Košík  |  Kontakt  |  English
Česko596 311 899
Mezinárodní+420 596311899

Váš zdroj informací pro měření a řízení průmyslových procesů.

Thermal Dispersion Flow Switches

FSW-6000 and FSW-7000 Series

FSW6000-7000 series Thermal Dispersion Flow Switches | FSW-6000 and FSW-7000 Series

FSW6000-7000 series Thermal Dispersion Flow Switches

16,230Kč FSW-6212

1 rok záruka RoHS
  • Simple to Install and Low Cost
  • No Moving Parts-Maintenance Free Reliability
  • Optimal Temperature Compensation — Unaffected by Temperature Gradient
  • Can Operate in Temperatures up to 120°C (248°F) with Sanitary Option
  • Have a Maximum Working Pressure of 4,300 PSI (300 bar)
  • Chain of 8 LEDs- Integrated Flow Rate/Setpoint Indication
  • Can Be Used as a Level Switch
Varibilní průtokoměry, rotametry a spínače - Zobrazit související produkty

Popis

The FSW-6000/7000 Series are thermal flow switch monitors designed to monitor flow status and also used to detect level of liquids, air and gas. A chain of 8 LED’s gives the user a visual indication of the flow rate. In addition, there isalso a dichromatic LED, which shows the switch point status of the unit. The sensing element and connection of the FSW-6000/7000 Series are made with 316 SS. The standard enclosure is glass-filled nylon and is also available in an aluminum enclosure for hazardous environments. The FSW-6000/7000 Series can be made with a great variety of process connections such as threaded, flange, or sanitary.

The FSW-6000/7000 Series line of thermal flow switch monitors is based on the principle of thermal dispersion. A typical configuration uses two platinum Resistance Temperature Detectors (RTD’s) set within the tip of the sensor. One RTD is heated a few degrees above the temperature of the medium and the other RTD is used as a reference, sensing the actual process temperature. The second RTD also monitors the temperature of the medium, as any changes in temperature must be compensated for in the first RTD. As the process medium flows over the tip of the sensor it disperses some of theheat from the first RTD. The temperature change between the two RTD's signals the probe’s electronics and the switch changes state once the set point has reached.

The FSW-6000/7000 Series may be installed in a pipe or tank using the thread or connection provided. Use only the hexagon when tightening to achieve a seal, do not use the body. The body should be rotated after tightening to leave the cable gland in suitable orientation. The FSW-6000/7000 Series is not affected by its fixing position so it may be installed at any angle around the pipe. However, it is recommended that with horizontal pipe runs the sensor should be installed on the side, into the middle of the pipe. In vertical pipes, the FSW-6000/7000 Series should be installed when there is flow in an upward direction against gravity. Care should be taken when installing the sensor that the probe extends clear of the pipe’s internal wall and is fully immersed into the flow. In pipes with smaller diameters, some care should also be taken so that the sensor is not screwed too far into the line.

SPECIFICATIONS
Accuracy: ±10% of setpoint
Repeatability: ±1% of setpoint
Power Supply:
    FSW-6000: 85 to 240 Vac (50/60 Hz)
    FSW-7000: 24 Vdc ±10%
Temperature Range:
    Process: -20 to 80°C (-4 to 176°F) [sanitary option to 120°C (248°F) for CIP]
    Operating: -20 to 60°C (-4 to 140°F)
Max Pressure: 300 bar (4351 psi)
Protection Class: NEMA 4 (IP65)
Wetted Materials: 316 SS
Enclosure Material: Glass filled nylon standard or aluminum die cast option
Process Connection: ½ to 1½ NPT, Tri-Grip™, or flange (others available, consult Flow Engineering Department)
Output: 250 Vac SPDT 5 A relay
Switch Point Adjustment: Potentiometer
Bargraph:
    Green LED: Flow rate above setpoint
    Yellow LED: Flow is at above setpoint
    Red LED: Flow is below setpoint
Switch Point Status:
    Red LED: No flow
    Green LED: Flow
Response Time: 1 to 10 seconds
Max Start up Delay: 12 seconds
Switching Range: 3 cm/s to 3 m/s (0.09 to 9.84 ft/sec) (liquid), 5 cm/sec to 15 m/sec (0.16 to 49 ft/sec) (gas)
Dimensions:
    Nylon Head: 88 Dia x 80 mm H (3.5 x 2.5" H)
    Aluminum Head: 88 Dia x 108 mm H (3.5 x 4.25")
    Insertion Length: 138, 2 and 3" standard, for other lengths consult Flow Engineering
    Weight: Approx 680 g (1.5 lb)
Tabulka pro objednání(Vyberte si model a zadejte počet kusů)

Co koupili ostatní: Když vidíte tuto ikonu, klikněte na ní a uvidíte seznam zboží, které nakoupili ostatní lidé, když si objednali tento model.

Číslo modelu/ Popis
Kusů
RoHS
Popis
  
FSW-6212 Star
16,230Kč
Dostupnost: 10 týdny
V souladu s RoHS
85 to 240 Vac, 3/4" NPT, 2" length nylon head with cable gland entry. For 1" to 4" pipes
  
FSW-6222 Star
18,590Kč
Dostupnost: 10 týdny
V souladu s RoHS
85 to 240 Vac, 3/4" NPT, 2" length aluminum head with 1/2 NPT entry. For 1" to 4" pipes
  
FSW-6512 Star
22,210Kč
Dostupnost: 10 týdny
Soulad s RoHS je neznámý
85 to 240 Vac, 1-1/2 Tri-Grip™, 2" length nylon head with cable gland entry, For 1 to 4" pipes
  
FSW-7111 Star
16,230Kč
Dostupnost: 10 týdny
V souladu s RoHS
24 Vdc, 1/2" NPT, 13/8" length nylon head with cable gland entry. For pipes up to 1"
  
FSW-7112 Star
16,230Kč
Dostupnost: 10 týdny
V souladu s RoHS
24 Vdc, 1/2" NPT, 2" length nylon head with cable gland entry. For 1" to 4" pipes
  
FSW-7121 Star
18,590Kč
Dostupnost: 10 týdny
V souladu s RoHS
24 Vdc, 1/2" NPT, 1-3/8" length, Aluminum die cas head with 1/2" NPT conduit entry. For 1" to 4" pipes
  
FSW-7122 Star
18,590Kč
Dostupnost: 10 týdny
V souladu s RoHS
24 Vdc, 1/2" NPT, 2" length, Aluminum die cas head with 1/2" NPT conduit entry. For 1" to 4" pipes
Accessories
Klikněte pro rozbalení/sbalení seznamu zobrazujícího co nakoupili otatní s tímto produktemTX4-100
TX4-100 Star
1,120Kč
Dostupnost: 2 týdny
V souladu s RoHS
30 metre reel of 4-core screened cable
Klikněte pro rozbalení/sbalení seznamu zobrazujícího co nakoupili otatní s tímto produktemLP-PS-1524
LP-PS-1524 Star
1,640Kč
Dostupnost: 2 týdny
V souladu s RoHS
DIN rail mount 24Vdc power supply. 15W, 0.63 Amp, 25mm wide. Powered by 85 to 260 Vac, 47 to 63 Hz
  
LP-PS-3024 Star
2,180Kč
Dostupnost: 2 týdny
V souladu s RoHS
24 Vdc, 1.5A power supply. DIN Rail mount. 85 to 260Vac powered
Všechny ceny zobrazeny v Kč (bez DPH)
Poznámka: Comes complete with operator’s manual.
Příklad objednávání: (1) FSW-6212 Flow Switch, 16,230Kč

Tvorba čísla modelu

Sestavte si vlastní číslo modelu níže
Popis voleb:


(1) Power vybrat z:
6 pro 85 to 240 Vac
7 pro 24 Vdc ± 10%

(2) Process Connection vybrat z:
1 pro 1/2 NPT thread
2 pro 3/4 NPT thread
3 pro 1 NPT thread
5 pro 1-1/2" Tri-Grip
6 pro 2" ANSI flange

(3) Enclosure vybrat z:
1 pro Glass filled nylon with 1/2 NPT conduit and cable gland
2 pro Aluminum die cast with 1/2 NPT conduit
3 pro Aluminum die cast with cable gland

(4) Insertion Length vybrat z:
1 pro 35 mm (1-3/8")
2 pro 50 mm (2")
3 pro 75 mm (3")
Poznámka: Všechny kombinace nemusí být správné, ověřte si správnost čísla modelu.