Košík  |  Kontakt  |  English
Česko596 311 899
Mezinárodní+420 596311899

Váš zdroj informací pro měření a řízení průmyslových procesů.

Two-Wire, Process-Loop Indicator in NEMA-4X Housing

TX83A and TX84

Two-Wire, Process-Loop Indicator in NEMA-4X Housing | TX83A and TX84

Two-Wire, Process-Loop Indicator in NEMA-4X Housing

11,190Kč TX83A

1 rok záruka OmegaCare
  • FM Intrinsic Safety Certification
  • Powered by 1 to 5, 4 to 20 or 10 to 50 mA Signal
  • 2.5 V Max Voltage Drop
  • 0.35 in (8.9 mm) LCD
  • 2,000-Count Zero Suppression or Elevation
  • 100 to 2,000 Count Span Adjust
  • Selectable Dummy Right-Hand Zero
  • -40 to 85°C Operation
  • Compact, 2.9" Diameter Die-Cast Housing
  • Waterproof to 35 kPa (5 psi)
  • Shock Resistant to 55 g

    Options
  • 1/2 EMT Conduit Fitting
  • 1/2 NPT Pipe Fitting
  • Relay-Track Mounting Adapters
  • External Explosion-Proof Housing
  • Companion Current Transmitters
Převodníky procesních signálů - Zobrazit související produkty

Popis

Model TX83A is a two-wire current-loop indicator that is powered directly by a 1-5 mA, 4-20 mA or 10-50 mA process loop signal, with a maximum voltage drop of 2.5 V. No separate power supply connections are required. This reduces overall hardware and field wiring costs and provides immunity from most electrical noise encountered in process control environments. The electronics are isolated from the case.

Readout of Process Variables
The TX83A provides extensive zero and span adjustment capability, so that it can read out directly in percent or in engineering units for process variables such as pressure, flow, temperature, or level. Its liquid crystal display provides 3 1/2 active digits, a selectable dummy right-hand zero, and four programmable decimal points. By changing two internal jumpers, the normal positive slope response of the TX83A can be reversed, so that increasing the input decreases the reading.

Easy to Configure and Calibrate
Both span and zero are fine-tuned with precision multi-turn potentiometers. These are accessible through holes in the die-cast cover, which are normally sealed with fluorosilicone plugs. Coarse zero and span steps are selected by removing the cover with attached electronics and changing plug-in jumpers.

Designed for Harsh Environments
All versions of the TX83A are rated for operation from -40 to 85°C (-40 to 185°F) with specified accuracy. The case is made of die-cast metal and is waterproof to 35 kPa (5 psi). The electronics are firmly connected to the case top, so that the meter can withstand high vibration and shock. Mounting options include a male 1/2 EMT conduit fitting and a male 1/2 NPT pipe fitting in lieu of the normal rail or surface mount. These fittings eliminate the external screw terminals and provide a NEMA-4X rating.

Intrinsic Safety Certification
FM intrinsic safety certification is standard. Intrinsic safety certification allows the unit to be used in worst-case hazardous environments with no need for explosion-proof housing, provided that an intrinsic safety barrier is used to limit the voltage and current that may be introduced in the hazardous environment. FM certification (USA) is for Class I, II, III, Division 1, Groups A,B,C,D,E,F,G. The FM certification number is 5X2AO.AX.

Explosion-proof Housing Options
Two external NEMA-7 explosion-proof and NEMA-4 waterproof, sand-cast, copper-free aluminum enclosures with corrosion resistance "safety-blue" polyester powder-coating for use in hazardous locations. FM, UL, cUL Certification: Class I, Groups B, C, D; Class II, Groups E, F, G; and Class III, Type 4X. Demko/ATEX Certification: Ex II 2 G D EEx d IIC

Option EPW3 is a single-height enclosure for one TX83A loop-powered indicator. Option EPW2 is a double-height enclosure for a TX83A loop-powered indicator on top and a TX1500 Series isolated two-wire 4-20 mA transmitter on the bottom for indicating transmitter applications. Available with two female 1/2 NPT pipe fittings, all required internal mounting hardware, and mounting flanges for a wall or bulkhead.

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models. For complete product specifications see the Related Links section at the bottom of this page.
Tabulka pro objednání(Vyberte si model a zadejte počet kusů)
Číslo modelu/ Popis
Kusů
Popis
TX83A Star
11,190Kč
Dostupnost: 2 týdny
 
Flat surface or relay track mounting
TX84-2 Star
11,820Kč
Dostupnost: 2 týdny
 
EMT conduit mounting
TX84 Star
11,820Kč
Dostupnost: 2 týdny
 
NPT pipe mounting
Accesories
MXS1 Star
400Kč
Dostupnost: 2 týdny
 
Spring retainers for TX83A in explosion proof housing EPW3
MXS2 Star
400Kč
Dostupnost: 2 týdny
 
Spring retainers for TX83A in explosion proof housing EPW2
EPW3-ATEX Star
5,360Kč
Dostupnost: 2 týdny
 
NEMA 4 and NEMA 7 rated environmental enclosure with window, single height; includes MXS1 hardware (supplied with Demko/ATEX certificate)
EPW2-ATEX Star
5,960Kč
Dostupnost: 2 týdny
 
NEMA 4 and NEMA 7 rated environmental enclosure with window, double height for TX83A and TX1500 series transmitter; includes MXS1 and MXS2 hardware (supplied with Demko/ATEX certificate)
Všechny ceny zobrazeny v Kč (bez DPH)
Poznámka: Comes with complete operator's manual.
Příklad objednávání: (1) TX83A  current loop indicator with flat surface or relay track mounting, 11,190Kč  plus (1) TX83A  current loop indicator with flat surface or relay track mounting, 11,190Kč  plus (1) TX84 current loop indicator with NPT pipe mounting, 11,820Kč  plus (1) TX84 current loop indicator with NPT pipe mounting, 11,820Kč, 11,190 + 11,190 + 11,820 + 11,820 = 46,020Kč

Tvorba čísla modelu

Sestavte si vlastní číslo modelu níže
Popis voleb:


(1) Models vybrat z:
TX83A pro CMV - Meter to Case pro 700 Vp
TX84-2 pro EMT conduit mounting
TX84 pro NPT pipe mounting

(2) Mounting Options vybrat z:
Nic (nechte pole prázdné) pro Standard Unit
-MAT1 pro Adaptor plate for surface mount or 69.9 mm relay track-Available for TX83A only
-MDT1 pro Rail clamp for DIN relay track-Available for TX83A only

(3) Calibration and Certification vybrat z:
Nic (nechte pole prázdné) pro Standard Unit with mounting options
-FS pro Custom configuration and calibration
Poznámka: Všechny kombinace nemusí být správné, ověřte si správnost čísla modelu.