Košík  |  Kontakt  |  English
Česko 596 311 899
Mezinárodní+420 596311899

Load Cell and strain gauge amplifier/transmitter


Load Cell and strain gauge amplifier | TXDIN1600S

Load Cell and strain gauge amplifier

6,010Kč TXDIN1600S

  • Load cell or strain gauge amplifier/signal conditioner with selectable Full Scale Outputs of: 0-20 mA, 4-20 mA, 0-10 V ±10 V
  • Input Range -7.6 to +7.6 mV/V max. User Selectable
  • 5 Vdc Bridge Excitation Built-In
  • Contact Closure Input for Remote Tare
  • 0 to 20 Second Input Filter
  • 2 to 6 Point Scaling for Non-linear Inputs
  • 10 or 80 Samples/Second
  • Easy Scaling and Set-Up Via USB and Free Software
Příslušenství - Zobrazit související produkty


Find how signal conditioning works on this link.

Omega's TXDIN1600S is a DIN rail mount amplifier for load cell or strain gauge inputs. Software available for free download allows the user to configure and scale the transmitter easily via a built-in mini USB port. Additionally, the user may read live process data through the software, allowing for offset and span calibration

Outputs can be either voltage, bipolar voltage or active/passive process current. The unit is powered by 10 to 48 Vdc or 10 to 32 Vac and is suitable for battery operation.

The high precision input stage of the device allows for a bridge excitation voltage of 5 Vdc to be used as opposed to the traditional 10V. This reduces the power requirement for the bridge supply and up to four bridges (load cells) may be connected to the input.

Advanced features such as remote tare, multi-point scaling, filtering and built-in bridge excitation make this transmitter suitable for a wide variety of applications.


Full Range: -7.6 to +7.6 mv\V; -38 to +38 mV @ 5V excitation
Type: Four Wire Ratiometric
Drift: < ± 0.05 %
Linearity: ± 0.01 %
Update Rate: Selectable, 10 or 80 SPS (Samples per second)

Voltage: 5 Volts DC ± 0.1 V @ 59 mA
Bridge Impedance: Total 85 to 10000 Ω (operates with four 350 Ω load cells in parallel)

Type: Remote volt free contact, up to 10 metres distance

Current Source: Range 0 to 21.5 mA , Max Load 750 Ω
Current Sink: Range 0 to 21.5 mA , Supply 10 to 30 V dc, Voltage effect 0.2 uA/V
Accuracy: (mA Out/ 2000) or 5 uA which ever is the greater, Drift 1 uA/°C

Range: 0 to 10.1 V or -10.1 to 10.1 V, Accuracy ± 5 mV
Current Drive: ± 2 mA, Min load 5000 Ω @ 10 V

Type: Independent “low” “High” front panel push buttons allow user to manually set low and high output points.

Range: 10 to 48 VDC, 10 to 32 VAC Protected by internal 500 mA resettable fuse.
Power: < 1 W Full Power

Isolation: Supply to input to output 500 V dc.
Indication: LED, Green when output -0.1 to 100.1 %, else red

Type: USB 2.0
Baud rate: 19,200 baud
Equipment: PC running windows XP or later, USB cable.

Calibration Scaling: 2 to 6 points signal against process
Filter: 1 to 20 Seconds to reach 70 % of final value
Tare: Remote set tare offset with programmable user set point.
Active Calibration: Active Calibration against live load cell
Process Units: 4 Characters
Tag Number: 20 Characters
Process Output: Process Output Range
Signal Output: Select type, signal range
Active scaling output: Set output process range against active sensor input
Sensor Information: Model, sensitivity and balance

Operating Ambient: -30 to +70 °C ; 10 to 90 %RH (non condensing)
Storage Ambient: -30 to +70 °C ; 10 to 90 %RH (non condensing)
Configuration Ambient: 10 to 30 °C
Installation Enclosure: DIN Rail enclosure offering Protection >= IP65.

CE: BS EN 61326

Style: DIN 43880, Colour grey, material Polyimide 6.6
Weight: < 70 grams
Dimensions: 90 mm H x 15.5 mm W x 56.4 mm D
Terminals: 2.5 mm Maximum

Tabulka pro objednání(Vyberte si model a zadejte počet kusů)

Co koupili ostatní: Když vidíte tuto ikonu, klikněte na ní a uvidíte seznam zboží, které nakoupili ostatní lidé, když si objednali tento model.

Číslo modelu/ Popis
Quick Ship
Dostupnost: 6 týdny
Load cell or Strain gauge amplifier, transmitter and Signal Conditioner. DIN Rail Mount.
Accessories (For details see Related Products links below)
Quick Ship
Klikněte pro rozbalení/sbalení seznamu zobrazujícího co nakoupili otatní s tímto produktemUWTC-CABLE
Dostupnost: 5 týdny
USB Cable
Quick Ship
Klikněte pro rozbalení/sbalení seznamu zobrazujícího co nakoupili otatní s tímto produktemLP-PS-1524
Dostupnost: 2 týdny
DIN rail mount 24Vdc power supply. 15W, 0.63 Amp, 25mm wide. Powered by 85 to 260 Vac, 47 to 63 Hz
Quick Ship
Klikněte pro rozbalení/sbalení seznamu zobrazujícího co nakoupili otatní s tímto produktemTX4-100
Dostupnost: 2 týdny
4-Core 7/0.2 mm screened cable white, red, green & black with drain wire, 30 metres
Všechny ceny zobrazeny v Kč (bez DPH)