Košík  |  Kontakt  |  English
Česko596 311 899
Mezinárodní+420 596311899

Váš zdroj informací pro měření a řízení průmyslových procesů.

Hygienic RTD Thermowell and Removable Pt100 Sensor with M12 Connector for use in CIP Clean-In-Place Processes

PRS-TW-M12 Series Hygienic RTD Sensors

Hygienic RTD Thermowell and Removable Pt100 Sensor with M12 Connector for use in CIP Clean-In-Place Processes | PRS-TW-M12 Series Hygienic RTD Sensors

6,370Kč PRS-3-100-A-TW-0163-D1-M12

  • Clean-In-Place Design for Use in Food, Dairy and Pharmaceutical Processes
  • Standard Mounting Cap is a 1½" 16AMP Tri-GripTM (Tri-Clamp® Compatible) Design, Other Cap Sizes and Styles are Available
  • Removable Probe Assembly is Spring Loaded Into the Thermowell for Good Thermal Response
  • Available with Standard 158, 2½, 4½, 7½, and 10½" Thermowell Immersion Lengths, Other Lengths Available
  • Sensor Includes 4-Wire M12 Connector Plug for Attachment to Process Instrumentation
  • Wetted Surfaces are 316L Stainless Steel, Surface Finish = 32 Microinch or Better
  • 4-Wire, Pt100, Class A Platinum RTD Sensor (100.00 Ω0.06 ± at 0°C) Standard
  • Compatible with 3-Wire and 2-Wire RTD Instruments
Sanitární - Zobrazit související produkty

Popis

Click on this link if you need more information about Sanitary Sensors.

This Pt100 RTD sensor is designed for use in sanitary or Clean-In-Place (CIP) applications where the use of a thermowell assembly is preferred over direct immersion sensors. The thermowell includes a 1½", 16AMP cap feature for easy installation using industry standard gaskets and clamps. The spring loaded RTD probe can be removed from the thermowell without exposing the system to ambient conditions for calibration or replacement. This sensor includes a 4-Pin, M12 Connector for easy installation using an extension cable.

Sensor Specifications Include:
  • 316L stainless steel process wetted surfaces with surface finishes of 32 microinches or better.

  • Immersion lengths of 158, 2½", 4½", 7½, and 10½" are available from stock, with others available.

  • Sensor Output is a 4-wire, 100 ohm, Class A, Platinum RTD meeting the requirements of IEC 60751.

  • These sensors can be used with 2-wire or 3-wire systems see information below.

  • Insulation resistance values of 100 megohms minimum at 100 VDC.


  • These sensors are supplied standard as 4-wire assemblies with 4-pin connectors.
    When used in 3-wire applications, use pins A, B and C as shown in the wiring detail below.
    When used in 2-wire systems, connect one wire to pins A or B, and the other wire to pins C or D as shown below.

    Wiring Diagram
    Tabulka pro objednání(Vyberte si model a zadejte počet kusů)
    Číslo modelu/ Popis
    Kusů
    Popis
    PRS-3-100-A-TW-0163-D1-M12 Star
    6,370Kč
    Dostupnost: 5 týdny
     
    Removable Pt100 RTD sensor with 1½" 16AMP cap, 158" immersion length (U dimension) thermowell, spring loaded with M12 connector
    PRS-3-100-A-TW-0250-D1-M12 Star
    6,930Kč
    Dostupnost: 5 týdny
     
    Replaceable Pt100 RTD sensor with 1½" 16AMP cap, 2½" immersion length (U dimension) thermowell, spring loaded with M12 connector
    PRS-3-100-A-TW-0450-D1-M12 Star
    7,560Kč
    Dostupnost: 5 týdny
     
    Replaceable Pt100 RTD sensor with 1½" 16AMP cap, 4½" immersion length (U dimension) thermowell, spring loaded with M12 connector
    PRS-3-100-A-TW-0750-D1-M12 Star
    8,350Kč
    Dostupnost: 5 týdny
     
    Replaceable Pt100 RTD sensor with 1½" 16AMP cap, 7½" immersion length (U dimension) thermowell, spring loaded with M12 connector
    PRS-3-100-A-TW-1050-D1-M12 Star
    8,980Kč
    Dostupnost: 5 týdny
     
    Replaceable Pt100 RTD sensor with 1½" 16AMP cap, 10½" immersion length (U dimension) thermowell, spring loaded with M12 connector

    Objednávání podle čísla modelu

    Číslo modelu
    Kusů
    Číslo modelu
    Kusů


    Všechny ceny zobrazeny v Kč (bez DPH)
    Poznámka: For other cap sizes or styles, other immersion lengths, or for thermistor versions of this product, please contact Sales.

    Příklad objednávání: (1) PRS-3-100-A-TW-0163-D1-M12 Removable 4-wire Pt100 RTD sensor (100 Ω at 0°C, Class A accuracy) spring loaded in a 1½, 6,370Kč

    Tvorba čísla modelu

    Sestavte si vlastní číslo modelu níže
    Popis voleb:


    (1) Nominal Element Resistance vybrat z:
    100 pro 100 ohm @ 0 C (standard)
    1000 pro 1 kohm @ 0 C

    (2) Insertion Length vybrat z:
    0163 pro 1-5/8" insertion (2-1/2" well stem length)
    0250 pro 2-1/2" insertion (4" well stem length)
    0450 pro 4-1/2" insertion (6" well stem length)
    0750 pro 7-1/2" insertion (9" well stem length)
    1050 pro 10-1/2" insertion (12" well stem length)
    Poznámka: Všechny kombinace nemusí být správné, ověřte si správnost čísla modelu.