Košík  |  Kontakt  |  English
Česko596 311 899
Mezinárodní+420 596311899

Váš zdroj informací pro měření a řízení průmyslových procesů.

Isolated DIN Rail Repeater/Splitter for Current Signals

DRSL-SP1

Isolated DIN Rail Repeater/Splitter for Current Signals | DRSL-SP1
Novinka

Isolated DIN Rail Repeater/Splitter for Current Signals

5,100Kč DRSL-SP1

1 rok záruka CE RoHS
  • Isolation and Conversion of Current Signals
  • Splitter Function: 1 Current Input—2 Current Outputs
  • Slimline Housing—Only 6 mm (0.24") Wide
  • Fast Response Time <7 ms
  • High Accuracy, <0.05% of Span
  • Easy-to-Use—No Setup Needed
Procesní měřící a řídící zařízení - Zobrazit související produkty

Popis

The DRSL-SP1 isolated repeater/ splitter provides a competitive choice in terms of both price and technology for galvanic isolation of current signals to SCADA systems or PLC equipment. Two current outputs are provided which mirror the single current input.

The DRSL-SP1 can be used for signal conversion of a standard process current signal into two individual analog signals. The unit offers 4-port isolation, provides surge suppression and protects control systems from transients and noise. The DRSL-SP1 also eliminates ground loops and can be used for measuring floating signals. Low power consumption facilitates DIN rail mounting without the need for any air gap. Measurement ranges are factory calibrated. The unit operates over a wide temperature range from -25 to 70°C (-13 to 158°F).

SPECIFICATIONS
CURRENT INPUT
    Measurement Range: 0 to 20.5 mA
    Functional Range: 0 to 23 mA
    Input Voltage Drop: <1.5 Vdc

CURRENT OUTPUT
Number of Outputs: 2
    Signal Range: 0 to 20.5 mA (span)
    Load: 23 mA/300 Ω maximum
    Load Stability: ≤0.01% of span/100 Ω (span = 0 to 20 mA)
    Current Limit: ≤28 mA

GENERAL
Supply Voltage (via Power Rail or Connectors): 16.8 to 31.2 Vdc
Power Consumption: 0.8 W max
Internal Consumption: 0.4 W typical/0.65 W max
Isolation: Input/output 1/ output 2/supply
Isolation Voltage (Test): 2.5 kVac
Isolation Voltage (Working): 300 Vac
Signal/Noise Ratio: > 60 dB
Response Time (0 to 90%, 100 to 10%): <7 ms
Accuracy: < ±0.05% of span
Temperature Coefficient: <±0.01% of span/°C
EMC Immunity Influence: < ±0.5% of span
Extended EMC Immunity
    NAMUR NE 21, A Criterion, Burst:
<±1% of span

ENVIRONMENTAL
Operating Temperature: -25 to 70°C (-13 to 158°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Calibration Temperature: 20 to 28°C (68 to 82°F)
Relative Humidity: 0 to 95% RH non-condensing
Protection Degree: IP20
Installation Area: Pollution degree 2 and measurement/overvoltage category II

MECHANICAL
Dimensions: 113 H x 6.1 W x 115 mm D (4.4 x 0.24 x 4.5")
Weight: 70 g (0.15 lb) approx
DIN Rail Type: DIN EN 60715 - 35 mm
Wire Size: 0.13 x 2.5 mm2/AWG 26 to 12 stranded wire
Screw Terminal Torque: 0.5 Nm
Tabulka pro objednání(Vyberte si model a zadejte počet kusů)

Co koupili ostatní: Když vidíte tuto ikonu, klikněte na ní a uvidíte seznam zboží, které nakoupili ostatní lidé, když si objednali tento model.

Číslo modelu/ Popis
Kusů
RoHS
Popis
  
DRSL-SP1 Star
5,100Kč
Dostupnost: 10 týdny
V souladu s RoHS
Isolated repeater/splitter for current signals
Accessories
  
DRSL-PWR-RAIL Star
3,300Kč
Dostupnost: 10 týdny
V souladu s RoHS
Power rail (with cover and two end covers, one right hand and one left hand), 1 m (3.3') length
Klikněte pro rozbalení/sbalení seznamu zobrazujícího co nakoupili otatní s tímto produktemDRSL-PCU
DRSL-PCU Star
2,400Kč
Dostupnost: 10 týdny
V souladu s RoHS
Power connector unit, 24 Vdc/2.5 A output to power rail
  
DRSL-MOD-STOP Star
150Kč
Dostupnost: 2 týdny
V souladu s RoHS
Module stop (screwed onto power rail to support and hold mounted devices)
Všechny ceny zobrazeny v Kč (bez DPH)
Příklad objednávání: (1) DRSL-MOD-STOP Module stop (screwed onto power rail to support and hold mounted devices), 150Kč  plus (1) DRSL-PCU Power connector unit, 24 Vdc/2.5 A output to power rail, 2,400Kč  plus (1) DRSL-PWR-RAIL Power rail (with cover and two end covers, one right hand and one left hand), 1 m (3.3') length, 3,300Kč  plus (1) DRSL-SP1 Isolated repeater/splitter for current signals, 5,100Kč, 150 + 2,400 + 3,300 + 5,100 = 10,950Kč

Manuály k zařízením:

Stáhnout Installation Guide for Signal Conditioners
Stáhnout DIN Rail Isolators and Signal Conditioners