Košík  |  Kontakt  |  English
Česko 596 311 899
Mezinárodní+420 596311899

Molten Metal Ceramic Sheath Thermocouple

NEP-TX Series

Molten Metal Ceramic Sheath Thermocouple | NEP-TX Series

Molten Metal Ceramic Sheath Thermocouple

31,240Kč NEP-TX-K-PTRS-1628-475

  • Up to 1250°C (2282°F) Temperature Rating
  • For Use in Molten Non-Ferrous Metals
  • Connection Head with Terminal Block
  • Custom Probe Lengths Available
  • Available in Dual Element
  • High Temperature Thermal Shock Resistance
  • Corrosion Resistance
  • 1¼ NPT Mounting Thread Standard
Termočlánky - Zobrazit související produkty


OMEGATITE™ 650 is the ceramic sheath which is an alloy of silicon nitride and aluminum oxide. This superior refractory material has the combined properties of silicon nitride (high strength, hardness, fracture toughness, and low thermal expansion) and aluminum oxide (corrosion resistance, chemically inert, high temperature capabilities, and oxidation resistance). Not recommended for caustic solutions and hydrofluoric acid.

Most refractory products can be used only in high temperature applications where one or two of the following properties are required: thermal shock resistant, mechanical strength, corrosion resistance, abrasion resistance or electrical insulation. OMEGATITE™ 650 combines all these properties in one refractory material. Preheating of the process is not necessary.

OMEGATITE™ 650 is uniquely qualified for non-ferrous molten metal applications and high wear or high impact environments up to 1250°C (2282°F).

OMEGATITE™ 650 is non-wetting for most non-ferrous metals. It is gas tight, chemically inert, resistant to corrosion and metal attack, and features high strength, hardness, and thermal shock resistance.

OMEGATITE™ 650 thermocouple sheaths are used extensively for continuous measurements in nonferrous metals. In molten aluminum, OMEGATITE™ 650 is thermally shock resistant, nonwetting, does not contaminate the melt, provides continuous, reliable temperature measurement, and is resistant to degradation even in aggressive aluminum lithium alloys.
Tabulka pro objednání(Vyberte si model a zadejte počet kusů)
Číslo modelu/ Popis
Quick Ship
Dostupnost: 8 týdny
Type K Probe, 475mm (18.75in.) length, 28mm (1.10 in.) diameter
Quick Ship
Konzultujte s prodejním oddělením  
Type N Probe, 475mm (18.75in.) length, 28mm (1.10 in.) diameter
Všechny ceny zobrazeny v Kč (bez DPH)
Poznámka: Ceramic tube packaged separately to avoid breakage during shipping. Shipped unassembled.

Tvorba čísla modelu

Sestavte si vlastní číslo modelu níže
Popis voleb:

(1) Select Calibration vybrat z:
K pro Type K
N pro Type N

(2) Select Probe Length (in increments of 150mm) vybrat z:
475 pro 475mm (18.75in.) - Standard Length
CUSTOM pro Select a custom length in increments of 150mm (6 in.)

(3) -DUAL vybrat z:
Nic (nechte pole prázdné) pro Standard Configuration
-DUAL pro Dual Element
Poznámka: Všechny kombinace nemusí být správné, ověřte si správnost čísla modelu.