Košík  |  Kontakt  |  English
Česko596 311 899
Mezinárodní+420 596311899

Váš zdroj informací pro měření a řízení průmyslových procesů.

Strain/Microvoltmeter Indicator Controller
1/8 Din

DP2000-S Series

Strain/Microvoltmeter Indicator Controller, 1/8 Din | DP2000-S Series

Strain/Microvoltmeter Indicator Controller, 1/8 Din

15,600Kč DP2000-S3

1 rok záruka CE
  • Adjustable 1 to 10 Vdc Bridge Excitation Supply
  • ±1999 or ±9999 Count Display Span
  • Seven Overlapping Gain Ranges
  • Front-Panel Accessible Zero and Span Adjustments
  • Resolution Down to 1 or 2 µV/Count
  • Strain-Gauge Sensitivity Down to 0.20 mV/V
  • Ratiometric Measurement
  • 1 or 0.2 mV/Count Analog Output
  • LED or LCD Display
  • Automatic Polarity
  • Display Hold and Test
  • Screw-Terminal Barrier Strip
Zažízení pro měření tlaku a síly - Zobrazit související produkty

Popis

Starting from Oct 1st 2017, DP2000/9000 Series will be discontinued. As a possible substitute, please check out the DPPT Panel Meter or CNPT Controller for details.

The DP2000/9000-S is a meter/controller for use with pressure transducers and load cells which require bridge excitation and preamplification of microvolt signals. Deadload and tare adjustments make it suitable for weighing applications. Like process meters, it provides zero and span adjustments for direct readout in engineering units. It can also be used as a microvoltmeter with differential input. A universal 1/8 DIN case houses each meter. Choose any combination of display type (LED or LCD), operating power, input type and range, analog output, and digital or control outputs.

Excitation Supply and Preamplifier
The DP2000/9000-S provides a constant-voltage excitation supply, which is adjustable from 1 to 10V and can drive up to 30 mA. It also provides a high-impedance preamplifier, which is continuously adjustable so that signal levels from ±2.0 to ±500 mV can produce the fullscale display of ±1999 or ±9999 counts. At 10V excitation and maximum gain, full-scale readout can be obtained with strain-gauge sensitivity as low as 0.20 mV/V. An active filter is provided for noise reduction.

Bridge Connection
Bridges can be connected by 4 or 6 wires. In 6-wire connection, two lines sense the voltage applied to the bridge and compensate for lead resistance.

Resolution and Accuracy
Resolution for DP2000-S is one part in ±1999 counts, or 0.05% of full scale. Resolution for DP9000-S is one part in ±9999 counts, or 0.01% of full scale. Accuracy is 99.9% of reading. The measurement is ratiometric to reduce errors due to temperature and power-line variations. The same internal reference controls the meter gain and the excitation level.

SPECIFICATIONS
Gain Adjustment: Seven overlapping ranges with fine adjustment
Input Configuration: Differential, ratiometric
Zero Adjustment: ±225 µV/volt of excitation
Span Adjustment: 1 to 2.47 of preamp gain
Bias Current: 11 nA typ, 22 nA max
Noise Rejection
CMR, SIG GND to SIG LO: 80 dB, DC to 60 Hz
CMV, SIG GND to SIG LO: ±1 V, DC to 60 Hz
CMR, SIG GND to PWR GND: 120 dB
CMV, SIG GND to PWR GND: 1500 Vp per HV test, 354 Vp per IEC spacing
Accuracy at 25 °C
Error, Maximum ±0.05% of reading ±1 count (DP2); ±0.05% of reading ±2 counts (DP9)
Span Tempco: ±0.01% of reading/ °C
Zero Drift, Maximum: ±0.3 µV/ °C
Offset Drift, Maximum: ±(0.01% offset V ±0.01% FS V)/ °C
Step Response: 1 s to 99.9% of span
Warmup to Rated Accuracy: 30 min (DP2); 60 min (DP9)
Excitation
Configuration: Constant-voltage
Voltage Sense: Internal or remote
Voltage Range: Adjustable from 1 to 10V
Load Current, Maximum: 30 mA Conversion
Technique: Auto-zero, dual slope, average value
Signal Integration Period: 100 ms, nominal
Reading Rate: 2.5/s, nominal
Display
LED: Red, 14.2 mm (0.56"), 7-segment
LCD: 12.7 mm (0.50"), 7-segment
Power
AC Models: 120, 240 or 24 Vac +10%/-15%, 49 to 440 Hz
DC Models: 9 to 32 Vdc, isolated to 300 Vp; 26 to 56 Vdc, isolated to 300 Vp; 5 Vdc ±5%, non-isolated
Common Mode
Rejection: 120 dB
Environmental
Operating Temperature: 0 to 60 °C (32 to 140°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Humidity: 95% RH, non-condensing @ 40°C (104°F)
Mechanical
Bezel: 96 W x 48 H x 8 mm D (3.78 x 1.89 x 0.31")
Depth Behind Bezel: 139.8 mm (5.50")
Panel Cutout: 92 W x 45 mm H (3.62 x 1.77")
Weight: 17 oz (480 g)
Case Material: 94V-0 UL-rated polycarbonate
Tabulka pro objednání(Vyberte si model a zadejte počet kusů)
Číslo modelu/ Popis
Kusů
Popis
DP2000-S1 Star
15,600Kč
Dostupnost: 2 týdny
 
Strain / Microvoltmeter Indicator/ Controller, 3-1/2 digit display, red LED display, 120 Vac power, 1 mV per count analog output, scalable strain/microvolt signal input, 499 mV max input span, 4 to 10 mV gain (no control output)
DP2000-S2 Star
15,600Kč
Dostupnost: 2 týdny
 
Strain / Microvoltmeter Indicator/ Controller, 3-1/2 digit display, red LED display, 120 Vac power, 1 mV per count analog output, scalable strain/microvolt signal input, 249 mV max input span, 8 to 20 mV gain (no control output)
DP2020-S2 Star
16,380Kč
Dostupnost: 2 týdny
 
Strain / Microvoltmeter Indicator/ Controller, 3-1/2 digit display, red LED display, 120 Vac power, 0 to 10 Vdc analog output, scalable strain/microvolt signal input, 249 mV max input span,8 to 20 mV gain (no control output)
DP9000-S2 Star
Konzultujte s prodejním oddělením  
Dostupnost: 
 
 
Strain / Microvoltmeter Indicator/ Controller, 4 digit display, red LED display, 120 Vac power, 0.2 mV per count analog output, scalable strain/microvolt signal input, 249 mV max input span, 8 to 20 mV gain (no control output)
Všechny ceny zobrazeny v Kč (bez DPH)
Poznámka: Comes complete with operator’s manual.
Příklad objednávání: (1) DP2000-S2 3-1/2 digit strain gage meter, red LED, 120 Vac power, and 8 to 20 counts per mV, 15,600Kč

Tvorba čísla modelu

Sestavte si vlastní číslo modelu níže
Popis voleb:


(1) Display Resolution and Case Style vybrat z:
2 pro ±1999 counts (3 1/2 digits)
9 pro ±9999 counts (4 digits)

(2) Display & Power Options vybrat z:
0 pro LED 120 Vac (49/440 Hz) (BQ20 or BQ90)
1 pro LCD 120 Vac (49/440 Hz) (BQ21)
2 pro LED 240 Vac (49/440 Hz) (BQ22 or BQ92)
3 pro LCD 240 Vac (49/440 Hz) (BQ23)
4 pro LED 9-32 Vdc (isolated) (BQ24 or BQ94)
5 pro LCD 9-32 Vdc (isolated) (BQ25)
6 pro LED 5 Vdc** (BQ26 or BQ96)
7 pro LCD 5 Vdc** (BQ27)
8 pro LED 24 Vac (BQ28 or BQ98)
9 pro LCD 24 Vac (BQ29)
A pro LED 26-56 Vdc (isolated) (BQ2A or BQ9A)
B pro LCD 26-56 Vdc (isolated) (BQ2B)

(3) Analog Outputs vybrat z:
0 pro 1mV/count (DP2) or 0.2mV/count (DP9) analog output non-isolated. (standard)
1 pro 0-5 Vdc non-isolated (BA01)
2 pro 0-10 Vdc non-isolated (BA01)
3 pro 0-1 mA source or sink non-isolated (BA01)
4 pro 4-20 mA source or sink non-isolated (BA01)
5 pro 4-20 mA sink (high-compliance) non-isolated. (BA02)
6 pro 4-20 mA ISOLATED (BA03)

(4) Control Outputs vybrat z:
0 pro None
1 pro Dual-setpoint 10 A relay. (BDT1)
2 pro Proportional 4-20 mA control source or sink (BDP1)
3 pro Time-proportional solid-state 2 A relay plus proportional 4-20 mA control source or sink. (BDP2)
4 pro BCD (isolated latched buffered byte addressable). Includes 50-pin mass-termination connector. (BDD2)
5 pro Single-setpoint 10 A relay (BDS1)

(5) Input Type and Range vybrat z:
S1 pro Strain-gage/microvolt input plus excitation 499 mV
S2 pro Strain-gage/microvolt input plus excitation 249 mV
S3 pro Strain-gage/microvolt input plus excitation 124 mV
S4 pro Strain-gage/microvolt input plus excitation 62.5 mV
S5 pro Strain-gage/microvolt input plus excitation 31.2 mV
S6 pro Strain-gage/microvolt input plus excitation 15.6 mV
S7 pro Strain-gage/microvolt input plus excitation 7.8 mV

(6) Display Color vybrat z:
Nic (nechte pole prázdné) pro for Red Display (standard)
-G pro Green Display
Poznámka: Všechny kombinace nemusí být správné, ověřte si správnost čísla modelu.