyslových procesů.

RS-232 to RS-422 / 485 Converter

CAT-285

RS-232 to RS-422 / 485 Converter | CAT-285

RS-232 to RS-422 / 485 Converter

6,080Kč CAT-285

1 rok záruka RoHS
  • User Selectable RS-422 or RS-485
  • RS-485 User Selectable 2 or 4-Wire Operation
  • Intelligent Control of RS-485 Transmitter and Receiver
  • Td and Rd LED Indicators
  • DTE/DCE Compatible
  • Data Rates up to 64k BPS
Komunikační prostředky a konvertory - Zobrazit související produkty

Popis

The CAT-285 is a unique interface converter that can be configured by the user to convert either RS-422 or RS-485 to RS-232. When operating in RS-485 mode, the CAT-285 has an “intelligent” mode which provides control of the RS-485 line. When configured to operate as an RS-232 to RS-422 interface converter, the CAT-285 converts full duplex data, Td and Rd, between RS-232 and RS-422. As an RS-232 to RS-485 converter, the unit can be configured for either 2 or 4-wire operation. In either mode, the CAT-285 allows control of the transmitter so that multi-dropped operation can be accommodated. The CAT-285 can be configured to control its data flow in one of two ways. The first is via the use of RTS, pin 4, of the RS-232 port. In this case, the RS-485 transmitter will turn ON when RTS is turned on. When RTS is OFF, the CAT-285 is in the receive mode. In the 4-wire mode, the receiver is always on. The second method of controlling the RS-485 transmitter is to turn it on when Td data is applied to the RS-232 port.

The receiver also operates differently depending on whether the mode is 2 or 4-wire. In the 2-wire mode, when no data is received by the RS-232 receiver, the RS-485 receiver is switched ON. When data is detected for transmission, the receiver is switched OFF. In the 4-wire mode, the RS-485 receiver is constantly ON while the transmitter is switched as required. The CAT-285 is equipped with a five position dip switch that is used to select the following: RS-422 mode: 4-wire RS-485 mode: 2-wire RS-485 mode: 4-wire RS-485 mode: controlled by RTS RS-485 mode: controlled by data 220 ohm terminator: in or out The CAT-285 is also equipped with a DTE/DCE switch to allow reversing pins 2 and 3 on the RS-232 interface. Td and Rd LED indicators help verify operation.

For complete product specifications see the Related Links section at the bottom of this page.
Tabulka pro objednání(Vyberte si model a zadejte počet kusů)

Co koupili ostatní: Když vidíte tuto ikonu, klikněte na ní a uvidíte seznam zboží, které nakoupili ostatní lidé, když si objednali tento model.

Číslo modelu/ Popis
Kusů
RoHS
Popis
Klikněte pro rozbalení/sbalení seznamu zobrazujícího co nakoupili otatní s tímto produktemCAT-285
CAT-285 Star
6,080Kč
Dostupnost: 2 týdny
Soulad s RoHS je neznámý
RS-232 to RS-422/485 interface converter
  
DSUB-25-MF Star
2,840Kč
Dostupnost: 8 týdny
V souladu s RoHS
DIN rail interface module, 25-pin
Všechny ceny zobrazeny v Kč (bez DPH)
Příklad objednávání: (1) CAT-285 RS-232 to RS-422/485 interface converter, 6,080Kč