Košík  |  Kontakt  |  English
Česko 596 311 899
Mezinárodní+420 596311899

Strain Gauge Adhesives and epoxy

TT300, SG496, SG401

Strain Gauge Adhesives and epoxy | TT300, SG496, SG401

Strain Gauge Adhesives and epoxy

7,650Kč TT300

RoHS
  • Strain Gauge Adhesives
  • Two 1 oz Hardener Bottles (1/2 Filled)
  • Two Plastic Funnels (35 mm Dia.)
  • Two Brush Caps
  • One 2 oz Bottle of Acetone
  • One 2 oz Bottle of Acid Primer
  • One 2 oz Bottle of Neutralizer
  • One 2 oz Bottle of Resin Solvent
  • Operator’s Manual
Tenzometry a příslušenství - Zobrazit související produkty

Popis

OMEGA’s TT300 cement is a heat-cured, 2-part epoxy adhesive that can be used to bond polyimide-backed strain gauges for strain measurement up to 200°C (392°F). Each TT300 kit includes 2 bottles of resin and hardener that are pre-measured to ensure proper mixing proportions. To use, simply pour one bottle of hardener into one bottle of resin and shake for 1 minute.

A bottle each of hardener and resin produce approximately 3/4 oz of adhesive. The shelf life of the resin-hardener mixture is 6 weeks at room temperature. The shelf life of the unmixed components is indefinite, provided that the bottles are kept tightly sealed. Each TT300 kit includes 2 oz of acetone, acid primer, neutralizer, and rosin solvent for cleaning and preparing the surface, as well as 2 funnels and 2 cap brushes.

SG496 and SG401 are general purpose cold-curing, 1-part strain gauge glues. They are the most commonly used adhesives for strain gauges. They cure in 1 minute, but require 24 hours to set. SG401 is an ethyl-based cyanoacrylate, and SG496 is a methyl-based cyanoacrylate. They have a 1-year shelf life at room temperature, but shelf life may be longer at colder temperatures. The strain gauge gluetemperature range is -54 to 82°C (-65 to 180°F).

NOTE: Additional Hazardous Materials carrier handling surcharges may apply for products on this page. You will be contacted by Internet Sales to confirm after the order is placed.
Tabulka pro objednání(Vyberte si model a zadejte počet kusů)

Co koupili ostatní: Když vidíte tuto ikonu, klikněte na ní a uvidíte seznam zboží, které nakoupili ostatní lidé, když si objednali tento model.

Číslo modelu/ Popis
Kusů
RoHS
Popis
Quick Ship
Klikněte pro rozbalení/sbalení seznamu zobrazujícího co nakoupili otatní s tímto produktemTT300
TT300
7,650Kč
Dostupnost: 2 týdny
V souladu s RoHS
Complete strain gauge adhesive kit including heat cure TT300 Cement
Quick Ship
Klikněte pro rozbalení/sbalení seznamu zobrazujícího co nakoupili otatní s tímto produktemSG496
SG496
1,020Kč
Dostupnost: 2 týdny
V souladu s RoHS
1 oz methyl-based cyanoacrylate for metals (approx. 750 gages)
Quick Ship
Klikněte pro rozbalení/sbalení seznamu zobrazujícího co nakoupili otatní s tímto produktemSG401
SG401
330Kč
Dostupnost: 2 týdny
V souladu s RoHS
0.1 oz ethyl-based cyanoacrylate for porous materials (approx. 50 gages)
Všechny ceny zobrazeny v Kč (bez DPH)