Click on this link if you need more information about a Flow meter.
The OMEGA FMA-700A
series mass flow controllers and FMA-800A mass flowmeters extend the range of
mass flow measurement and control
from 0-5 SCCM to 1000 SLM with
50:1 turndown capability. Like all
mass flow sensors, these new units
measure mass flowrate directly,
without the need for temperature
or pressure corrections.
The FMA-700 and 800 Series work
on the heated bypass sensor tube
principle and feature corrosion
resistant stainless steel and FKM
construction and a 325 mesh (44
micron) inlet screen to prevent
contamination of the sensor. The
flow body and valve leak less than
10-8 atm-cc/sec. of helium. In the
event of a power failure, the valve is
The FMA-78P2 and FMA-78P4 are
2- and 4-channel display/power
supply/setpoint control instrumentation
boxes for use with FMA-700 and
800 Series mass flow sensors.
The units feature 000.0 to 102.4%
of full scale display, a 15 Vdc
power supply, setpoint
potentiometers (for mass flow
controllers), power cable, and an
electrical connector for connection
of the outputs.
The FMA-78P Series instrumentation
packages also have back-panel
blend control switches which select
independent/slave operations for
each channel (channel 1 is the
master), and the units include a
0-5 Vdc output for each channel
for chart recording, data acquisition,
or computer interfacing.
† Všechny ceny zobrazeny v Kč (bez DPH) Poznámka: (*)Where there is an asterix in the part number, please use the order comments to specify gas name, inlet pressure, outlet pressure, and gas temperature. EG. Helium, 150 psig, ambient temperature. Replace “-V” in part no. with “-l” for 4-20 mA output; no additional charge. For NIST traceable calibration, add suffix “-NIST” to model number and add £50/$75 to price. For calibrations with temperatures other than 20°C add £135/$200 to the price. When gas calibration is at less than 15°C or more than 30°C, there is an additional £85/$125 calibration charge.